Windows 7 Insists on 100 MB or 200 MB system partition Here's how to avoid creating this system partition
#1
Posted 29 December 2008 - 01:17 PM
With the most recent build, I chose to remove all partitions and install, and when I did that it said windows 7 may create additional partitions and again it did a 200 mb partitions, which is hidden from "computer".
There's a way to prevent Windows 7 from creating this partition without the need to third-party partition tools or an XP/Vista CD.
1) Start Windows 7 setup.
2) Once it has started, press Shift+F10 to start the command prompt.
3) Start diskpart and create a primary partition of the size you need. Or, if you don't want to partition, format your drive. Make sure you format the primary partition so that there is no unpartitioned space before the partition where you want to install Windows 7.
4) Exit diskpart.
5) Continue with setup and choose the disk.
Since the drives are partitioned already, Windows 7 will not create this system partition.
Also, note that when you are at the point of selecting a partition to install Windows 7 to, and you choose to format the partition using that GUI interface, then Windows 7 will take the liberty create the system partition as mentioned above.
If you do decide not to let Windows 7 create a system partition, be aware of the following: Disadvantages of skipping system partition as noted by cluberti.
And now, here's the original discussion about the use for the system partition. Anyone know any more on this? Share your thoughts.
#2
Posted 30 December 2008 - 01:08 AM
#3
Posted 31 December 2008 - 08:52 PM
etso, on Dec 30 2008, 01:08 AM, said:
Dun think so if it is used for system restore or complete pc restore as 200mb is insufficient for the whole os which by default installation uses 10.7gb of hdd space...
This post has been edited by finderz: 31 December 2008 - 08:54 PM
#4
Posted 01 January 2009 - 05:00 AM
finderz, on Jan 1 2009, 03:52 AM, said:
etso, on Dec 30 2008, 01:08 AM, said:
Dun think so if it is used for system restore or complete pc restore as 200mb is insufficient for the whole os which by default installation uses 10.7gb of hdd space...
If it's true, then it's the first OS that's one giant rootkit.
GL
#5
Posted 04 January 2009 - 09:52 PM
#6
Posted 08 January 2009 - 09:35 AM
#7
Posted 10 January 2009 - 10:36 PM
When you start your machine, the stuff in the System Partition (like bootmgr, BCD store) gets loaded first (since the partition is marked Active). Next, the bootmgr loads up full fledged OSes (like XP, Vista or Win7) located in other larger OS partitions. This 2-phase approach allows Windows to quickly and easily load up the bootmgr without having to worry about advanced disk or volume functionality offered by drivers like BitLocker. In the second phase, the advanced functionality can be activated when the overall OS loads up.
BTW, this 200 MB partition has nothing to do with the GPT protective partition. It is recommended that you don't use this partition to store other things.
Hope this helps and clears things up.
#8
Posted 11 January 2009 - 07:29 PM
deep debroy, on Jan 10 2009, 11:36 PM, said:
Well, I'll admit you're partially correct. The 200MB partition is for EFI compatibility, and is thus a GPT-protected partition. This is actually created during initial creation of GPT-formatted disks during Vista setup, and thus is actually part of the GPT functionality in the system, but I will correct myself if we're going to be nit-picky - it is a 200MB system partition for compliance with Microsoft's stated point that the EFI system partition be the first partition on the disk. It's part of the initial creation of GPT volume(s) on the disk, but it's ultimate usage is to be the EFI system partition. The reason it's related to GPT-partitioning is that an EFI system partition MUST be on a GPT-formatted volume, hence my reply.
#10
Posted 14 January 2009 - 11:22 PM
killerb255, on Jan 14 2009, 04:48 PM, said:
I believe it does so on a clean boot, but you can manually set up partitions if you like. However, if you let Vista do it, by default it creates GPT partitions. I haven't reinstalled it yet, so I could be wrong, but I believe you can do it manually if you'd like.
#11
Posted 16 January 2009 - 05:51 AM
Is the 200Mb partition used for boot or for recovery?
And what would be the disadvantage of self partitioning your harddisk and Windows 7 using that partition without the 200Mb partition but a directory instead of it on the partition used?
#12
Posted 16 January 2009 - 11:09 AM
#13
Posted 16 January 2009 - 11:45 AM
Ex:
No partitions -> New -> 40GB = two partitions (200mb + 40GB)
Delete 40GB, select partition 200mb, click in extend and resize to 40GB.
It is the same size for the message when you disable the swap partition in C:\
Maybe it is for the same use.
This post has been edited by Rhyel: 16 January 2009 - 12:08 PM
#14
Posted 16 January 2009 - 02:38 PM
#15
Posted 17 January 2009 - 09:51 AM
#16
Posted 24 January 2009 - 03:35 PM
maybe you have a solution. I have a dual boot system with Vista and W7. W7 sees the 200MB partition as what it is and does not assign a drive letter. Vista however, has assigned a driveletter to that 200MB partition (D:) and won´t let me change or remove that drive letter, not even using diskpart. Any ideas how to fix this easily ?
edit: I have managed to hide the partition with Paragon Partition Manager from within Vista. That fixed the problem.
Ist this not possible without that tool ??
Thanks,
Alex
#17
Posted 23 February 2009 - 09:48 AM
#18
Posted 24 February 2009 - 10:07 AM
#19
Posted 24 February 2009 - 11:17 AM
#20
Posted 24 February 2009 - 07:09 PM
No telling what this is caused by.
- ← Upgrade from win 7 64bit RC to full version?
- Windows 7
- add new images to the random desktop wallpapers →



Help
Back to top













