Gradius2

The Solution for Seagate 7200.11 HDDs

4,868 posts in this topic

As far as I can say it went into 0 LBA while my PC booting. A month ago, when this happened, the RAID-BIOS said failed and when I deactivated the RAID-controller BIOS said "HDD S.M.A.R.T. CAPABILITY: NONE". Unfortunately my next action was not to look into the drive configuration of the Setup Utility, I first tried a few other thinks (different controller, different cables, different HDD-PCB) - all without sucess before I saw, that the drive is still recognized, but with all drive parameters set as 0 and without any capacity.

EDIT: Thanks for your help, but neither m0,1,1,0,0,0,0,22 nor m0,1,1,2,2,0,0,22 are working, the same error as described in Post 65 appears.

Please, let me know the fully model, firmware version, P/N and Date Code.

Gradius

0

Share this post


Link to post
Share on other sites
67:9SZ*****:ST3320613AS:9FZ-162-300:SD11:08391:2008-03-29:TK:2008-08-01:2008-12-22:OEM:kadolf:Germany:(0GB reported):WinServer 2k8 x64

Has this fix been tested on other non-SD15, 7200.11 drives?

0

Share this post


Link to post
Share on other sites

Hi. I hope you can use this data: ST3320613AS, P/N 9FZ162-300, FIrmware: SD11, Date Code: 08391; Site Code: TK. Many thanks for your commitment!

I'll be off for the next hours - it's 12:30am in Germany and I've to work tomorrow. Good night ;)

Edited by kadolf
0

Share this post


Link to post
Share on other sites

hi i live in Turkey and i have a dead st3500320as.

it is 6 month old and its problem is BSY.

it was raid 0 so my whole data has gone away.

and rma doesnt accept because of a ... tiny broken part at my harddisk.

you can see at the link below

http://img294.imageshack.us/img294/6710/20090115065yz1.jpg

so my request is do you have any possibilty to put pictures of hardware part

ty

0

Share this post


Link to post
Share on other sites
hi i live in Turkey and i have a dead st3500320as.

it is 6 month old and its problem is BSY.

it was raid 0 so my whole data has gone away.

and rma doesnt accept because of a ... tiny broken part at my harddisk.

you can see at the link below

http://img294.imageshack.us/img294/6710/20090115065yz1.jpg

so my request is do you have any possibilty to put pictures of hardware part

ty

did u see this page?

http://www.msfn.org/board/index.php?showto...20&start=20

0

Share this post


Link to post
Share on other sites
Hi. I hope you can use this data: ST3320613AS, P/N 9FZ162-300, FIrmware: SD11, Date Code: 08391; Site Code: TK. Many thanks for your commitment!

I'll be off for the next hours - it's 12:30am in Germany and I've to work tomorrow. Good night ;)

Hmm, it's a 320GB. By entering S/N on Seagate's site, it appear as AFFECTED, or not?

Since Seagate is still studying if they will release a firmware for that model, the best bet is to wait to get a new firmware for your drive, or just use the warranty and RMA it, after all they'll fix and recovery the datas, so no data loss (?).

I don't want to alarm you, but this "Error 1008 DETSEC 0000500D" is related to hardware failure. Your drive is refusing to write any information to the plates, another probably is caused by a serious SD11 bug (even worst than SD15), this is why I mentioned about a firmware update first.

Gradius

Edited by Gradius2
0

Share this post


Link to post
Share on other sites

Also make sure you have Flow Control OFF!

So connect everything, power the drive up open hyperterminal-->connect and hit CTRL+Z - if you don't see the F3 T> prompt, something isn't right with your hookup.

i have a 7200.11 with the LBA0 problem

I'm trying to fix the drive but i cannot get any output from the console, i know the cable is working because i tested it with another device and i get output

anyone else has this problem too?

0

Share this post


Link to post
Share on other sites
Also make sure you have Flow Control OFF!

So connect everything, power the drive up open hyperterminal-->connect and hit CTRL+Z - if you don't see the F3 T> prompt, something isn't right with your hookup.

i have a 7200.11 with the LBA0 problem

I'm trying to fix the drive but i cannot get any output from the console, i know the cable is working because i tested it with another device and i get output

anyone else has this problem too?

Hey fatlip he fixed the drive already: :hello:

http://www.msfn.org/board/index.php?showto...st&p=828505

Gradius

0

Share this post


Link to post
Share on other sites
hi i live in Turkey and i have a dead st3500320as.

it is 6 month old and its problem is BSY.

it was raid 0 so my whole data has gone away.

and rma doesnt accept because of a ... tiny broken part at my harddisk.

you can see at the link below

http://img294.imageshack.us/img294/6710/20090115065yz1.jpg

so my request is do you have any possibilty to put pictures of hardware part

ty

did u see this page?

http://www.msfn.org/board/index.php?showto...20&start=20

now i see

but my motherboard is ASUS P5Q and i dont have a rs232 port on it :(

i wish there were a solution through sata without anything else

cant seagate write a program that will fix this problem through sata ?

best free online pokemon game on the internet PokemonCraft

You can also check this awesome pokedex kanto

Edited by cefurkan
0

Share this post


Link to post
Share on other sites
now i see

but my motherboard is ASUS P5Q and i dont have a rs232 port on it :(

You'll need to buy this:

USB_to_RS232_cable.jpg

http://www.valleyseek.com/product.action?itemID=2570

EDIT :realmad:

You need to know better your motherboard, it HAS a Serial port, on page 2-33 from english manual, you'll see the COM port there. Is labed as COM1 too.

Gradius

i wish there were a solution through sata without anything else

cant seagate write a program that will fix this problem through sata ?

For CC, BSY and 0 LBA errors, is just IMPOSSIBLE to fix it by means of software only and without this guide, or something very very expensive tool (over US$ 10k) like PC-3000.

Gradius

Edited by puntoMX
0

Share this post


Link to post
Share on other sites
i wish there were a solution through sata without anything else

cant seagate write a program that will fix this problem through sata ?

For CC, BSY and 0 LBA errors, is just IMPOSSIBLE to fix it by means of software only and without this guide, or something very very expensive tool (over US$ 10k) like PC-3000.

Gradius

i will first apply customer rights at Turkey for claiming this product is till under warranty and rma has to replace it

if i loose at there too i will try this

rma doesnt replace my hdd because of a tiny broken part can see at below

http://img118.imageshack.us/img118/1509/20090115065so2.jpg

0

Share this post


Link to post
Share on other sites

WOW! My st3500320as is back!!!

Big Thanks to everybody here! Especially Gradius2, pitch, dilosolid, fatlip, StephenB~!

I'm so happy~!

Edited by killerB
0

Share this post


Link to post
Share on other sites

WHOO HOOOOOOOO!!!!!!

ITS ALIVE!!!!!!!!

Extra special thanks to everyone who worked towards the BSY fix and all those people who took the time to help me and reply to all my questions.

I couldn't wait for my rs232 adapter that i ordered so i gambled and modified a nokia 3210 data cable and it worked. (Just with the RX TX connected..And SATA power to the drive of course).

Fortunately after I recovered the BSY fault, my drive was recognised as its proper size by my bios sata.

As we speak my data is being dumped from the drive to a different one.

Guy's i owe one hell of a lot of data to you lot.

THANK YOU!!!

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.