Jump to content

Welcome to MSFN Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account



Photo

The Solution for Seagate 7200.11 HDDs

- - - - -

  • Please log in to reply
4755 replies to this topic

#4051
Blackan

Blackan
  • Member
  • 2 posts
  • Joined 13-January 12
  • OS:Vista Ultimate x64
  • Country: Country Flag
Great.

Waited, powered down, checked it. Showed up in bio, but still didn't load OS. Plugged back into working pc, did the fix for 0 LBA problem, now its working. :)

Thank you very much.


How to remove advertisement from MSFN

#4052
marcobid

marcobid
  • Member
  • 1 posts
  • Joined 16-January 12
  • OS:none specified
  • Country: Country Flag
Thank you very much.

Ho sistemato il mio Seagate Barracuda 7200.11 da 500gb recuperando tutti i dati.
La Seafate mi ha chiesto per la riparazione del disco dalle 800 alle 1.300 euro, con la tua soluzione ho speso 20 euro compreso il cacciavite Torx 6

Great, Marco

#4053
farafafafafa

farafafafafa
  • Member
  • 3 posts
  • Joined 15-January 12
  • OS:XP Pro x64
  • Country: Country Flag
Hallo Y cant find the CA42 cabel,cab Y do it?whit USB cabel? please y nedd it thanks

#4054
dsdeez83

dsdeez83
  • Member
  • 4 posts
  • Joined 17-January 12
  • OS:Vista Home Premium x64
  • Country: Country Flag
(I'm a Newbie)Hey Guys : I've read the threads and followed the instructions for what I believe is the 0 LBA error. I ran the bios and the HD shows up so I would believe that's the case. I run through the instructions with this http://www.ebay.com/...984.m1497.l2649 tool. I'm using a firewire to USB cable. The process i follow is the same as on thread #1, I power the HD after I have the hyperterminal configured and connected. I run the "m0,2,2,0,0,0,0,22" (enter) cmd and my results similar but the User Partition says : User Partition Format Successful - Elasped Time 0 mins 00 sec. I than power down, disconnect and move the HD to the PC and power up but I still get that same error. Your assistance is grately appreicated.

Attached Files



#4055
smandurlo

smandurlo

    Newbie

  • Member
  • 40 posts
  • Joined 12-December 11
  • OS:none specified
  • Country: Country Flag
@dsdeez83 your output is not normal, all the values in the first line are 00 and it is wrong. What was the problem? I believe you did something that ruined your access to stored data...

#4056
dsdeez83

dsdeez83
  • Member
  • 4 posts
  • Joined 17-January 12
  • OS:Vista Home Premium x64
  • Country: Country Flag

@dsdeez83 your output is not normal, all the values in the first line are 00 and it is wrong. What was the problem? I believe you did something that ruined your access to stored data...


My problem is my Seagate 7200.11 HDD wont boot, but in BIOS is it recognized. I also set it up as a Secondary HDD and it reflects in Windows as "0".

#4057
dsdeez83

dsdeez83
  • Member
  • 4 posts
  • Joined 17-January 12
  • OS:Vista Home Premium x64
  • Country: Country Flag


@dsdeez83 your output is not normal, all the values in the first line are 00 and it is wrong. What was the problem? I believe you did something that ruined your access to stored data...


My problem is my Seagate 7200.11 HDD wont boot, but in BIOS is it recognized. I also set it up as a Secondary HDD and it reflects in Windows as "0".



I also wanted to add, I have HP24 Firmware vs some of these threads showed a seagate firmware.

#4058
farafafafafa

farafafafafa
  • Member
  • 3 posts
  • Joined 15-January 12
  • OS:XP Pro x64
  • Country: Country Flag
please I need help .I ¨m using CA42 cabel y have black GND green und white tx und rx end one red no more.I connect blacr white and green I put power to de hdd but in the hyperteminal when I write dont show anything.Need I to conect 3V, and where only have I de red.please what can I do??

#4059
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,593 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

please I need help .I ¨m using CA42 cabel y have black GND green und white tx und rx end one red no more.I connect blacr white and green I put power to de hdd but in the hyperteminal when I write dont show anything.Need I to conect 3V, and where only have I de red.please what can I do??

READ FGA's:
http://www.msfn.org/...-720011-drives/
expecially #6 AND the link given

jaclaz

#4060
BlouBul

BlouBul

    Advanced Member

  • Member
  • PipPipPip
  • 409 posts
  • Joined 13-July 10
  • OS:Windows 7 x86
  • Country: Country Flag

but the User Partition says : User Partition Format Successful - Elasped Time 0 mins 00 sec. I than power down, disconnect and move the HD to the PC and power up but I still get that same error. Your assistance is grately appreicated.

The only other thing I can think of that might work is to try the optional commands given by Aviko here

I also wanted to add, I have HP24 Firmware vs some of these threads showed a seagate firmware.

All HP firmware before HP26 suffer from the same symptoms (and uses the same fix)
Jack of all trades, master of none, though ofttimes better than master of one.

#4061
ukiahaprasim

ukiahaprasim
  • Member
  • 2 posts
  • Joined 20-January 12
  • OS:none specified
  • Country: Country Flag
Hello.

I dont understand nothing about electronics... can anyone help me?

Are these converters valid for trying to unbrick my HDD?


RS232 To TTL Converter Module Built-in MAX232CPE Transfer Chip With 4PCS Cables
http://www.ebay.es/i...=item3f0fabb730


RS232 To TTL Converter MAX232EPE W/ Power + 4pcs cable
http://www.ebay.es/i...=item27bb5df7d5

MAX232EPE? MAX232CPE?...

regards.

Ukiah

#4062
Huygens

Huygens

    Newbie

  • Member
  • 21 posts
  • Joined 06-September 11
  • OS:none specified
  • Country: Country Flag

Are these converters valid for trying to unbrick my HDD?
http://www.ebay.es/i...=item3f0fabb730
http://www.ebay.es/i...=item27bb5df7d5

Both are (USB) powered with 5V, so I doubt they work, as they may end up sending a signal with too high voltage to the HD.

#4063
dsdeez83

dsdeez83
  • Member
  • 4 posts
  • Joined 17-January 12
  • OS:Vista Home Premium x64
  • Country: Country Flag


but the User Partition says : User Partition Format Successful - Elasped Time 0 mins 00 sec. I than power down, disconnect and move the HD to the PC and power up but I still get that same error. Your assistance is grately appreicated.

The only other thing I can think of that might work is to try the optional commands given by Aviko here

I also wanted to add, I have HP24 Firmware vs some of these threads showed a seagate firmware.

All HP firmware before HP26 suffer from the same symptoms (and uses the same fix)


So you are suggesting the extra coding in the hyperterminal? correct

Drive is busy example, not solution: drive ST3500320AS SD15 remove 3 screws nearest heads connector, motor connected, put something between pcb and hda to lift pcb and prevent contact.power on, wait until drive stops motor, if you dont wait at this moment you got 000000CE error after next command
(ctrl+z)
F3 T>/2
F3 2>Z
Spin Down Complete
Elapsed Time 0.146 msecs
remove isolation and mount pcb as normal
F3 2>U
Spin Up Complete
Elapsed Time 6.864 secs
Quote
this part is not necessary, just checking is everything ok, use when first try fails (F712 work only on 500g 7200.11 with firmware SD15, when you updated f/w just skip this part
F3 2>/
F3 T>F712
Byte:0712: RealTimeUpdatedFlags = 00 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 0 <- configuration not loaded from surface
F3 T>F,,22
Drive Configuration restored to defaults.
F3 T>F712
Byte:0712: RealTimeUpdatedFlags = 08 00
Byte:0712: Bit:0, HPA_SET_BY_SETMAX = 0
Byte:0712: Bit:1, HPA_SET_BY_SETMAX_EXT = 0
Byte:0712: Bit:2, DCO_SET_ACTIVE = 0
Byte:0712: Bit:3, CONGEN_READ_FROM_MEDIA = 1 <- done
F3 T3>/1
F3 1>N1
F3 1>/
F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000
User Partition Format 5% complete, Zone 00, Pass 00, LBA 00008DED, ErrCode 00000080, Elapsed Time 0 mins 05 secs
User Partition Format Successful - Elapsed Time 0 mins 05 secs
F3 T>
(finished, power off, connect disk to pc and check your data)

#4064
BlouBul

BlouBul

    Advanced Member

  • Member
  • PipPipPip
  • 409 posts
  • Joined 13-July 10
  • OS:Windows 7 x86
  • Country: Country Flag

So you are suggesting the extra coding in the hyperterminal? correct

Correct Posted Image
Jack of all trades, master of none, though ofttimes better than master of one.

#4065
ukiahaprasim

ukiahaprasim
  • Member
  • 2 posts
  • Joined 20-January 12
  • OS:none specified
  • Country: Country Flag


Are these converters valid for trying to unbrick my HDD?
http://www.ebay.es/i...=item3f0fabb730
http://www.ebay.es/i...=item27bb5df7d5

Both are (USB) powered with 5V, so I doubt they work, as they may end up sending a signal with too high voltage to the HD.


too high Voltage signal on RXD - TXD?..

Both converters are theoretically "3.3V to 5V Power Input."...

I was thinking about use another power source (like AA batteries), not usb cable- using two aditional pins (they are labeled as gnd-+5v, but I suppose it can works with +3,3v - +5v)

I am not sure about chip used, MAX232CPE - MAX232EPE... I don´t know if they works exactly as MAX232

Ukiah

#4066
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,593 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

I am not sure about chip used, MAX232CPE - MAX232EPE... I don´t know if they works exactly as MAX232

I am sure.
99% of adapters built around a MAX232 will give 5V TTL signal level (NO good).
Usually converters based on Maxim are with chip MAX 3232 which operates at 3.3V TTL levels (good :)).
There is NORMALLY no connection between Power voltage and TTL level, it depends not only on the chip used but also on the circuitry, you can well build a converter powered at 5 V AND using a MAX232 BUT outputting 3.3V TTL level (good :)):
http://www.mbarron.net/mbus/
http://www.panuworld...bles/basics.htm
A MAX 232 with no transistor or zener to pull down the level WILL NOT work, some adapters may (if powered at around 3 V)
see more on points #6 and #10 of read-me-first:
http://www.msfn.org/...-read-me-first/

Since you are paying money to buy the adapter you should be able to ask the seller EXACT specs (and if not compatible get another adapter, by now several tens reported to be working were listed in this thread).


jaclaz

#4067
martinlink

martinlink

    Newbie

  • Member
  • 17 posts
  • Joined 25-January 12
  • OS:Windows 8 x64
  • Country: Country Flag
http://www.ebay.com/...=item2a149b78a7

Will this one work? As I see from the pictures, it has pins to power it at 5v and 3,3v. If it should work, how do I connect the 3,3v pin to power it at that voltage? Do I connect it with a jumper to the VCC pin on the end?
Thanks!

#4068
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,593 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

http://www.ebay.com/itm/PL2303HX-USB-TTL-Converter-Module-/180734359719?pt=LH_DefaultDomain_0&hash=item2a149b78a7

Will this one work? As I see from the pictures, it has pins to power it at 5v and 3,3v. If it should work, how do I connect the 3,3v pin to power it at that voltage? Do I connect it with a jumper to the VCC pin on the end?
Thanks!

WHY it is so difficult to READ the READ-ME-FIRST? :w00t:

And in this particular case, READing the message just above yours? :unsure:

VOLTAGE (POWER) is NOT connected to TTL level (if not on a few particular adapters, mentioned in the READ-ME-FIRST).

Ask the seller of the item for PROPER specifications (or find another seller that provides them)! :realmad:

You CANNOT from a picture decide what an adapter does.

For the record that adapter is powered at 5 V from the USB bus (and can power - selecting it with the jumper you saw - target devices at either 3.3 Volts or 5Volts) BUT THIS IS POWER, NOT, NOT, NOT TTL levels!

The PL2303 chip USUALLY is used in adapters that will output 3.3V TTL Levels (good :)) but you CANNOT SAY FOR SURE.

Had you spent 5 (five minutes) searching on the board for PL2303 (AFTER having READ the READ-ME-FIRST) you would have found at least:
http://www.msfn.org/...455#entry965455

http://www.msfn.org/.../page__st__3040

So, yes, for all we know PL2303 based converters èrovide the "right" TTL level, but this has NOTHING to do with the way and POWER voltage level.

jaclaz

#4069
ljhall

ljhall
  • Member
  • 2 posts
  • Joined 25-January 12
  • OS:Windows 7 x64
  • Country: Country Flag
1000 Thanks to Gradius2. Your instructions were clear, concise, and just plain worked. Got the serial adaptor off of Ebay (from Bulgaria, of all places). After that, worked like a charm.
Let me know how I can send you something in thanks, I really appreciate it.

#4070
ljhall

ljhall
  • Member
  • 2 posts
  • Joined 25-January 12
  • OS:Windows 7 x64
  • Country: Country Flag
FYI, this adaptor off of Ebay was what I used. http://www.ebay.com/...=item415de51284
It worked perfectly, no soldering required, only needed a USB cable.
It is marketed to work for this specific problem, using the solution provided on these pages, and, it worked for me.
Upsides: No soldering required, includes pretty much everything you need...and works. Oh, and at $20 bucks shipped, its reasonable in price.
Downside: Ships from Bulgaria, so you'll be waiting a couple of weeks to use it.

#4071
rodyefew

rodyefew

    Newbie

  • Member
  • 11 posts
  • Joined 02-August 09
Hi All,

I have 2x Seagate Barracuda XT ST32000641AS drives. CC13 firmware.

One of them dropped out of BIOS, and I lost access to valuable data (no recent backup).

I cut a CA-42 cable and could access the terminal, however, the methods of disconnecting the motor or heads from the PCB didn't work. Whenever either was disconnected and power switched on to the Hard Drive, there would be no terminal access at all. Not sure if this is a symptom of voltage or whatnot. I didn't muck around with any batteries or test the voltage.

So I basically just worked with the terminal and issued the various commands.

Also, as described here: http://computerscien...ware-fault.html I had SMART failing when I type N1, so I had to issue the m0 command first. I had slightly different output to the page, but that was the first time I saw the "(P) SATA Reset" message.

So yay my data is back. I'm putting them in mirror mode now. Can't trust them any more.

I hope this helps someone.

Also, thought I'd add - these drives are just under 8m old. My PC has an oddity - when I touch the power switch, it switches on for a few seconds and then switches off - 3 times. After that sometimes it POSTs, and other times the fan goes crazy and it hangs. Even reset doesn't work. I then need to flip the power switch on the PSU, then switch it on again, then press the power button. Usually after this it works. So that's 4 power cycles to get the machine going. I haven't been able to figure this problem out yet, but I suspect it had at least contributed to the SMART problem. I usually leave my machine running to avoid the power cycling.

My mobo / CPU combo is probably shot. Checked thermals, PSU, power overloading, different RAM sticks, removal of all extra peripherals, CMOS reset, etc.

#4072
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,593 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

I cut a CA-42 cable and could access the terminal, however, the methods of disconnecting the motor or heads from the PCB didn't work. Whenever either was disconnected and power switched on to the Hard Drive, there would be no terminal access at all. Not sure if this is a symptom of voltage or whatnot. I didn't muck around with any batteries or test the voltage.

So I basically just worked with the terminal and issued the various commands.


I am not getting it. :ph34r:
This thread is about Seagate 7200.11.
The XT are not 7200.11 (or are they? :unsure: )

Basically on 7200.11's you can "work with terminal" in 4 (four) modes (all of them with the PCB powered through the SATA power connector):
  • PCB attached to the drive (BOTH Head and Motor contacts connected)
  • PCB NOT attached to the drive (NO contacts connected)
  • PCB attached to the drive BUT with Head contacts insulated (and with Motor contacts connected)
  • PCB attached to the drive BUT with Motor contacts insulated (and with Head contacts connected)

If you are suffering from LBA0 you use mode #1 above
If you are suffering from BSY you use mode #2 above (and you need to re-connect the board "live")
Modes #3 and #4 are workarounds or im'provements of mode #2 to reduce or eliminate the risk of re-connecting the whole PCB "live".

Your report is VERY interesting, BUT you should post (in a NEW thread) a complete description of:
  • the EXACT issue you had
  • the EXACT sequence of commands you used
  • WHICH EXACTLY of the above described modes you used
this way we would hopefully have a resource for the XT family of drives :yes: .

Without more data it simply means that this:
http://www.msfn.org/...-read-me-first/

Notwithstanding the above, this info may be useful to solve a number of similar problems on a whole range of similar hard disks, but in this case information here needs to be checked and verified if applies to your different HD.
In other words your mileage may (and WILL) vary.

is true, but without exact symptoms and exact (working :)) cure it would be of little help to other users.

From here your other problems sound a lot like either a defective PSU (more common) or a particular setup with different peripherals drawing power from a same line (more rare) or, as you think, a shot mobo/CPU, but this is really rare. :ph34r:

jaclaz

#4073
rodyefew

rodyefew

    Newbie

  • Member
  • 11 posts
  • Joined 02-August 09

This thread is about Seagate 7200.11.
The XT are not 7200.11 (or are they? :unsure: )


Ahh.. I suppose they're not. I assumed it was just a beefier version.

If you are suffering from


Hmm. To be honest, I don't know which problem I had, only that it failed to be detected in BIOS (and would hang it for a while) or Windows or any software. No funny clicks or whirrs.

Without more data it simply means that this: http://www.msfn.org/...-read-me-first/


Funnily enough, I "read" it, but didn't think too much and plunged into it.

I appreciate your reply and will try and piece together what I did in a new thread, as you mentioned. Perhaps when the second XT dies, I would have more solid information. Just hoping it doesn't come to that, or if it does, that it would be as painless as this time to fix it. (Although it took me a good month or two to get around to it).

Thank you jaclaz
rodyefew

#4074
Hicky

Hicky
  • Member
  • 4 posts
  • Joined 28-December 11
  • OS:none specified
  • Country: Country Flag
Hey..

Have been reading this thread all the way up to page 100, had to let it rest now and ask for help...
Not much about Barracuda ES2 drives here...
My issue....
I have this ST31000340NS ES2 drive who was working well until as a test I did a pcb board and rom chip swap and tested it on an ST3750330NS ES2 drive, both have identical board no, but different revision, but ought to be compatible as long as I do the rom chip swap...
After this test ST31000340NS drive spins up clicks 11 times spins down..My humble hope, maybe its been stuck in busy state, not ruined by this silly swap attempt..
It show up after a while when pc initialize, but not detected by BIOS, and off course neither by Windows, SeaTools etc..
ES2 disks has as you sure know terminal lock so I cant enter any commands after hitting CTRL+Z and getting F3 T> prompt without unlocking terminal...
I've been shorting read channels, lifting board from HDA contacts as soon as I get F3 T> promp for days and hours,.but F3 T> will stand forever when I do this, but as soon as I go on and hit the command 2 + enter this "FlashLED - Failure Code 000000CC Failure Adress 0025c8af" pops up over 2 lines in Hyperterminal, and repeats itself every 60 second or so..
I'm stuck, and hopefully someone can give some advice..

#4075
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,593 posts
  • Joined 23-July 04
  • OS:none specified
  • Country: Country Flag

Not much about Barracuda ES2 drives here...

Anything ES2 is NOT on the present thread, but here:
http://www.msfn.org/...000000cc-state/

jaclaz




12 user(s) are reading this topic

0 members, 12 guests, 0 anonymous users