TerryFox Posted April 9, 2009 Share Posted April 9, 2009 Hi ... I have a XP sp3 disc which I would like to install or embedded a driver . Its for the SATA Controller driver . I have the file which is in a zip format and when I unzip it become a setup.exe file . How do you install this or embed it unto my xp sp3 disk ? Thanks Link to comment Share on other sites More sharing options...
johnhc Posted April 10, 2009 Share Posted April 10, 2009 TerryFox, unzip it again. You must get down to the folder that contains the .inf and txtsetup.oem files. I use 7-Zip for this. Enjoy, John. Link to comment Share on other sites More sharing options...
iamtheky Posted April 10, 2009 Share Posted April 10, 2009 run the command: setup.exe /?figure out what the syntax is to admin install (or see if uniextract will unpack it )then just pull the driver. Link to comment Share on other sites More sharing options...
TerryFox Posted April 10, 2009 Author Share Posted April 10, 2009 (edited) Thanks for responding, very much appreciated . I have another question . Can I just use this instead unto a floppy http://downloadcenter.intel.com/filter_res...mp;submit=Go%21My system is 32 bit and I am thinking I can just use 32-bit Floppy Configuration Utility from the link above . Install it unto a floppy and use an external flop drive . I believe if it does load i have to select this >>> ICH8 HBM?AHCI SATA DRIVER Intrl ® 82801HEM?HBM SATA AHCI Controller . Am I on the right page ? Or am I way off base ? Thanks Edited April 10, 2009 by TerryFox Link to comment Share on other sites More sharing options...
johnhc Posted April 10, 2009 Share Posted April 10, 2009 TerryFox, you don't need any floppy utility because you are not making a floppy. Just DL the correct drivers for what you have and what your want to run. I don't have a clue what you should select. This is up to you to decide what you want to run. Enjoy, John. Link to comment Share on other sites More sharing options...
TerryFox Posted April 11, 2009 Author Share Posted April 11, 2009 Everything is good , I use nlite and embedded into my xp sp3 disk . I have it now install without any problems .Thanks Link to comment Share on other sites More sharing options...
johnhc Posted April 11, 2009 Share Posted April 11, 2009 TerryFox, great! Glad to help. Have fun, John. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now