[fuoriser]

Hi,

I'm a new user in the forum. I'm trying to repair my HD Seagate Barracuda 7200.11 ST3500620AS with BSY error.

HyperTerminal print me:

LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D

I have also tried after disconnection of the PCB (circuit board) from the hard drive case, but HyperTerminal print me the same line.

Can you help me?

Thanks!

Bye!

[jaclaz]

fuoriser, on Sep 6 2009, 04:26 PM, said:

Can you help me?

Yes.

Will it work?

See if this works:
http://www.msfn.org/board/unlocking-termin...te-t129551.html

Read CAREFULLY!
It is not clear WHICH are the terminals to be shorted.
Be very careful to NOT short anything else.
Read, re-read and re-re-read the info, make sure you find a "safe" way to attempt the shorting, do some tests with the hard disk NOT connected to power.
Your mileage may vary.

Doesn't the "normal" approach work?

Maybe the Italain translation of the original guide helps:
http://www.msfn.org/board/riparazione-seag...no-t129366.html

The currently easiest and all-in-one tutorial is here:
http://www.msfn.org/board/debricking-seaga...87.html&hl=

jaclaz

This post has been edited by jaclaz: 06 September 2009 - 08:49 AM

[fuoriser]

jaclaz, on Sep 6 2009, 04:47 PM, said:

fuoriser, on Sep 6 2009, 04:26 PM, said:

Can you help me?

Yes.

Will it work?

See if this works:
http://www.msfn.org/board/unlocking-termin...te-t129551.html

Read CAREFULLY!
It is not clear WHICH are the terminals to be shorted.
Be very careful to NOT short anything else.
Read, re-read and re-re-read the info, make sure you find a "safe" way to attempt the shorting, do some tests with the hard disk NOT connected to power.
Your mileage may vary.

Doesn't the "normal" approach work?

Maybe the Italain translation of the original guide helps:
http://www.msfn.org/board/riparazione-seag...no-t129366.html

The currently easiest and all-in-one tutorial is here:
http://www.msfn.org/board/debricking-seaga...87.html&hl=

jaclaz

Thanks for guide with unlock buy my HD is not ST******NS series but ST******AS and hence the procedure doesn't work.

I have just followed italian guide without result.

Thanks!

Bye!

[jaclaz]

fuoriser, on Sep 6 2009, 05:32 PM, said:

Thanks for guide with unlock buy my HD is not ST******NS series but ST******AS and hence the procedure doesn't work.

I have just followed italian guide without result.

Thanks!

Bye!

Well, that's strange.

The guide has proved to work in several hundreds of cases for "AS".

The other thread worked for the "NS", at least in a few cases.

Maybe you have a firmware "HP24"?
http://forum.hddguru.com/seagate-7200-firm...are-t11755.html

Did you "wait enough" after power on/before the Z?

Check this guide also:
http://sites.google....seagatefix/Home

jaclaz

This post has been edited by jaclaz: 06 September 2009 - 09:51 AM

[fuoriser]

jaclaz, on Sep 6 2009, 05:44 PM, said:

fuoriser, on Sep 6 2009, 05:32 PM, said:

Thanks for guide with unlock buy my HD is not ST******NS series but ST******AS and hence the procedure doesn't work.

I have just followed italian guide without result.

Thanks!

Bye!

Well, that's strange.

The guide has proved to work in several hundreds of cases for "AS".

The other thread worked for the "NS", at least in a few cases.

Maybe you have a firmware "HP24"?
http://forum.hddguru.com/seagate-7200-firm...are-t11755.html

Did you "wait enough" after power on/before the Z?

Check this guide also:
http://sites.google....seagatefix/Home

jaclaz

Hi jaclaz

thanks again. Because I am out for work I will try the 2nd link in 15 days.

Bye!

[fuoriser]

jaclaz, on Sep 6 2009, 05:44 PM, said:

fuoriser, on Sep 6 2009, 05:32 PM, said:

Thanks for guide with unlock buy my HD is not ST******NS series but ST******AS and hence the procedure doesn't work.

I have just followed italian guide without result.

Thanks!

Bye!

Well, that's strange.

The guide has proved to work in several hundreds of cases for "AS".

The other thread worked for the "NS", at least in a few cases.

Maybe you have a firmware "HP24"?
http://forum.hddguru.com/seagate-7200-firm...are-t11755.html

Did you "wait enough" after power on/before the Z?

Check this guide also:
http://sites.google....seagatefix/Home

jaclaz

Hi,

my firmware is HP24. In the procedure my hyper terminal print me always:

LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D
LED:000000CC FAddr:0024900D

Do you have any advice to recover my HD?

Thanks!

Bye!

[jaclaz]

fuoriser, on Sep 19 2009, 03:35 PM, said:

Do you have any advice to recover my HD?

Have you tried the method described by derp in the given thread?:

jaclaz, on Sep 6 2009, 05:44 PM, said:

Maybe you have a firmware "HP24"?

http://forum.hddguru.com/seagate-7200-firm...are-t11755.html

Did you "wait enough" after power on/before the Z?

I have nothing more than the above to "offer".

Try posting there.

jaclaz