[appyface]

BladedThesis, on 25 June 2010 - 07:55 PM, said:

There are 20 posts per page by default, so do some math.

I ask if someone knows where the links are, would they please post the specific reply numbers rather than a page number.

It is not necesary to post if they do not know the reply numbers. And it is not necessary to post if they do... that's up to them.

Kind regards,
--appyface

[jayank2000]

appyface, on 26 June 2010 - 07:44 AM, said:

BladedThesis, on 25 June 2010 - 07:55 PM, said:

There are 20 posts per page by default, so do some math.

I ask if someone knows where the links are, would they please post the specific reply numbers rather than a page number. It is not necesary to post if they do not know the reply numbers. And it is not necessary to post if they do... that's up to them.Kind regards,--appyface

&lt;br /&gt;&lt;br /&gt;I have used this. No changes have been made. Follow the guide. Best of luck.<br /><br />Edit: not able to attach files. Sorry. I downloaded from page 1 only. 64 bit elite guide.

Update: Giving me errors with ATI graphics card. So I tried not using the batch files and just tried using the vlite preset by Liquid, but no luck.
I gave up. Installed Win7 with full install. 640GB Hard Disk.

This post has been edited by jayank2000: 21 July 2010 - 07:41 PM

[jayank2000]

jayank2000, on 15 July 2010 - 07:55 PM, said:

appyface, on 26 June 2010 - 07:44 AM, said:

BladedThesis, on 25 June 2010 - 07:55 PM, said:

There are 20 posts per page by default, so do some math.

I ask if someone knows where the links are, would they please post the specific reply numbers rather than a page number. It is not necesary to post if they do not know the reply numbers. And it is not necessary to post if they do... that's up to them.Kind regards,--appyface

&lt;br /&gt;&lt;br /&gt;I have used this. No changes have been made. Follow the guide. Best of luck.<br /><br />Edit: not able to attach files. Sorry. I downloaded from page 1 only. 64 bit elite guide.

Update: Giving me errors with ATI graphics card. So I tried not using the batch files and just tried using the vlite preset by Liquid, but no luck.
I gave up. Installed Win7 with full install. 640GB Hard Disk.

[George King]

Links are dead...?

[shutfu]

7xtreme32.rar
7xtreme64.rar

7media32.rar
7media64.rar

7elite32.rar
7elite64.rar

7guide32.pdf
7guide64.pdf
7packages.pdf

[koala1202]

Thank you so much for the wonderful guide! I appreciate the great endeavor you put into it!

One suggestion: "Software Protection" service is supposed to be set to its default "Automatic (Delayed)". Otherwise, chances are you will see this message:

Quote

This copy of Windows 7 is not genuine.

on the lower right corner after running Windows for a while. This happens randomly, but it DOES happen on my machine. And that's because "Software Protection" service is not running, EVEN IF it's set to "Manual".

This post has been edited by koala1202: 10 August 2010 - 06:07 PM

[Grope For Luna]

Just for the record and in case it hasn't been mentioned, BLB client is a part of Windows backup, not business licensing. If you remove it, Windows Backup won't work.

SecureStartup-Package is the BitLocker utility.

ShareMedia-ControlPanel-Package is for media streaming options that you set in the Network and Sharing center.

This post has been edited by Grope For Luna: 12 August 2010 - 06:24 PM

[Fr33m4n]

A little help please. I was stuck with the error 5 access denied problem, but then I searched and found out that the issue is related to the tweak not getting loaded, so I tried to apply the tweak manually but I can't get it to work. Even the tweak says access denied. Does anyone have any suggestions. Screenshot of cmd output attached.

 access denied.jpg (63.83K)
Number of downloads: 87

[Limpster]

Hello there - Everything seems to be working fine on my both 7MEDIA 32 and 64 bit. But sumhow my dialup USB modem won't install (I use it rarely when I am away from home, travel etc). Any inputs resolving this issue will be greatly appreciated. Thank you.

[jayank2000]

jayank2000, on 21 July 2010 - 07:42 PM, said:

jayank2000, on 15 July 2010 - 07:55 PM, said:

appyface, on 26 June 2010 - 07:44 AM, said:

BladedThesis, on 25 June 2010 - 07:55 PM, said:

There are 20 posts per page by default, so do some math.

I ask if someone knows where the links are, would they please post the specific reply numbers rather than a page number. It is not necesary to post if they do not know the reply numbers. And it is not necessary to post if they do... that's up to them.Kind regards,--appyface

&lt;br /&gt;&lt;br /&gt;I have used this. No changes have been made. Follow the guide. Best of luck.<br /><br />Edit: not able to attach files. Sorry. I downloaded from page 1 only. 64 bit elite guide.

Update: Giving me errors with ATI graphics card. So I tried not using the batch files and just tried using the vlite preset by Liquid, but no luck.
I gave up. Installed Win7 with full install. 640GB Hard Disk.

Still not able to figure out my errors.
Using Win7 Home Premium 64 bit
ATI graphics 4770
Gigabyte 870 motherboard
Single HDD

Followed the guide and able to install, but ended up getting error while updating ATI 4770 drivers.
Any suggestions? I see in your "removal.bat" you have included ATI drivers for removal. What does it mean? Is it possible for me to delete few lines, so that when I run "cleanup" I get Operation Successful x 3.
I dont where I am making the error.

I want to retain ATI drivers and HP printer drivers listed in the removal.bat. Any suggestions.

Thanks in advance.

[SoWhy]

Hi there,

I installed the 7xtreme64 package successfully and I am happy with such a clean Windows 7. However, I encountered a small problem, that, if not solved, will make it useless for me: When I try to setup a PPPoE (= ADSL) connection, I end up with the message (see screenshot for original message):

Quote

Connection failed with error 1060

The specified service does not exist as an installed service.

Now since I know my modem works (I'm using it to write this post on XP), I guess something vital for PPPoE was removed with the lite pack. Does anyone know how to fix this?

TIA
SoWhy

Attached File(s)

•  Windows 7 x64-2010-09-01-14-24-34.png (215.67K)
  Number of downloads: 68

This post has been edited by SoWhy: 01 September 2010 - 06:26 AM

[Derb]

Hi there,

first of all, sorry for my bad english

I am using 7media64 on a Windows 7 Home Premium Edition.
Im want to use the OS on a CAR PC and everything works fine, except one thing:

I am using Microsoft Research Virtual Wifi in order to use my Netgear WLAN stick as a WLAN Access Point.

Everything works fine under the full Windows 7 installation, but in the cleaned version my WLAN clients are not able to automatically retrieve an IP Adress.

Any suggestions on what Packages to keep in the Image?

Regards

[jayank2000]

Willov, on 24 March 2010 - 11:43 AM, said:

POMAH-PRESS, on 24 March 2010 - 10:13 AM, said:

Probably removed smth you shouldn't have. Also check with the real machine once in a while.

SMTH = system restore?

Edit: Got it to work now, thanks for the help Pomah, you´r the man =D

BTW think it was the game pack that broke the install.

What did you do? removed the game pack or included. how did u edited the files. any help.
Thanks,

[polishzx]

Hello,

Is there a simple way to enable network printer support when using 7elite32? I am unable to add a network printer on the two machines I have running 7elite32, which is very very bad.

[Coody]

hi to all, i have only this question:

how can i make lite version of Windows 7 Service Pack 1 MSDN ??

i know, here is a topic about WIN 7 RTM without SP, but liquid0624 can you please make revision or is here a way to make a good revision to WIN 7 SP1 ??

it would be great !



** and sorry for my english **

[vincentvega007]

Hi,

I putting in word for update Windows 7 RTM manual for new Win 7 with SP1.

Thanks

[marcel1982]

I would appreciate it, if this works on Windows 7 Sp1

[marcel1982]

I made this on my Windows 7 X64 Maschine and it works with Service Pack 1.

I have made a Windows 7 virtual machine and followed the Instructions in the pdf. But I changed the "removal.bat". The head of the file looks now:

@echo off

REM Code Base
set code=amd64

REM Build Number
set build=7601

REM Minor Build
set minor=17514

I changed the "set build" to 7601 and the "set minor" to 17514. I also deleted the follow lines:

%rempacks%Microsoft-Windows-LocalPack-AU-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-CA-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-GB-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-ZA-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-US-Package%winsuffix%

I tested it yeasterday Evening and it works now with Sp1. Here the things that I have done:

- Installed Windows 7 x64 (Sp1 included) in Vmware 7.
- Changed the "removal.bat" in the "7media64" package like above.
- Installed WAIK for Windows 7, not the Vista Waik.
- Followed the Instruction in the pdf from experience.

I didn't get any error.

[T1000]

Hi there...
I've successfully performed dism removal without error message on Ultimate 7601.17514 x86
As follows...
Prepare the install.wim following this http://www.msfn.org/...-batch-removal/

Then, after removing WAIK2 or, as I did, WAIK3 for W7 and installed WAIK1.1, copy imagex from WAIK1.1 in wtools dir.
Vlite must be installed after AIK1.1 cause it takes a copy of his library on vlite directory.
If you install vlite after AIK 3, wimgapi.dll must be taken from AIK1.1 directory and replaced in vlite dir.

Run gimagex, mount install.wim to any directory with read/write, then commit and unmount.

Run mount.bat

Spoiler

D:\7media32\batch>mount

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.


Mounting (RW): [d:\7media32\source\sources\install.wim, 1] ->
[d:\7media32\mount]

Successfully mounted image (RW).

Perform intall_wim_tweak manually if mount.bat doesnt
Like :

Spoiler

D:\7media32\wtools\install_wim_tweak.exe /p D:\7media32\mount /m
-------------------------------------------
------Pre-install registry Tweak Tool------
---------------for Windows 6.x-------------
-------------------------------------------
Processing : D:\7media32\mount
Creating BKP of registry file... OK
Mounting registry file... OK
Enabilng taking ownership... OK
Editing 'Packages' subkeys 681/681 OK
Editing 'PackagesPending' subkeys 681/681OK
Modyfing registry completed sucessfully.
-------------------Ending------------------
Unmounting key... OK
Removing BKP file... OK

Modify removal.bat as marcel1982 said:

REM Build Number
set build=7601

REM Minor Build
set minor=17514

also remove these lines 'cause those packages are missing

%rempacks%Microsoft-Windows-LocalPack-AU-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-CA-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-GB-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-ZA-Package%winsuffix%
%rempacks%Microsoft-Windows-LocalPack-US-Package%winsuffix%

Run removal.bat and so on

After a couple of error message i've decide to split removal.bat into 2 phase.
Removal1.bat with alf list of packages and removal2.bat with the rest.
Each phase was commited at the end.

A partial report

Spoiler

D:\7media32\batch>removal1

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514
Processing 1 of 1 - Removing package Microsoft-Hyper-V-Common-Drivers-Package~31
bf3856ad364e35~x86~~6.1.7601.17514[==========================100.0%==========================]
The operation completed successfully.

......

Processing 1 of 1 - Removing package Microsoft-Windows-RecDisc-SDP-Package~31bf3
856ad364e35~x86~~6.1.7601.17514
[==========================100.0%==========================]
The operation completed successfully.

D:\7media32\batch>commit
ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.

Unmounting: [d:\7media32\mount]...
Successfully unmounted image.

D:\7media32\wtools\install_wim_tweak.exe /p D:\7media32\mount /m -------------------------------------------
------Pre-install registry Tweak Tool------
---------------for Windows 6.x-------------
-------------------------------------------
Processing : D:\7media32\mount
Creating BKP of registry file... OK
Mounting registry file... OK
Enabilng taking ownership... OK
Editing 'Packages' subkeys 681/681 OK
Editing 'PackagesPending' subkeys 681/681OK
Modyfing registry completed sucessfully.
-------------------Ending------------------
Unmounting key... OK
Removing BKP file... OK

D:\7media32\batch>mount

ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.

Mounting (RW): [d:\7media32\source\sources\install.wim, 1] ->
[d:\7media32\mount]
Successfully mounted image (RW).

D:\7media32\batch>removal2

Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7601.17514

Processing 1 of 1 - Removing package Microsoft-Windows-Shell-MultiplayerInboxGam
es-Package~31bf3856ad364e35~x86~~6.1.7601.17514
[==========================100.0%==========================]
The operation completed successfully.

....


D:\7media32\batch>commit
ImageX Tool for Windows
Copyright © Microsoft Corp. All rights reserved.

Unmounting: [d:\7media32\mount]...
Successfully unmounted image.

The next step is find out why i get "error loading boot.wim aborting" in vlite
Maybe removing packages using vlite before dism will work.
==========================
Environment used:
ULTIMATE 7600.16385 x86



Thanks to liquid0624 & dead0

This post has been edited by T1000: 25 June 2011 - 03:41 PM

[Squeeto]

First, Wow, thank you Liquid0624 and Liquidzgurl.

I hope that this hasn't already been asked; there is a lot of reading here.
If I want to use 7xtreme32 but include "Windows Sidebar & Gadgets", should I remove-
%rempacks%Microsoft-Windows-Gadget-Platform-Package%winsuffix%
from removal.bat?

I know how to do the vLite part.