[mrookie]

@blue4603

Here is my log as requested.

Attached File(s)

•  log.zip (2.57K)
  Number of downloads: 5

[blue4603]

@grabben

Quote

Would it be possible for you to have 7C search for packages and list them & also being able to remove them?
To remove language packs, drivers and updates and then components:)

I am afraid I did not understand your question, could you be more clear?

@Schemek

Quote

Do you need any help with adding new components to your program? I mean by simply creating new ones (sorry if example below breaks software copyright) and sending to you to approve:
I would be really happy to help, because I have good feelings about this application:)

What you did is a very great job and that what I am aiming for, to let people help me in building the XMLs for every component. I will post a guide for the components XML in this weekend that will explain how to create a component XML. It is on the to do list on the first post. Also, as I always say, keep an eye on the to do list on the first post to know what I am up to.

I appreciate your help.

@mrookie

Thank you. I appreciate your help.

Regards

[mrookie]

@blue4603

No problems

[grabben]

blue4603, on 20 March 2011 - 10:31 PM, said:

@grabben

Quote

Would it be possible for you to have 7C search for packages and list them & also being able to remove them?
To remove language packs, drivers and updates and then components:)

I am afraid I did not understand your question, could you be more clear?

Regards

Absolutely:)

I was whondering if 7C (in the future) could scan for packages, language packs and drivers so they can be removed. I know you can remove drivers/updates if they are in the list to be integrated.
And also, I noticed there's xml files for each component to be removed. Is it done by you manually or by 7C? Im sure you can have the components tab search for everything that can be removed and list them nicely:)

This post has been edited by grabben: 21 March 2011 - 04:30 AM

[blue4603]

@grabben

Quote

I was whondering if 7C (in the future) could scan for packages, language packs and drivers so they can be removed. I know you can remove drivers/updates if they are in the list to be integrated.And also, I noticed there's xml files for each component to be removed. Is it done by you manually or by 7C? Im sure you can have the components tab search for everything that can be removed and list them nicely:)

Hmmm. I still did not fully understand. I recommend you wait for the components XML explanation and maybe you will find your answer. Also, 7Customizer reads the all XMLs in the components folder and dynamically build the tree you see in the components tab (The explanation of components XML will fully clear this).

So, everyone, do not rush. Be patient and wait till the weekend and I will prepare the explanation and then you could ask your questions .

BTW , grabben , did 7customizer worked with you? or still there is a problem?

Regards

[grabben]

blue4603, on 21 March 2011 - 04:46 AM, said:

@grabben

Quote

I was whondering if 7C (in the future) could scan for packages, language packs and drivers so they can be removed. I know you can remove drivers/updates if they are in the list to be integrated.And also, I noticed there's xml files for each component to be removed. Is it done by you manually or by 7C? Im sure you can have the components tab search for everything that can be removed and list them nicely:)

Hmmm. I still did not fully understand. I recommend you wait for the components XML explanation and maybe you will find your answer. Also, 7Customizer reads the all XMLs in the components folder and dynamically build the tree you see in the components tab (The explanation of components XML will fully clear this).

So, everyone, do not rush. Be patient and wait till the weekend and I will prepare the explanation and then you could ask your questions .

BTW , grabben , did 7customizer worked with you? or still there is a problem?

Regards

Ill hold on until then

Uhm I got it working I tink. SP1 was the issue i think. Like i said, i unpacked it to a new folder and it worked fine. It wasnt a language issue. The tool works just fine removing components etc.

[b115242]

Hi
Tried out the new 7C version 0.5 beta, and used the a "Windows 7 x64 Enterprise SP1" as the source.
I didn't include anything (drivers or hotfixes), but made some random adjustments (unattended.
This gave me a dialogbox with the following text:
"Windows could not complete the installation, To install Windows on this computer, restart the installation."
The "computer" was a VMWare workstation 7.1.3.
If I tried the same source with no manipulation all functioned well.
No error was reported though the 7customizer processing
I have included the log files I found on the 7Customizer folders.

Regards
B115242

Attached File(s)

•  log.zip (27.31K)
  Number of downloads: 4

[coucou]

Hi blue,

Right now I tested the new version 0.5 with a Windows 7 SP1.
I integrated 2 extra languages, 11 updates and 488 drivers. (No tweaks, No remove components, No Unattended).
It looks working fine at the start; LangPacks and Updates integrated, start inegrating the drivers ... in a final I got Error 2. When I opened the log files, ther's no error into
Here my log file

Regards
 log.zip (4.36K)
Number of downloads: 6

This post has been edited by coucou: 22 March 2011 - 10:42 AM

[myselfidem]

@coucou
I think it's better do not integrate the update Windows6.0-KB947821-v12-x86.msu.
This update will be given with Windows Update, if there is a problem with Windows Servicing.
Personnaly, I don't integrate this update and Windows Update don't give this update with my Windows 7 SP1!

[coucou]

myselfidem, on 22 March 2011 - 01:23 PM, said:

@coucou
I think it's better do not integrate the update Windows6.0-KB947821-v12-x86.msu.
This update will be given with Windows Update, if there is a problem with Windows Servicing.
Personnaly, I don't integrate this update and Windows Update don't give this update with my Windows 7 SP1!

I did NOT integrate Windows6.0-KB947821-v12-x86.msu. On the other hand I did integrate Windows6.1-KB947821-v10-x86.msu
Wait and see

This post has been edited by coucou: 23 March 2011 - 03:46 AM

[myselfidem]

coucou, on 23 March 2011 - 03:36 AM, said:

myselfidem, on 22 March 2011 - 01:23 PM, said:

@coucou
I think it's better do not integrate the update Windows6.0-KB947821-v12-x86.msu.
This update will be given with Windows Update, if there is a problem with Windows Servicing.
Personnaly, I don't integrate this update and Windows Update don't give this update with my Windows 7 SP1!

I did NOT integrate Windows6.0-KB947821-v12-x86.msu. On the other hand I did integrate Windows6.1-KB947821-v10-x86.msu
Wait and see

I saw this (inside your log file), but it's the same KB updated!

This post has been edited by myselfidem: 23 March 2011 - 04:46 AM

[coucou]

HI,

Right now I finish WIn7 SP1 installation prepared with 7Customizer0.5 (integrated 2 extra languages, 11 updates and 488 drivers. No tweaks, No remove components, No Unattended).
Everything looks working just fine

I checked:
The added language (Control Panel / Regional settings) OK
The installed updates, they are the here above 11 + IE9 all of them are in C:\Windows\servicing\Packages\ folder
The available drivers: they are 1012 elements in C:\Windows\System32\DriverStore\FileRepository\ folder

@myselfidem: at first sight no probelem with Windows6.1-KB947821-v10-x86.msu.
Although I'll remove this update in my next DVD, I'm curious to know what problem you had

Regards

This post has been edited by coucou: 24 March 2011 - 05:56 AM

[myselfidem]

coucou, on 24 March 2011 - 05:55 AM, said:

@myselfidem: at first sight no probelem with Windows6.1-KB947821-v10-x86.msu.
Although I'll remove this update in my next DVD, I'm curious to know what problem you had

Regards

I've installed SP1 with "sysprep" and I've no problem. It was just my advice about integration KB947821.
This upadte isn't given for me with Windows Update after my silent installation and all is fine.
But using 7Customizer 0.4.4 or 7Customizer 0.5.0 with my new Windows 7 SP1, I have an error and blue4603 is working to find the "bug"!
If I select another install.wim file and select a new time the install.wim I want customize 7Customizer works fine! Weird.
Cheers and thanks.

[coucou]

myselfidem, on 24 March 2011 - 06:08 AM, said:

I've installed SP1 with "sysprep" and I've no problem. It was just my advice about integration KB947821.
This upadte isn't given for me with Windows Update after my silent installation and all is fine.
But using 7Customizer 0.4.4 or 7Customizer 0.5.0 with my new Windows 7 SP1, I have an error and blue4603 is working to find the "bug"!
If I select another install.wim file and select a new time the install.wim I want customize 7Customizer works fine! Weird.
Cheers and thanks.

Just an advice,
In the past, I've got blue screen errors as welle as other weird errors during (frequently at the end of) win7 install.
I noticed that "working" disk as well as "save to" disks were defragmented. Then, before making the Win7.ISO file, I cleanup and defragment the "working" and "save to" disks (using diskeeper). Since that, the install is more smoothly and NO more errors (cross fingers)

[myselfidem]

Thanks coucou!
I always do like this!
When BSOD (Blue Screen Of the Death) happens to me sometimes is due to ATI Graphic drivers not working well on the virtual machine.
But my Windows 7 SP1 + IE9 customized with all my programs installed with WPI 8.1.0 works really fine.
The only trouble I'm looking for now is the pop up window asking to reboot the computer to have all the fonctionnality. I can wait with this pop up!
I think it is because IE9 is integrated!

[coucou]

myselfidem, on 24 March 2011 - 10:35 AM, said:

The only trouble I'm looking for now is the pop up window asking to reboot the computer to have all the fonctionnality. I can wait with this pop up!
I think it is because IE9 is integrated!

When that reboot pop up window came? What prog activate that reboot? How far I know WPI release a reboot at the end of progs install, you may configure it.
Be care if you're installing VSO progs and other like that. VSO will install Patin-Coufin driver; although you configure it to NOT reboot it rteboot anyway.
Regarding IE9, as far as I'm concerned, I've IE9 integrated and get no rebbot.

[myselfidem]

OK! Thanks coucou for your help.
After many tests I see that KB976902 is include with SP1.
The window pop up is about Activation Windows 7 SP1, when I use the batch file to replace "Tokens.dat" activated for Windows 7 SP0!
After the reboot Windows 7 SP1 is activated, but this wasn't happend with Windows 7 SP0! Weird!
Maybe is using Virtual Machine?
In fact, there is no problem with IE9 integrated!!
However all works fine!

This post has been edited by myselfidem: 24 March 2011 - 12:45 PM

[coucou]

Hi myselfitem,

I've no problem with pop reboot in my Windows SP1 because I'm not replacing "Tokens.dat". I prefer doing it later and manually.
I've KB976902 included in my SP1 too.
Be care with KB971033 is the Activation Genuine in SP0. I don't know if any KB replaced this one.

glance at IE9 languages adding

BTW, I'm looking on how to add a link of Gspot.exe (is a free utility which identifies the codec) to my Control Panel.
I'll appreciate any help

[myselfidem]

I think the problem with "tokens.dat" is solved, because the file isn't the same for Windows 7 SP0 and SP1.
I'm testing now with the new "tokens.dat" for SP1 and I tell you later!

[myselfidem]

@coucou
SOLVED!
Windows 7 SP1 activated successfuly. The file "tokens.dat" isn't the same for Windows 7 SP1. Replaced with the new one and ALL IS FINE!
Whithout KB971033 integrated!
No more window pop up about "Windows 7 SP1 Activation"!!

About the link for "Gspot.exe" inside "Control Panel".

Look for the HKEY_CLASSES_ROOT\CLSID inside the Registry for Gspot.exe, and make a reg file (example):

Link for Registry inside Control Panel:

 
Windows Registry Editor Version 5.00

; Ajouter le module "Editeur du registre" au Panneau de configuration

[HKEY_CLASSES_ROOT\CLSID\{77708248-f839-436b-8919-527c410f48b9}]
@="Editeur du registre"
"InfoTip"="Démarre l'Editeur du registre"
"System.ControlPanel.Category"="5"

[HKEY_CLASSES_ROOT\CLSID\{77708248-f839-436b-8919-527c410f48b9}\DefaultIcon]
@="%SystemRoot%\\regedit.exe"

[HKEY_CLASSES_ROOT\CLSID\{77708248-f839-436b-8919-527c410f48b9}\Shell]

[HKEY_CLASSES_ROOT\CLSID\{77708248-f839-436b-8919-527c410f48b9}\Shell\Open]

[HKEY_CLASSES_ROOT\CLSID\{77708248-f839-436b-8919-527c410f48b9}\Shell\Open\Command]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
  00,5c,00,72,00,65,00,67,00,65,00,64,00,69,00,74,00,2e,00,65,00,78,00,65,00,\
  00,00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\ControlPanel\NameSpace\{77708248-f839-436b-8919-527c410f48b9}]
@="Ajoute Editeur du registre au Panneau de configuration"

Cheers

*Edit: You can use this CLSID: CLSID\{D14ED2E1-C75B-443c-BD7C-FC03B2F08C20}

This post has been edited by myselfidem: 25 March 2011 - 09:14 AM