[blue4603]

Quote

You look serious with this program!
Btw I assume the list of removable components and configurable stuff is complete already? There is a thread floating around where people disassembled the image into bits biggrin.gif

Actually now I did not.

Could you provide me with the link for the thread?

Regards

[TheWalrus]

I think it was this http://www.msfn.org/board/windows-7-x64-vl...al-t136837.html
but there are few others in vLite section. There is loads of posts to browse through, but the info is quite valuable I think.
I guess the way your tool works is to mount the image and then remove individual components based on their id and name, or something in that way?

[blue4603]

Quote

I think it was this http://www.msfn.org/...al-t136837.html
but there are few others in vLite section. There is loads of posts to browse through, but the info is quite valuable I think.
I guess the way your tool works is to mount the image and then remove individual components based on their id and name, or something in that way?

Thanks for the link

I did not get to removing components part yet but I think that I need to mount the image first remove components related files and registry entries and commit the changes.

Regards

[TheWalrus]

I guess you can read through the vLite and Unattended W7 forums to gain more knowledge. There are probably more ways to do this, but I am the last one to tell

[blue4603]

Quote

I guess you can read through the vLite and Unattended W7 forums to gain more knowledge. There are probably more ways to do this, but I am the last one to tell smile.gif

OK. Thanks for the info.

Regards

[wazer]

Im getting this error when im trying to add my extracted iso files to image path.


im running win7 x64 DANISH, and tryed to add w7 x64 danish files to image path.

Mayb some of it is writting in danish

I see theres other people that have the same issue in x86 aswell.

Se slutningen af denne meddelelse, hvis du vil have detaljer om,
hvordan du starter JIT-fejlfinding i stedet for denne dialogboks.

************** Undtagelsestekst **************
System.NullReferenceException: Objektreferencen er ikke indstillet til en forekomst af et objekt.
   ved _7Customizer.Form1.selectImagePathBtn_Click(Object sender, EventArgs e)
   ved System.Windows.Forms.Control.OnClick(EventArgs e)
   ved System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   ved System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   ved System.Windows.Forms.Control.WndProc(Message& m)
   ved System.Windows.Forms.ButtonBase.WndProc(Message& m)
   ved System.Windows.Forms.Button.WndProc(Message& m)
   ved System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   ved System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Indlæste assemblies **************
mscorlib
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
7Customizer
	Assemblyversion: 1.0.0.0
	Win32-version: 1.0.0.0
	CodeBase: file:///C:/Users/Administrator/Desktop/Ny%20mappe/7Customizer.exe
----------------------------------------
System.Windows.Forms
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Xml
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
mscorlib.resources
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
System.Windows.Forms.resources
	Assemblyversion: 2.0.0.0
	Win32-version: 2.0.50727.4927 (NetFXspW7.050727-4900)
	CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_da_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------

************** JIT-fejlfinding **************
Hvis du vil aktivere JIT-fejlfinding, skal værdien jitDebugging indstilles
i afsnittet system.windows.forms i konfigurationsfilen
for programmet eller computeren.
Programmet skal desuden kompileres med fejlfinding
aktiveret.

Eksempel:

<configuration>
	<system.windows.forms jitDebugging="true" />
</configuration>

Når JIT-fejlfinding er aktiveret, bliver alle ikke-afviklede
undtagelser sendt til den JIT-fejlfindingsfunktion, der er registreret på computeren, i stedet for
at blive afviklet af denne dialogboks.

This post has been edited by wazer: 29 October 2009 - 09:14 AM

[blue4603]

@wazer

Could you post your folder structure?

like this
boot
efi
Sources .. etc

and could you post the name of the files in the sources folder that has extension .wim

Regards

[SheepyDaz]

I think this is the same error as what i had.
change the folder name where your extracted iso is to "win", then run 7customizer as admin.

[wazer]

blue4603, on Oct 29 2009, 04:19 PM, said:

@wazer

Could you post your folder structure?

like this
boot
efi
Sources .. etc

and could you post the name of the files in the sources folder that has extension .wim

Regards

F:\
\\Installation
\\\Microsoft
\\\\ISO
\\\\\Microsoft.Windows.7.DK
\\\\\\da_windows_7_ultimate_x64_dvd_x15-65918

inside ^ its like this

boot
efi
sources
sources
upgrade
autorun.inf
bootmgr
bootmgr.efi
setup.exe

In the sources folder i only got
boot.wim
install.wim



This is a untouched iso directly from technet


*update*

I tryed what SheepyDaz wrote but its still the same i Ran it as administrator and renamed the iso folder to win. Still no luck

This post has been edited by wazer: 29 October 2009 - 12:29 PM

[blue4603]

@wazer

Did you choose Imagex and DISM that are located inside amd64 folder.
eg I installed aik to the default directory
C:\Program Files\Windows AIK\
in this directory there is a folder called tools
in these folder there are some folders
If you are using an x64 version of windows use amd64 folder
If you are using an x86 version of windows use x86 folder
If you are using an Itanium version of windows use ia64 folder

Regards

[wazer]

blue4603, on Oct 29 2009, 07:51 PM, said:

@wazer

Did you choose Imagex and DISM that are located inside amd64 folder.
eg I installed aik to the default directory
C:\Program Files\Windows AIK\
in this directory there is a folder called tools
in these folder there are some folders
If you are using an x64 version of windows use amd64 folder
If you are using an x86 version of windows use x86 folder
If you are using an Itanium version of windows use ia64 folder

Regards

i got dism and imagex in the 7customizer folder and im using 64bit imagex as my os is 64.

Yes dism and imagex are selected correctly in your program :=)

This post has been edited by wazer: 29 October 2009 - 02:56 PM

[blue4603]

Quote

i got dism and imagex in the 7customizer folder and im using 64bit imagex as my os is 64.

Yes dism and imagex are selected correctly in your program :=)

I think you did not get my point.

You need to select imagex and dism that are inside the amd64 folder inside the WAIK installation folder

Regards

[wazer]

blue4603, on Oct 29 2009, 10:02 PM, said:

Quote

i got dism and imagex in the 7customizer folder and im using 64bit imagex as my os is 64.

Yes dism and imagex are selected correctly in your program :=)

I think you did not get my point.

You need to select imagex and dism that are inside the amd64 folder inside the WAIK installation folder

Regards

Yep that worked thanks i downloaded a fresh waik and installed that now it seems to work.

Tho i need to select every single update when i try to add them im sure you already have heard that from someone else its looking really bright for the win7 custom now thanks to you :=)

Does the updates *msu just beeing added as msu and installing at first login? Would be cool if it replaces the old ones with the files from the updates ;=)

[blue4603]

Quote

Yep that worked thanks smile.gif i downloaded a fresh waik and installed that now it seems to work.

Glad it worked for you

Quote

Tho i need to select every single update when i try to add them tongue.gif im sure you already have heard that from someone else its looking really bright for the win7 custom now tongue.gif thanks to you :=)

Later on I will change inserting updates to selecting multiple updates at once

Quote

Does the updates *msu just beeing added as msu and installing at first login? Would be cool if it replaces the old ones with the files from the updates ;=)

I think DISM replaces the old files with new one.

Regards

[SheepyDaz]

Looking forward to testing this new version out.

Another suggestion -
Perhaps add an option to create an iso once people have finished editing there images

**EDIT**
When using the unattended tab, i dont want to add a username as i will be using this image on multiple pc.
Do i have to fill it in??

This post has been edited by SheepyDaz: 29 October 2009 - 07:12 PM

[Rudi1]

Hey,this is a great news that someone is starting a replacement for vlite!
I am not try it yet,becouse I will wait for removing components option.

[blue4603]

Quote

Looking forward to testing this new version out.

Another suggestion -
Perhaps add an option to create an iso once people have finished editing there images newwink.gif

Yes this also will come later. You could use vlite to create the iso for you. Thanks for the suggestion.

Quote

**EDIT**
When using the unattended tab, i dont want to add a username as i will be using this image on multiple pc.
Do i have to fill it in??

Just choose skip user and leave the admin password blank.

@Rudi1 Removing components will come late because it will need lots of discussion and researching.

Regards

[TripNRaVeR]

this new version (0.1.4) works like charm

i keep testing this tool, thnx for creating this thing, i'll keep you informed

[blue4603]

Quote

this new version (0.1.4) works like charm thumbup.gif

i keep testing this tool, thnx for creating this thing, i'll keep you informed

Glad it worked for you. please note that there is a slight problem with the unateended part .It still does not auto logon to the administrator account
So I recommend you DO NOT skip user creation until I resolve this issue.

Regards

[SheepyDaz]

Quote

Glad it worked for you. please note that there is a slight problem with the unateended part .It still does not auto logon to the administrator account
So I recommend you DO NOT skip user creation until I resolve this issue.

Regards

I didnt get this error at all Blue.
When i used the "Skip creating user"
Just before windows logged in for the first time, it asked to create a user. I done that an it logs in fine.
Tested on 7 pro x86.

Any chance you can get 7customizer to remember the imagex an dism locations?
It becomes a pain adding the files each time.
Also add so when you start the program it triggers off uac?