Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically. 



gosh

New support for wifi

Recommended Posts

gosh    1

ince the dawn of time, Windows PE (WinPE) has not had any support for the 802.1x authentication protocol. This meant that any network deployment of Windows via a network secured with 802.1x was a non-starter, causing headaches for a few on my customers; I actually had one customer that ran new network cables to a majority of the desks in order to be able to deploy Windows XP over the network.

However, thanks in part to a colleague of mine who worked on this, Microsoft has released hotfixes that now add 802.1x support to both WinPE 2.1 and WinPE 3.0. You can get the hotfixes and further information at the below links:

WinPE 2.1: http://support.microsoft.com/kb/975483

WinPE 3.0: http://support.microsoft.com/kb/972831

Share this post


Link to post
Share on other sites

cluberti    5

You use dism to add the .cab file that exists when you extract the package to a WinPE 2.1 or 3.0 .wim file to "install" the hotfix. It doesn't actually install on a full OS.

Share this post


Link to post
Share on other sites
cluberti    5
Netsh is the only interface WinPE would have, and I don't know how much of netsh wlan is even in WinPE after this hotfix. Someone would have to test, or write a GUI utility if they wanted a GUI.

Share this post


Link to post
Share on other sites
wimb    3

I tried to use dism to "install" the HotFix KB972831 in Windows PE 3.0 boot.wim file mounted with imagex in folder mount,

but it fails giving me

Error: 0x800f081e

The specified package is not applicable to this image.

Used in XP OS at Deployment Tools Command Prompt:

Dism /image:F:\winpe3_x86\mount /Add-Package /PackagePath:F:\winpe3_x86\fix283119\Windows6.1-KB972831-x86.cab

Can someone help me to solve the problem ?

Share this post


Link to post
Share on other sites
andyasselin    0
ince the dawn of time, Windows PE (WinPE) has not had any support for the 802.1x authentication protocol. This meant that any network deployment of Windows via a network secured with 802.1x was a non-starter, causing headaches for a few on my customers; I actually had one customer that ran new network cables to a majority of the desks in order to be able to deploy Windows XP over the network.

However, thanks in part to a colleague of mine who worked on this, Microsoft has released hotfixes that now add 802.1x support to both WinPE 2.1 and WinPE 3.0. You can get the hotfixes and further information at the below links:

WinPE 2.1: http://support.microsoft.com/kb/975483

WinPE 3.0: http://support.microsoft.com/kb/972831

You do know they Talk about wired port based auth and not wireless

http://en.wikipedia.org/wiki/IEEE_802.1X

Share this post


Link to post
Share on other sites
jaclaz    941
You do know they Talk about wired port based auth and not wireless

Then, being the title of this thread "New support for wifi", and seeing what Eagle710 posted, does it means that BOTH gosh and Eagle710 are lieing? :ph34r::w00t:

@Eagle710

Care to post some details on the topic and your success? :unsure:

jaclaz

Share this post


Link to post
Share on other sites
Eagle710    0
You do know they Talk about wired port based auth and not wireless

Then, being the title of this thread "New support for wifi", and seeing what Eagle710 posted, does it means that BOTH gosh and Eagle710 are lieing? :ph34r::w00t:

@Eagle710

Care to post some details on the topic and your success? :unsure:

jaclaz

So this is not wireless functionality? Are you sure it seems like they are talking about wireless.

I will but let me put my information together.

Share this post


Link to post
Share on other sites
gosh    1
You do know they Talk about wired port based auth and not wireless

Then, being the title of this thread "New support for wifi", and seeing what Eagle710 posted, does it means that BOTH gosh and Eagle710 are lieing? :ph34r::w00t:

@Eagle710

Care to post some details on the topic and your success? :unsure:

jaclaz

jaclaz i just copied my post from a Microsoft blog. All content was directly from microsoft. So its not a question of not telling the truth, if Microsoft says it works it works.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

×