Drivers Installer Assistant v.6.4.28 PreFinal

51 posts in this topic

To be honest, the screenshot to me nothing says. Since most errors I can not see ...

But I know that many users Win7 there was an error ActiveX component can't create object.

There are several ways to solve this problem

1. Download and install from Microsoft's library capicom

just in case, say the distribution installs the library in the folder c:\Program Files\Microsoft CAPICOM\Lib\X86

2. a. Download the archive capicom.7z of attachment, unzip it and file capicom.dll placed in the directory %windir%\system32

b. Following is a need to register the file - select Start-Run regsvr32 capicom.dll

3. Change option in section [Main]

CalculateHashMode = 0 - this is an old method for hash file, without using the library capicom

The first and the second method is preferable, as in the third slows the rate of creating backups



Share this post

Link to post
Share on other sites

At this time in the DIA did not change as much as usual, but there are a couple of very useful. The program is now better quality picks up the driver - if there are multiple drivers for one device, then the installation will be offered to drivers approaching on the most complete code of the device.

Also, for more convenient custom installation, the program added a filter that removes from the list of currently installed drivers.

For a more comfortable work and I also realized the possibility of extracting the drivers to your chosen directory.

Changes to the Drivers Installer Assistant [3.4.12 - RC1]

[ADDED] For a custom installation added a selection of drivers in groups, "Not Installed or Disable", "Update Available", "Installed", "Older than the established."

[ADDED] Added ability to extract the driver (selected or all that apply). Available for group treatment.

[ADDED] More accurate selection of drivers. To install the driver will be offered that are matched to the fullest HWID.

[ADDED] For additional utilities added to the setup executable file for 64-bit OS. If the setting is not specified, the default is to run a file, prescribed for 32-bit OS.

[FIXED] Fixed appearance of messages at work in quiet mode.

[FIXED] There was no transfer of some elements. Fixed.

[CHANGED] Updated program DevManView to version V1.22 (Added run 64-bit version).

[CHANGED] Updated Program System Information Viewer to version V4.17 (Added run 64-bit version).

[CHANGED] Changed the checkbox element in all forms.

[CHANGED] Fixed the displacement of some elements in the form on different operating systems.

[CHANGED] Many other small fixes.


Share this post

Link to post
Share on other sites

Changes to the Drivers Installer Assistant [5.4.15 - Final]

! This is a summary list of the changes since the last public version 3.12.12

! Attention, renamed configuration file - now DriversInstaller.ini, instead settings.ini

GUI Changes

[CHANGED] Large restyling program appearance (changed/added many elements), expanding the program settings on registration

[CHANGED] Change progressbar systems 6.x - now the progress is displayed on taskbar

[CHANGED] Fixed displacement of some elements in the form of the different operating systems.

[CHANGED] The form of display information about the operating system in the future, this form may be filled with information.

[ADDED] The field is added to the main form with the information about the computer model/motherboard

[CHANGED] Changed dialog delete index files for non-existent driver packages

[CHANGED] Increased the height of the status bar

[CHANGED] The language files are converted to Unicode, for a correct display of text.

[ADDED] In the language files (*. Lng) added parameter that determines the code page - "Charset". This parameter is required for correct display of text in elements that are not supported Unicode. For example, Russia's code page Windows 1251, and, accordingly, "Charset = 1251".

[CHANGED] Stretching the program in full screen, after screen resolution change the program if it was less than 800x600

[CHANGED] In the settings you added bordered text fields when focused


[ADDED] Added the ability to copy to the clipboard HWID (context menu)

[ADDED] Rewrote functionality for working with the command line. To date, the program provides the following initial options:

• "/?", "/h", "-h", "-help", "/help" - display the Help window;

• "/Extractdll [:path]" - extract files from program to the specified directory, if a directory is specified, the recovery is a temporary location;

• "/Regdll" - registration of software components (dll and ocx);

• "/s[(:|=) mode]", "-s[(:|=) mode]", "-s[(:|=) mode]" - Run silent mode installation of drivers, with the ability to select selection of drivers.

Parameter [mode] can be set to mode "installation (compatible drivers)" and "Installation (Full - the whole package)," respectively:

• n or n2 - Select driver packages with newer drivers

• q or q2 - Select driver packages with unknown drivers,

• a or a2 - Select all driver packages to the tab can be set.

• "/t[(:|=) time]", "-t[(:|=) time]", "-t[(:|=) time]" - time in seconds, before the start silent mode install the drivers. The default interval is 10 seconds.

[ADDED] Added functionality "Removing legacy driver packages", is available in the "Update databases".

[ADDED] Drayverpak TouchPad tested for compatibility only on laptops

[ADDED] For accurate selection of drivers for touchpad, Samlab markers introduced by producers, the right driver is located in the subfolder\%NOTEBOOK_VENDOR% _nb\

The program analyzes the information on the laptop manufacturer and marker and make a decision on the compatibility of

For complete support of all manufacturers of notebook and flexibility of the program, introduced support for the filter parameter %NOTEBOOK_VENDOR% and retrieval of information on the laptop manufacturer

To file DriversInstaller.Ini added a new section


FilterCount = 22

Filter_1 = 3Q;*3q*

Filter_2 = Acer;*acer*

Filter_3 = Alienware;*alienware*

Filter_4 = Apple;*apple*

Filter_5 = Asus;*asus*

Filter_6 = BenQ;*benq*

Filter_7 = Clevo;*clevo*

Filter_8 = Dell;*dell*

Filter_9 = eMachines;*emachines*

Filter_10 = Eurocom;*eurocom*

Filter_11 = Fujitsu;*fujitsu*

Filter_12 = Getac;*getac*

Filter_13 = Gigabyte;*gigabyte*

Filter_14 = iRU;*iru*

Filter_15 = HP;*hp*;*hewle*

Filter_16 = Lenovo;*lenovo*

Filter_17 = LG;*lg*

Filter_18 = MSI;*msi*;*micro-star*

Filter_19 = Packard;*packard* bell*

Filter_20 = Samsung;*samsung*

Filter_21 = Sony;*sony*;*vaio*

Filter_22 = Toshiba;*toshiba*

where Filter_X =%NOTEBOOK_VENDOR%; required text for information on product model, supports search mask

[FIXED] Fixed work on systems nt6 when the DEP (on Windows Server 2003 to work properly it is necessary to add a program to the exceptions DEP, until the solution is not found)

[CHANGED] Added an additional check in the formation of the restore point, as on server platforms, it does not work.

[CHANGED] Removed the obsolete driver database indexing algorithms

[CHANGED] Removed the obsolete mode "Read the drivers," now reads ever.

[CHANGED] Fixed fitting algorithm drivers if no markers in inf does not clearly indicate the version of the operating system.

[CHANGED] For information about the version of Windows is taken now by using WMI, under the old system had problems in determining the version of Windows Blue


[ADDED] Debug mode settings in a separate block of the program settings.

[ADDED] Added option "Create a log-file in the subdirectory" logs "program

[ADDED] Added the ability to create a log file with a unique name. Template file name is written in the program settings.

[ADDED] In debug mode settings added to the "Add a date and time in each line of the log file"

[CHANGED] In the setting debug mode divided the "path to log file" - now have to specify two parameters, the catalog to create a log file, and the file name pattern

[CHANGED] At the end of the debug-log added synthesis of available drivers to install, To compare the selection of drivers (more functionality added in version 5.4.4, but I was not described)


[CHANGED] Slightly modified procedure of checking software upgrade, the inaccessibility of the site.

[CHANGED] Optimizing ads Api-functions

[CHANGED] Updated Ukrainian translation (thanks Lisabon)

[CHANGED] Updated Czech translation (Thanks Tron - Marek Pavlik)

[CHANGED] Updated other language files

[CHANGED] Updated program DevManView to version V1.30

[CHANGED] Updated Program System Information Viewer to version V4.35

[CHANGED] Many other minor fixes.


Share this post

Link to post
Share on other sites

Romeo, I think the link from the first post doesn't available, also from ur official forum the latest is (18 april 2013)?


Share this post

Link to post
Share on other sites

Meet the new version of the Drivers Installer Assistant. This version has a growth rate several times , as when the program starts , and when indexing driver packages .
The program has changed the interface. Almost until the end finished work on support Unicode. Therefore, I expect regular users transfer programs into native languages.
There have been major changes in the functional program. Now the program can work with the unpacked driver packages ( but mutually exclusive mode ) .
Added the ability to create/upload the snap system for emulation of different computers.
Download, test, write reviews. Work on my projects are not complete and is constantly, albeit intermittently. On the development of the project, you can try to change history.

! Recommended a clean install, since the directory structure has been changed

Changes to the Drivers Installer Assistant [6.4.28 - PreFinal]
This list contains all changes since the last version history official publication online version 5.4.18

Version 6.4.28 PreFinal (28.04.2014)
[CHANGED] Optimize starting process, the rate increased by ~ 40 %
[CHANGED] Optimizing the indexing process, the rate increased by ~ 10-15%
[ADDED] Added command /savereport[:DIR] to save the snapshot of the operation system. If the directory [DIR] is not specified, the file is saved to the directory DebugLogPath.
[ADDED] After you run program the snapshot of the system is stored to the directory DebugLogPath
[FIXED] Fixed a rare bug in the indexing process when some HWID trimmed
[FIXED] Fixed a bug that caused the program to crash if the driver installation starts immediately after indexation ( in the same session of the program )
[FIXED] Fixed selection of drivers for touchpad
[FIXED] Fixed not update the status pictures of the driverpack's after start emulation mode
[FIXED] Several other minor bugs

Version 6.4.11 PreFinal (11.04.2014)
[CHANGED] Optimize starting process, the rate increased to ~ 2-3 times
[CHANGED] Optimizing the indexing process, the rate increased to ~ 2-3 times
[CHANGED] Optimize debug logging programs, reduced the number of messages in the standard mode . Improved readability of the log file
[CHANGED] Updated to support the operating system markers and markers laptop manufacturers (idea by SamLab)
[ADDED] Added support for markers (intel_2nd, intel_4th) to correctly install the driver Intel USB 3.0 (IUSB3\ROOT_HUB30) (idea by BadPointer)
[CHANGED] Slightly changed the format of the database (combined the "path" and "inf- file name") .
[CHANGED] Changed display prompts for the driver package button (combined the "path" and "the name of the inf- file") .
[CHANGED] The program now has a full opportunity to work with the unpacked driver packages
[CHANGED] Multiple changes/improvements to the GUI
[ADDED] Enhanced the ability to change settings through the interface: change the font controls , change the appearance of buttons driver packages
[FIXED] Fixed non font color controls
[CHANGED] Changed the icon size for the control buttons (32x32 buttons except the driver packages, they were 24x24)
[ADDED] Unicode support for all controls (except SStab)
[FIXED] Fixed display of application icons for exe- file and displayed on the Alt + Tab ( for Windows Vista +)
[CHANGED] For universality and ease of integration programs in the various collections of drivers, changed the directory structure of the program: subdirectories "Lang", "Graphics", "Docs" moved to DIA folder
[CHANGED] Configuration file .\Tools\DriversInstaller.ini renamed .\Tools\DIA.ini
[CHANGED] Temporary directory program changed to %temp%\DIA
[FIXED] Stability of the application , the program crashes arbitrary fixed (I very much hope :))
[CHANGED] Improved response programs at various operations
[CHANGED] Optimization of functions to work with files
[CHANGED] Fixed some minor bugs in the indexing process (purity database in terms of determining the device name)
[ADDED] Added ability to decompress individual drayverpakah, by pressing the right mouse button on the driver package (it was only implemented for group mode)
[CHANGED] The process of creating a restore point moved into installation mode driver (previously at startup). Created once per session of the program.
[CHANGED] Added AUTO CHANGEOVER column width when switching between all tables
[FIXED] Fixed switching between elements by pressing TAB (added focus)
[CHANGED] Improved emulation mode (save/load) to determine the parameters of the emulated system based on the image file name
[CHANGED] Changed the "About"

Version 5.12.30 Beta (30.12.2013)
    ! You must recreate the database, the program will tell about the incompatibility of the database
[CHANGED] Changed the algorithm for sorting the database on HWID
[CHANGED] Changed the algorithm to search for the HWID driver in the database
[ADDED] In order to accelerate the launch changed selection module drivers for this program for indexing , creates an additional file % driverpackName%. Hwid
[CHANGED] Cleaning the database drivers - Removed possible errors in the analysis inf- files
    As a result of the above changes, downloading programs takes ~ 2 times faster
[CHANGED] File devcon_c.cmd no longer used when running , now comes with a direct challenge devcon.exe parameters.
[FIXED] Fixed closing the program if the file was not created hwids.txt - result of the program devcon.exe. The program continued to boot and gave out a lot of errors
[FIXED] Fixed a bug run on windows 2000, the reason was the function to run external applications
[ADDED] Support of Unicode for almost all controls
[ADDED] The default font for tips Lucida Console, for all other elements Tahoma. Unless otherwise prescribed in the program settings .
[ADDED] When you switch to indexing , if not neproindeksirovannyh packages , this selection is set at "All"
[FIXED] Fixed non-creation drivers folder for indexing drivers
[FIXED] Removed all options database drivers are now creating an unconditional
[FIXED] Fixed the calculation time incorrectly calculated the time in milliseconds
[CHANGED] Removed dependency on the component richtx32.ocx - Microsoft Rich Textbox Control 6.0.
[ADDED] Added button to rebuild the window is resized or navigate through the tabs
[ADDED] Added Arabic thanks MFM Dawdeh -
[ADDED] Information about the current progress of implementation is now at the beginning of the program header

Version 5.10.29 Final (29.10.2013)
[ADDED] Added the "Save information about the devices to emulate a program on the other PC"
[ADDED] Added form for emulation . Now also allows you to select the target operating system.
[CHANGED] Fixed issue progress if more than one tab, and some of them are empty
[CHANGED] Adding additional debug messages
[CHANGED] Optimization of the program loading and indexing driver packages
[CHANGED] Improved responsiveness of the program to index the driver packages
[CHANGED] Add information on the current progress in the implementation of the program header
[CHANGED] Fixed the GUI
[CHANGED] Code optimization program
[CHANGED] Updated support for markers prozvoditelya operating systems and laptops, for the correct determination of the touchpad

Version 5.10.4 Final (04.10.2013)
[FIXED] Fixed compatibility analysis of drivers, if markers FORCED or STRICT were in the beginning.
[FIXED] Fixed some rare errors in indexing driverpack's.
[CHANGED] Performance indexing increased by 20%.
[FIXED] Fixed run the program without driverpack's.
[CHANGED] Replacement of the many elements of the interface to more stable .
[ADDED] Added partial to emulate the program to another computer on the basis of the file %Temp%\DriversInstaller\HwidsTempExt.txt, which is created each time then you start the program.
      Emulated by all except the version of the operating system. Functionality is available via the menu item - "Updating drivers database - Download information of another PC (Emulation work)".
[CHANGED] Added support for the latest markers
[CHANGED] Updated Program System Information Viewer to version V4.40
[CHANGED] Updated program Unknown Device Identifier to version V8.01
[CHANGED] Updated program DevManView to version V1.35
Version 5.7.17 Final (17.07.2013)
[CHANGED] Changed the procedure for checking updates , added a timeout waiting for a response from the server = 5 seconds , the update check is in asynchronous mode , ie without "freezing" of the program .
[CHANGED] Changed to switch between tabs in different modes
[CHANGED] Increased stability of the application, fixes random crashes the program - have been replaced with some GUI elements.
[ADDED] Added additional messages if there are no suitable driver packages in different modes of operation
[CHANGED] Work Mode "Removing older versions of the driver packages" also adapted for DriverPacksTeam Driverpack's, previously tested only on SamLab Driverpack's
[FIXED] Fixed mode "Removing non-existent database driverpack's if in the program is more than one tab
[ADDED] Added functionality (requires testing) of the unzipped driver packages. Operating mode is mutually exclusive , ie, either the directories or files.
    To enable it, set in the configuration file DriversInstaller.ini
        DP_is_aFolder = 1
[FIXED] Fixed a bug when running the program with the parameters for resource recovery program
[CHANGED] Responsiveness of the program when you start external processes
[CHANGED] Updated the other language files
[CHANGED] Updated program DevManView to version V1.30


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.