Welcome to MSFN

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


Syclone0044

iPhone / iTunes on Windows 2000

52 posts in this topic

Has anyone successfully gotten the iPhone to function with iTunes on Windows 2000?

With BlackWingCat's blog help I was able to get iTunes 7.4 installed on Windows 2000 (the minimum version to support iPhone, which also requires XP or greater). I used Fcwinen.exe from KDW to do SpecialRewrite, which allowed QuickTime and iTunes to install.

However when I start iTunes, it says:

iTunes

Windows system components that iTunes requires are missing or corrupted.

iTunes might be unable to launch or communicate with iPod or iPhone. For help repairing your operating system, click More Information.

Then, iTunes does launch and when I connect the iPhone USB it says:

The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, then install iTunes again.

In TaskMgr I see AppleMobileDevice.exe "Apple Mobile Device Service" is running, and iPodService.exe is also running. So why doesnt the iPhone work?

BlackWingCat's blog is in Japanese and has terrible Google Translation to English, so I can't follow it.

Can anyone give a straightforward guide to what needs to be done?

Edited by Syclone0044
0

Share this post


Link to post
Share on other sites

iPod Touch/iPhone Driver for Windows 2000(customized)[bM]

[bM]installation iTunes 10.1.1.14 in Windows 2000

I made iPhone Driver and release on my blog.

You can donwload it.

And I made iTunes 10.2 installer for Windows 2000.

(it requires sccbase.dll/sccsccb.dll)

It includes KDW Component, so you don't have to use KDW.

Has anyone successfully gotten the iPhone to function with iTunes on Windows 2000?

With BlackWingCat's blog help I was able to get iTunes 7.4 installed on Windows 2000 (the minimum version to support iPhone, which also requires XP or greater). I used Fcwinen.exe from KDW to do SpecialRewrite, which allowed QuickTime and iTunes to install.

However when I start iTunes, it says:

iTunes

Windows system components that iTunes requires are missing or corrupted.

iTunes might be unable to launch or communicate with iPod or iPhone. For help repairing your operating system, click More Information.

Then, iTunes does launch and when I connect the iPhone USB it says:

The software required for iPhone is not installed. Run the iTunes installer to remove iTunes, then install iTunes again.

In TaskMgr I see AppleMobileDevice.exe "Apple Mobile Device Service" is running, and iPodService.exe is also running. So why doesnt the iPhone work?

BlackWingCat's blog is in Japanese and has terrible Google Translation to English, so I can't follow it.

Can anyone give a straightforward guide to what needs to be done?

0

Share this post


Link to post
Share on other sites

Blackwingcat, your amazing! :thumbup

I've been using windows 2k for 4 years on my Thinkpad T61 and it runs like a champ with no hiccups, super stable!

I gotten a iPhone 3GS from my boy friend and trying to use it under windows 2000. Gotten SP4 with all updates and proper hotfixes. So far I've gotten iTunes 10.3.1 installed, but ran into a few issues during the installment process... :(

I've used the itw2014 utility to allow itunes 10.3.1 to be installed. I've extracted iTunes 10.3.1 into the same directory as the it21k014 tool and ran the setupit command script. It ran and came across my first issue when installing the drivers:

"SetDllDirectoryW Could not be located in the dynamic link Library KERNEL32.dll"

Then it asks me if I want to retry to cancel installing the drivers, I just ignore it and then go onto installing apple updates:

"Module C:\Program Files\Apple Software Update\ScriptingObjectModel.dll failed to register. HRESULT -2147024769 Contact your support personel"

Then when it goes onto installing iTunes itself I get another error message:

"Module C:\Program Files\iTunes\iTunesMiniPlayer.dll failed to register. HRESULT -2147023782. Contact your support personel."

I ignore it once again, but come with a error message comes up reporting that I need XP SP2 or higher. =/

Well, iTunes opens up correctly and everything works perfectly, except for syncing up my iphone. Every time I have my iphone connected and open itunes says

"iTunes was unable to load data class information from Sync Serivces. Reconnect or try agian later"

Hopefully you know moreblackwingcat .

I really enjoy all your resources for Windows 2000 and allow further use of it with new products.

0

Share this post


Link to post
Share on other sites

I released iTunes 10.4.x installer for Windows 2000 v0.20.

You may ignore any error, in the Installation.

I think your installation succeeded.

Did you install Q888609_v3 ?

If you don't install it. Apple mobile device service stays "starting" forever by setupapi.dll's bug.

Well, iTunes opens up correctly and everything works perfectly, except for syncing up my iphone. Every time I have my iphone connected and open itunes says

"iTunes was unable to load data class information from Sync Serivces. Reconnect or try agian later"

Hopefully you know moreblackwingcat .

I really enjoy all your resources for Windows 2000 and allow further use of it with new products.

Edited by blackwingcat
0

Share this post


Link to post
Share on other sites

Hi blackwingcat,

I have installed iTunes 7.3.2.6 but I get the message about it requiring Windows XP.

I have Windows 2000 Server installed on my PC and I have installed Q888609_v3 which I downloaded from your web page (http://blog.livedoor.jp/blackwingcat/archives/873798.html).

I also downloaded iTunes 10.4.x Installer for Windows 2000 itw2k020a.zip (1.9M) from your web page http://blog.livedoor.jp/blackwingcat/archives/1327962.html.

When I run setupit.cmd, I get the following and nothing is updated/installed on my PC.

=====================================================
iTunes 10.4.1 âCâôâXâgü[âëü[ for Windows 2000 v0.20a
òKÉ{Å­îÅ: Windows 2000 SP4 +SRPv2 + ì┼ÉVé╠âAâbâvâfü[âg
USB 2.0 âCâôâü[âtâFâCâX
Q888609_v3
âCâôâXâgü[âïÄ×é╔âGâëü[é¬Åoé─éÓû│Äïé­æIé±é┼é¡é¥é│éóüB
Bonjour 3.0âCâôâXâgü[âïôrÆåé┼âGâëü[é¬Åoé¢ÅÛìçé═üA
setupsub.cmdé­Ä└ìséÁé─ì─ÄÄìsé­æIéÐé▄éÀüB
=====================================================

ɵé╔msiâtâ@âCâïé­ô»éÂâtâHâïâ_é╔ôWèJéÁé─ì─ôxÄ└ìséÁé─ë║é│éóüB
Press any key to continue . . .

I hope you can help with this problem.

Thank you, Michael.

0

Share this post


Link to post
Share on other sites

Hi blackwingcat,

I have installed iTunes 7.3.2.6 but I get the message about it requiring Windows XP.

I have Windows 2000 Server installed on my PC and I have installed Q888609_v3 which I downloaded from your web page (http://blog.livedoor.jp/blackwingcat/archives/873798.html).

I also downloaded iTunes 10.4.x Installer for Windows 2000 itw2k020a.zip (1.9M) from your web page http://blog.livedoor.jp/blackwingcat/archives/1327962.html.

When I run setupit.cmd, I get the following and nothing is updated/installed on my PC.

=====================================================
iTunes 10.4.1 âCâôâXâgü[âëü[ for Windows 2000 v0.20a
òKÉ{Å­îÅ: Windows 2000 SP4 +SRPv2 + ì┼ÉVé╠âAâbâvâfü[âg
USB 2.0 âCâôâü[âtâFâCâX
Q888609_v3
âCâôâXâgü[âïÄ×é╔âGâëü[é¬Åoé─éÓû│Äïé­æIé±é┼é¡é¥é│éóüB
Bonjour 3.0âCâôâXâgü[âïôrÆåé┼âGâëü[é¬Åoé¢ÅÛìçé═üA
setupsub.cmdé­Ä└ìséÁé─ì─ÄÄìsé­æIéÐé▄éÀüB
=====================================================

ɵé╔msiâtâ@âCâïé­ô»éÂâtâHâïâ_é╔ôWèJéÁé─ì─ôxÄ└ìséÁé─ë║é│éóüB
Press any key to continue . . .

I hope you can help with this problem.

Thank you, Michael.

Hi.

It looks like you did not extract msi files in folder.

Edited by blackwingcat
0

Share this post


Link to post
Share on other sites

Hi.

It looks like you did not extract msi files in folder.

Hi BlackWingCat,

The files, contained within the zip file (itw2k020a.zip) that I downloaded from your website, are as follows.

AdvapiXP.dll

iphlpaxp.dll

KernelXP.dll

mDNSResponder.exe

MOVEEX.exe

msvcr80.dll

rplbfile.exe

sccbase.dll

sccsccp.dll

setupit.cmd

setupsub.cmd

ShellXP.dll

spw2kcnv.exe

taskkill.exe

usbaapl.sys

uxtheme.dll

Ws2_XP.dll

WTSAPIXP.dll

There are no msi files in the zip file.

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

I believe you're suppose to unpack the iTunes installer (the file you download from Apple) and place the contents in the folder with the iTunes installer (blackwingcat) files. You'll need WinZIP or WinRAR to do that. Then run the setupit.cmd file and just follow the instructions.

Edited by SearanoX
0

Share this post


Link to post
Share on other sites

I believe you're suppose to unpack the iTunes installer (the file you download from Apple) and place the contents in the folder with the iTunes installer (blackwingcat) files. You'll need WinZIP or WinRAR to do that. Then run the setupit.cmd file and just follow the instructions.

Is there a particular version of the iTunes installer, from Apple, that I should be using with the particular Zip file I downloaded from BlackWingCat's website?

Should I deinstall iTunes 7.3.2.6 before running BlackWingCat's installer?

Thanks, Michael.

0

Share this post


Link to post
Share on other sites

Yes, I would uninstall the old version of iTunes. I believe you can use the newest version of iTunes with this installer. I pretty sure it works with at least version 10.5.x.x, but don't quote me on that. I don't really use iTunes much.

0

Share this post


Link to post
Share on other sites

Hi.

You must down load itunessetup.exe which version you want to use.

(from filehippo and oldapps)

And extract it, itunes.msi and so on.

I believe you're suppose to unpack the iTunes installer (the file you download from Apple) and place the contents in the folder with the iTunes installer (blackwingcat) files. You'll need WinZIP or WinRAR to do that. Then run the setupit.cmd file and just follow the instructions.

Is there a particular version of the iTunes installer, from Apple, that I should be using with the particular Zip file I downloaded from BlackWingCat's website?

Should I deinstall iTunes 7.3.2.6 before running BlackWingCat's installer?

Thanks, Michael.

0

Share this post


Link to post
Share on other sites

Hi.

You must down load itunessetup.exe which version you want to use.

(from filehippo and oldapps)

And extract it, itunes.msi and so on.

Hi BlackWingCat,

So for version 10.4.x of iTunes, I need to use your file named itw2k020a.zip?

If I want to use version 10.5.x of iTunes, then, I need to use your files named itw2k021a.zip or itw2k021b.zip or itw2k022.zip?

I do not understand the difference between files itw2k021a.zip, itw2k021b.zip and itw2k022.zip.

Also, on your website, it says that both itw2k021b.zip and itw2k022.zip are "(1.9M with QT/Safari Only Installer)". Is this correct?

http://blog.livedoor.jp/blackwingcat/archives/1327962.html

I have found various versions on oldapps.com but I would like to know which would be the most recommended version to use?

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

Yes.

But you may use itw2k040.zip

Difference are some bug fixes and included iPhone Driver version.

The installer requires original itunes for XP 32bit installer, and you must extract it into the folder.

Hi.

You must down load itunessetup.exe which version you want to use.

(from filehippo and oldapps)

And extract it, itunes.msi and so on.

Hi BlackWingCat,

So for version 10.4.x of iTunes, I need to use your file named itw2k020a.zip?

If I want to use version 10.5.x of iTunes, then, I need to use your files named itw2k021a.zip or itw2k021b.zip or itw2k022.zip?

I do not understand the difference between files itw2k021a.zip, itw2k021b.zip and itw2k022.zip.

Also, on your website, it says that both itw2k021b.zip and itw2k022.zip are "(1.9M with QT/Safari Only Installer)". Is this correct?

http://blog.livedoor.jp/blackwingcat/archives/1327962.html

I have found various versions on oldapps.com but I would like to know which would be the most recommended version to use?

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

Yes.

But you may use itw2k040.zip

Difference are some bug fixes and included iPhone Driver version.

The installer requires original itunes for XP 32bit installer, and you must extract it into the folder.

Hi BlackWingCat,

I uninstalled iTunes 7.3.2.6.

I downloaded iTunes 10.7 (iTunesSetup107.exe) from the following page.

http://www.oldapps.com/itunes.php?old_itunes=8218

I also downloaded your installer file (itw2k040.zip).

After I extracted the files in your Zip file, I extracted the files from iTunesSetup107.exe into the same folder as you can see below.

11/03/2012 13:32 86,016 AdvapiXP.dll

08/01/2013 21:34 21,461,504 AppleApplicationSupport.msi

08/01/2013 21:34 9,531,392 AppleMobileDeviceSupport.msi

08/01/2013 21:34 2,323,456 AppleSoftwareUpdate.msi

08/01/2013 22:13 22,183 ApsDaemonDotExeError.jpg

08/01/2013 21:34 2,358,784 Bonjour.msi

08/01/2013 21:06 <DIR> exkernel

30/10/2012 14:35 94,720 iphlpaxp.dll

08/01/2013 21:34 51,696,640 iTunes.msi

08/01/2013 22:24 216,783 iTunesSetupProgressStatus.jpg

08/01/2013 09:54 5,396,660 itw2k040.zip

11/03/2012 13:32 155,136 KernelXP.dll

06/04/2011 16:20 349,472 mDNSResponder.exe

24/01/2012 15:06 45,056 MOVEEX.exe

14/05/2011 01:17 632,656 msvcr80.dll

31/10/2011 12:23 45,056 rplbfile.exe

05/08/2004 21:00 169,984 sccbase.dll

14/04/2008 07:56 169,472 sccsccp.dll

10/09/2012 03:33 73,624 SetupAdmin.exe

30/10/2012 15:00 7,601 setupit.cmd

21/05/2012 17:54 3,467 setupqt.cmd

02/02/2012 14:29 3,399 setupsf.cmd

30/10/2012 14:20 364 setupsub.cmd

30/10/2012 14:29 107 setupsub2.cmd

21/05/2012 17:57 3,182,080 ShellXP.dll

17/02/2012 14:51 45,056 spw2kcnv.exe

05/05/2011 20:24 87,040 taskkill.exe

30/10/2012 13:36 44,032 usbaapl.sys

05/05/2011 20:24 17,408 uxtheme.dll

11/03/2012 13:32 25,088 Ws2_XP.dll

05/05/2011 20:24 6,144 WTSAPIXP.dll

Next I started "setupit.cmd" and the following is the result from that.

J:\InternetDownloads\Apple\BlackWingCat\iTunes\10.6-7>setupit.cmd

=========================================================

iTunes 10.6/10.7 âCâôâXâgü[âëü[ for Windows 2000 v0.40

òKÉ{Å­îÅ: Windows 2000 SP4 +SRPv2 + ì+ÉVé¦âAâbâvâfü[âg

USB 2.0 âCâôâü[âtâFâCâX

Q888609_v3

âCâôâXâgü[âïÄ×é+âGâëü[é¬Åoé-éÓû¦Äïé­æIé±é+é¡é¥é¦éóüB

Bonjour 3.0âCâôâXâgü[âïôrÆåé+âGâëü[é¬Åoé¢ÅÛìçé-üA

setupsub.cmdé­Ä+ìséÁé-ì-ÄÄìsé­æIéÐé_éÀüB

iPod ServiceïNô«ôrÆåé+âGâëü[é¬Åoé¢ÅÛìçé-üA

setupsub2.cmdé­Ä+ìséÁé-ì-ÄÄìsé­æIéÐé_éÀüB

=========================================================

Press any key to continue . . .

System error 1060 has occurred.

The specified service does not exist as an installed service.

System error 1060 has occurred.

The specified service does not exist as an installed service.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

sccbase.dll

sccsccp.dll

2 file(s) copied.

Cant open file[Quicktime.msi]

Cant open file[Quicktime.msi]

Read file 51696640 bytes

Wrote file 51696640 bytes[1/0]

Read file 51696640 bytes

Wrote file 51696640 bytes[29/0]

Read file 9531392 bytes

Wrote file 9531392 bytes[1/0]

Read file 9531392 bytes

Wrote file 9531392 bytes[1/0]

Read file 21461504 bytes

Wrote file 21461504 bytes[20/0]

Read file 21461504 bytes

Not Changed.

Read file 2358784 bytes

Wrote file 2358784 bytes[1/0]

Read file 2358784 bytes

Wrote file 2358784 bytes[18/0]

Read file 2323456 bytes

Wrote file 2323456 bytes[18/0]

At this point a message was displayed to Restart the PC.

iTunesSetupProgressStatus.jpg

After clicking on the Yes button there was some more output in the DOS Command window but I was not able to capture that.

After restarting the PC another message was displayed as you can see in the following image.

ApsDaemonDotExeError.jpg

I hope you can help with these problems.

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

Hi.

You must ignore restart message and next step.

And the error dialog shows some times, you must close it.

If you selected restart and reboot your pc , you must reinstall it.

Hi BlackWingCat,

I uninstalled iTunes 7.3.2.6.

I downloaded iTunes 10.7 (iTunesSetup107.exe) from the following page.

http://www.oldapps.com/itunes.php?old_itunes=8218

I also downloaded your installer file (itw2k040.zip).

After I extracted the files in your Zip file, I extracted the files from iTunesSetup107.exe into the same folder as you can see below.

11/03/2012 13:32 86,016 AdvapiXP.dll

08/01/2013 21:34 21,461,504 AppleApplicationSupport.msi

08/01/2013 21:34 9,531,392 AppleMobileDeviceSupport.msi

08/01/2013 21:34 2,323,456 AppleSoftwareUpdate.msi

08/01/2013 22:13 22,183 ApsDaemonDotExeError.jpg

08/01/2013 21:34 2,358,784 Bonjour.msi

08/01/2013 21:06 <DIR> exkernel

30/10/2012 14:35 94,720 iphlpaxp.dll

08/01/2013 21:34 51,696,640 iTunes.msi

08/01/2013 22:24 216,783 iTunesSetupProgressStatus.jpg

08/01/2013 09:54 5,396,660 itw2k040.zip

11/03/2012 13:32 155,136 KernelXP.dll

06/04/2011 16:20 349,472 mDNSResponder.exe

24/01/2012 15:06 45,056 MOVEEX.exe

14/05/2011 01:17 632,656 msvcr80.dll

31/10/2011 12:23 45,056 rplbfile.exe

05/08/2004 21:00 169,984 sccbase.dll

14/04/2008 07:56 169,472 sccsccp.dll

10/09/2012 03:33 73,624 SetupAdmin.exe

30/10/2012 15:00 7,601 setupit.cmd

21/05/2012 17:54 3,467 setupqt.cmd

02/02/2012 14:29 3,399 setupsf.cmd

30/10/2012 14:20 364 setupsub.cmd

30/10/2012 14:29 107 setupsub2.cmd

21/05/2012 17:57 3,182,080 ShellXP.dll

17/02/2012 14:51 45,056 spw2kcnv.exe

05/05/2011 20:24 87,040 taskkill.exe

30/10/2012 13:36 44,032 usbaapl.sys

05/05/2011 20:24 17,408 uxtheme.dll

11/03/2012 13:32 25,088 Ws2_XP.dll

05/05/2011 20:24 6,144 WTSAPIXP.dll

Next I started "setupit.cmd" and the following is the result from that.

J:\InternetDownloads\Apple\BlackWingCat\iTunes\10.6-7>setupit.cmd

=========================================================

iTunes 10.6/10.7 âCâôâXâgü[âëü[ for Windows 2000 v0.40

òKÉ{Å­îÅ: Windows 2000 SP4 +SRPv2 + ì+ÉVé¦âAâbâvâfü[âg

USB 2.0 âCâôâü[âtâFâCâX

Q888609_v3

âCâôâXâgü[âïÄ×é+âGâëü[é¬Åoé-éÓû¦Äïé­æIé±é+é¡é¥é¦éóüB

Bonjour 3.0âCâôâXâgü[âïôrÆåé+âGâëü[é¬Åoé¢ÅÛìçé-üA

setupsub.cmdé­Ä+ìséÁé-ì-ÄÄìsé­æIéÐé_éÀüB

iPod ServiceïNô«ôrÆåé+âGâëü[é¬Åoé¢ÅÛìçé-üA

setupsub2.cmdé­Ä+ìséÁé-ì-ÄÄìsé­æIéÐé_éÀüB

=========================================================

Press any key to continue . . .

System error 1060 has occurred.

The specified service does not exist as an installed service.

System error 1060 has occurred.

The specified service does not exist as an installed service.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

sccbase.dll

sccsccp.dll

2 file(s) copied.

Cant open file[Quicktime.msi]

Cant open file[Quicktime.msi]

Read file 51696640 bytes

Wrote file 51696640 bytes[1/0]

Read file 51696640 bytes

Wrote file 51696640 bytes[29/0]

Read file 9531392 bytes

Wrote file 9531392 bytes[1/0]

Read file 9531392 bytes

Wrote file 9531392 bytes[1/0]

Read file 21461504 bytes

Wrote file 21461504 bytes[20/0]

Read file 21461504 bytes

Not Changed.

Read file 2358784 bytes

Wrote file 2358784 bytes[1/0]

Read file 2358784 bytes

Wrote file 2358784 bytes[18/0]

Read file 2323456 bytes

Wrote file 2323456 bytes[18/0]

At this point a message was displayed to Restart the PC.

%7Boption%7D

After clicking on the Yes button there was some more output in the DOS Command window but I was not able to capture that.

After restarting the PC another message was displayed as you can see in the following image.

%7Boption%7D

I hope you can help with these problems.

Arigato, Michael.

Edited by blackwingcat
0

Share this post


Link to post
Share on other sites

Hi.

You must ignore restart message and next step.

And the error dialog shows some times, you must close it.

If you selected restart and reboot your pc , you must reinstall it.

Hi BlackWingCat,

Still no success. There were lots of Error Messages.

I will post all the details tomorrow.

After trying to start iTunes, the final message I got was as follows.

"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)"

Do I need to restart the PC now?

Here is the output from "setupit.cmd".

J:\InternetDownloads\Apple\BlackWingCat\iTunes\10.6-7>setupit.cmd

=========================================================

iTunes 10.6/10.7 âCâôâXâgü[âëü[ for Windows 2000 v0.40

òKÉ{Å­îÅ: Windows 2000 SP4 +SRPv2 + ì┼ÉVé╠âAâbâvâfü[âg

USB 2.0 âCâôâü[âtâFâCâX

Q888609_v3

âCâôâXâgü[âïÄ×é╔âGâëü[é¬Åoé─éÓû│Äïé­æIé±é┼é¡é¥é│éóüB

Bonjour 3.0âCâôâXâgü[âïôrÆåé┼âGâëü[é¬Åoé¢ÅÛìçé═üA

setupsub.cmdé­Ä└ìséÁé─ì─ÄÄìsé­æIéÐé▄éÀüB

iPod ServiceïNô«ôrÆåé┼âGâëü[é¬Åoé¢ÅÛìçé═üA

setupsub2.cmdé­Ä└ìséÁé─ì─ÄÄìsé­æIéÐé▄éÀüB

=========================================================

Press any key to continue . . .

System error 1060 has occurred.

The specified service does not exist as an installed service.

System error 1060 has occurred.

The specified service does not exist as an installed service.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

INFO: No tasks running with the specified criteria.

1 file(s) copied.

Offline Move mode

1 file(s) copied.

1 file(s) copied.

Offline Move mode

1 file(s) copied.

1 file(s) copied.

Offline Move mode

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

sccbase.dll

sccsccp.dll

2 file(s) copied.

Cant open file[Quicktime.msi]

Cant open file[Quicktime.msi]

Read file 51696640 bytes

Not Changed.

Read file 51696640 bytes

Not Changed.

Read file 9531392 bytes

Not Changed.

Read file 9531392 bytes

Not Changed.

Read file 21461504 bytes

Not Changed.

Read file 21461504 bytes

Not Changed.

Read file 2358784 bytes

Not Changed.

Read file 2358784 bytes

Not Changed.

Read file 2323456 bytes

Not Changed.

The system cannot find the file specified.

Read file 214928 bytes

Not Changed.

Read file 1636240 bytes

Wrote file 1636240 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Cant open file[AppleSyncUIHandler.exe]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Cant open file[com.yahoo.go.sync.client.exe]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 1447824 bytes

Wrote file 1447824 bytes[1/0]

Read file 702352 bytes

Wrote file 702352 bytes[1/0]

Read file 51088 bytes

Wrote file 51088 bytes[1/0]

Cant open file[OutlookSyncClientHelper.dll]

Read file 55184 bytes

Wrote file 55184 bytes[1/0]

Read file 214928 bytes

Wrote file 214928 bytes[3/0]

Read file 214928 bytes

Wrote file 214928 bytes[1/0]

Read file 214928 bytes

Wrote file 214928 bytes[1/0]

Read file 10000272 bytes

Wrote file 10000272 bytes[1/0]

Read file 2463632 bytes

Wrote file 2463632 bytes[1/0]

Read file 124776 bytes

Wrote file 124776 bytes[1/0]

Read file 1079184 bytes

Wrote file 1079184 bytes[1/0]

Read file 1292176 bytes

Wrote file 1292176 bytes[2/0]

Read file 1832848 bytes

Wrote file 1832848 bytes[1/0]

Read file 2463632 bytes

Not Changed.

Read file 10000272 bytes

Not Changed.

Read file 59280 bytes

Wrote file 59280 bytes[1/0]

Read file 677776 bytes

Wrote file 677776 bytes[1/0]

Read file 1832848 bytes

Wrote file 1832848 bytes[1/0]

Read file 4974480 bytes

Wrote file 4974480 bytes[1/0]

Read file 14224 bytes

Wrote file 14224 bytes[1/0]

1 file(s) copied.

Read file 257344 bytes

Wrote file 257344 bytes[2/3]

1 file(s) copied.

1 file(s) copied.

The system cannot find the path specified.

Cant open file[QuickTimePlayer.dll]

Cant open file[QuickTimePlayer.exe]

[File:iTunes.dll]Åæé½èÀéªé▄éÁé¢(ò¤ìX:1)

[File:iTunes.exe]Åæé½èÀéªé▄éÁé¢(ò¤ìX:1)

[File:iTunesMiniPlayer.dll]Åæé½èÀéªé▄éÁé¢(ò¤ìX:1)

[File:iTunesHelper.exe]Åæé½èÀéªé▄éÁé¢(ò¤ìX:1)

Read file 21131152 bytes

Wrote file 21131152 bytes[2/3]

Read file 21131152 bytes

Wrote file 21131152 bytes[1/1]

Read file 21131152 bytes

Wrote file 21131152 bytes[1/0]

Read file 21131152 bytes

Wrote file 21131152 bytes[0/1]

Read file 421776 bytes

Wrote file 421776 bytes[1/2]

Read file 9777040 bytes

Wrote file 9777040 bytes[1/2]

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

Press any key to continue . . .

C:\Program Files\Common Files\Apple\Mobile Device Support>

Arigato, Michael.

Edited by mtbvfr
0

Share this post


Link to post
Share on other sites

Hi.

Can you show me dependency walker log file (dwi)?

Save it after load itunes.exe and profiling start.

And did your iPhone or iPad device recognize on Your PC ?

Edited by blackwingcat
0

Share this post


Link to post
Share on other sites

Hi.

Can you show me dependency walker log file (dwi)?

Save it after load itunes.exe and profiling start.

And did your iPhone or iPad device recognize on Your PC ?

Hi BlackWingCat,

There will be more than 1 post to give you all the details I documented because there are a lot of images to show.

Here are the details from the installation I attempted last night.

After starting the installation the first error message I got was as follows.

WindowsDriverEntryPointNotFound.jpg

When I clicked on OK for the above message, I got a message indicating that an Entry Point was Not Found for AppleMobileDeviceService.exe but I missed capturing an image of that message.

WindowsDriverEntryPointNotFound.jpg

AppleMobileDeviceService.exe - Entry Point Not Found

Around the same time there was also a message indicating that the Apple Mobile Device Service failed to start.

AppleMobileDeviceServiceFailedToStartMessage.jpg

I clicked on the Retry button for the Apple Mobile Device Support message (Service failed to start).

I then clicked on the OK button, multiple times, for the AppleMobileDeviceService.exe - Entry Point Not Found message.

Eventually the Apple Mobile Device Support message (Service failed to start) reappeared and I clicked on the Ignore button.

The Apple Mobile Device Support message then displayed the following and I clicked on the No button.

AppleMobileDeviceSupportRestartMessage.jpg

A message regarding the Bonjour directory appeared and I found a file called Bonjour that had a size of 342KB and a date/time of "6/4/2011 16:20".

FirstBonjourMessage.jpg

I saved that file to another directory before deleting it and then clicked on the Retry button.

I then got a message that mdnsNSP.dll failed to register.

mdnsNSPdoTdllFailedToRegister.jpg

I tried clicking on the Retry button and then the Ignore button.

I then got a message that Service 'Bonjour Service' failed to start.

BonjourServiceFailedToStart.jpg

I then clicked on the Retry button twice before clicking on the Cancel button. I am using Windows 2000 Server as the Administrator.

After clicking on the Cancel button the following message was displayed,

BonjourAreYouSureYouWantToCancel.jpg

I clicked on the Yes button and afterwards the following message appeared.

ScriptingObjectModelDotDllFailedToRegister.jpg

I clicked on Retry multiple times before clicking on Ignore.

I then got the following message.

DllRegisterServerInScriptingObjectModelDotDllSucceeded.jpg

At this point the Output for "setupit.cmd" had reached the following.

"Wrote file 14224 bytes[1/0]

1 file(s) copied.

Read file 257344 bytes

Wrote file 257344 bytes[2/3]"

I clicked on the OK button, for the above message, and I got the Windows Installer Message below.

WindowsInstallerMessage.jpg

I clicked on the OK button twice before the following was displayed.

WindowsInstallerPreparingToInstall.jpg

The above message was updated to the following.

iTunesInstallationProgress.jpg

After some seconds the following message was displayed.

iPodUpdaterExtDotDllFailedToRegister.jpg

I clicked on Retry multiple times before clicking on Ignore.

After some more seconds the following message was displayed.

iTunesMiniPlayerDotDllFailedToRegister.jpg

I clicked on Retry multiple times before clicking on Ignore.

Arigato, Michael

0

Share this post


Link to post
Share on other sites

Hi.

Can you show me dependency walker log file (dwi)?

Save it after load itunes.exe and profiling start.

And did your iPhone or iPad device recognize on Your PC ?

Second and Last Post.

I then got a message indicating that Windows XP was required.

iTunesRequiresWindowsXP.jpg

I clicked on the OK button after which the following message was displayed.

iPodServiceEntryPointNotFound.jpg

I clicked on the OK button and got the same message again as well as the message below.

iPodServiceFailedToStart.jpg

I clicked on the Ignore button and got the message displayed below.

iTunesRestartMessage.jpg

I clicked on the No button.

Now, I clicked on the OK button for the message indicating that an Entry Point could not be found for the iPod Service.

I needed to clicked on the OK button multiple times before the message disappeared.

Meanwhile the output, for setupit.cmd, had added the follwing.

1 file(s) copied.

1 file(s) copied.

The system cannot find the path specified.

Cant open file[QuickTimePlayer.dll]

Cant open file[QuickTimePlayer.exe]

[File:iTunes.dll]Åæé½èÀéªé_éÁé¢(ò¤ìX:1)

[File:iTunes.exe]Åæé½èÀéªé_éÁé¢(ò¤ìX:1)

[File:iTunesMiniPlayer.dll]Åæé½èÀéªé_éÁé¢(ò¤ìX:1)

[File:iTunesHelper.exe]Åæé½èÀéªé_éÁé¢(ò¤ìX:1)

Read file 21131152 bytes

Wrote file 21131152 bytes[2/3]

Read file 21131152 bytes

Wrote file 21131152 bytes[1/1]

Read file 21131152 bytes

Wrote file 21131152 bytes[1/0]

Read file 21131152 bytes

Wrote file 21131152 bytes[0/1]

Read file 421776 bytes

Wrote file 421776 bytes[1/2]

Read file 9777040 bytes

Wrote file 9777040 bytes[1/2]

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

1 file(s) copied.

Press any key to continue . . .

I pressed the Enter key and the Output was updated with "C:\Program Files\Common Files\Apple\Mobile Device Support>".

I tried starting iTunes and got the following message.

iTunesEntryPointNotFound.jpg

I clicked on OK and got the following message.

iTunesNotInstalledCorrectly.jpg

I clicked on OK but nothing more happened.

I tried restarting the PC but got the message you can see in the following image.

StopMessageAfterPcRestart.jpg

After 2 attempts, I was able to start the PC in Safe Mode.

I tried to remove iTunes and got the following message.

WindowsInstallerServiceCouldNotBeAccessed.jpg

I then attempted to remove Apple Mobile Device Support but got the same message above.

The same occurred for Apple Application Support.

I restarted the PC again but this time using the option for Last Known Good Configuration.

After I logged on I got the following message.

iPodServiceEntryPointNotFoundOnStartUpWithLastGoodConfig.jpg

Attaching the iPhone to a USB port causes the following message to be displayed and the "Unplug or Eject Hardware" icon to appear in the Task Manager bar.

WindowsDriverEntryPointNotFound3.jpg

However, at least the battery is being charged.

Double-Clicking on the "Unplug or Eject Hardware" icon opens the following window.

UnplugOrEjectHardware.jpg

AppleMobileDeviceUsbDriverProperties.jpg

AppleMobileDeviceUsbDriverProperties2.jpg

AppleMobileDeviceUsbDriverPropertiesTroubleshooter.jpg

With regards to "dependency walker log file", are you referring to the following.

http://dependencywalker.com/

What is the "profiling start" you have referred to? Is that an option of the "Dependency Walker" program?

Arigato, Michael

0

Share this post


Link to post
Share on other sites

It oprates on Dependency walker.

and can you also show me usbappl.sys's dwi ?

With regards to "dependency walker log file", are you referring to the following.

http://dependencywalker.com/

What is the "profiling start" you have referred to? Is that an option of the "Dependency Walker" program?

Arigato, Michael

Edited by blackwingcat
0

Share this post


Link to post
Share on other sites

It oprates on Dependency walker.

and can you also show me usbappl.sys's dwi ?

Hi BlackWingCat,

Here is my System Information in case you need it.

Dependency Walker:	2.2.6000 (32-bit)
Operating System: Microsoft Windows 2000 Domain Controller (32-bit)
OS Version: 5.00.2195 Service Pack 4
Processor: x86 Family 6 Model 10 Stepping 0, AuthenticAMD, ~1829MHz
Number of Processors: 1
Computer Name: MIKETHEBIKE
User Name: Administrator
Local Date: Saturday, 12 January 2013
Local Time: 15:32:19 SA Pacific Standard Time (GMT-05:00)
OS Language: 0x0C09: English (Australia)
Memory Load: 58%
Physical Memory Total: 2,146,942,976 (2048 MB)
Physical Memory Used: 1,259,638,784
Physical Memory Free: 887,304,192
Page File Memory Total: 3,058,589,696
Page File Memory Used: 1,202,380,800
Page File Memory Free: 1,856,208,896
Virtual Memory Total: 2,147,352,576
Virtual Memory Used: 25,329,664
Virtual Memory Free: 2,122,022,912
Page Size: 0x00001000 (4,096)
Allocation Granularity: 0x00010000 (65,536)
Min. App. Address: 0x00010000 (65,536)
Max. App. Address: 0x7FFEFFFF (2,147,418,111)

Debugging with Dependency Walker

All Dependency Walker files are in the following Zip file.

Dependency Walker files

I loaded "iTunes.exe" into Dependency Walker and then saved the result as File "iTunesAfterLoadInDependencyWalker.dwi".

I then opened the "Profile Menu/Start Profiling ..." item and selected the options you can see in the following image.

iTunesDependencyWalkerProfilingOptions.jpg

After the Profiling started, the first error message indicated that Entry Point "getaddrinfo" could not be located as shown in the following image.

iTunesDependencyWalkerEntryPointGetAddrInfoNotLocated.jpg

I clicked on the OK button.

The next message indicated that iTunes was not installed correctly as shown in the following image.

iTunesDependencyWalkerItunesNotInstalledCorrectly.jpg

I clicked on the OK button.

I then saved file "iTunesAfterProfilingByDependencyWalker.dwi" for the Profiling results.

File "usbaapl.sys" is located in the "C:\WINNT\system32\drivers" directory.

File "usbaaplrc.dll" in the "C:\WINNT\system32" directory.

I loaded "usbaapl.sys" into Dependency Walker.

The following message was displayed.

DependencyWalkerErrorsForUsbaaplDotSys.jpg

I clicked on the OK button.

I then saved File "usbaaplAfterLoadInDependencyWalker.dwi".

I opened the NTOSKRNL.EXE branch and highlighted 2 Functions as can be seen in the following image.

DependencyWalkerNtoskrnlDotExeBranch.jpg

I then opened the "Profile Menu/Start Profiling ..." item and used the same options as for iTunes.

I then saved File "usbaaplAfterProfilingByDependencyWalker.dwi".

I loaded "REGSVR32.EXE" into Dependency Walker and saved File "REGSVR32AfterLoadInDependencyWalker.dwi".

I used the following Profiling Options.

REGSVR32DependencyWalkerProfilingOptionsForUsbaaplDotSys.jpg

After the Profiling started I got the following message.

DependencyWalkerErrorsForUsbaaplDotSys2.jpg

I clicked on the OK button and saved File "usbaaplLoadedByRegsvr32AfterProfilingByDependencyWalker.dwi".

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

Your PC seems not to apply enough Windows Update. :(

You must apply All Windows Update in your PC.

0

Share this post


Link to post
Share on other sites

Your PC seems not to apply enough Windows Update. :(

You must apply All Windows Update in your PC.

Hi BlackWingCat,

I already have SP4 applied from a few years ago.

I have downloaded the "Update Rollup 1 for Windows 2000 SP4 – v2".

http://support.microsoft.com/kb/891861

Do I need any other updates?

Did I see an SP5 on your website?

Should I use "Add/Remove Programs" in Control Panel to remove iTunes etc. before applying the "Update Rollup 1 for Windows 2000 SP4 – v2" ?

Arigato, Michael.

0

Share this post


Link to post
Share on other sites

I'm not blackwingcat but I think he means that you should just run Windows Update and install everything what will show up there.

0

Share this post


Link to post
Share on other sites

I'm not blackwingcat but I think he means that you should just run Windows Update and install everything what will show up there.

Hi Tomas,

I have never used Windows Update because I was aware that it does not always work correctly and can cause further problems.

Therefore I have always downloaded "stable" Service Packs and run the associated installation for them.

When did you last use Windows Update? Did you have any problems with it?

Should I uninstall iTunes etc before applying any Windows updates?

Thanks, Michael.

Edited by mtbvfr
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.