RT Seven Lite - RC build 1.7.0 and Beta build 2.6.0 - MSFN Forum

98 Pages
« First
←
13
14
15
16
17
→
Last »

You cannot start a new topic
You cannot reply to this topic

RT Seven Lite - RC build 1.7.0 and Beta build 2.6.0 Windows 7 Configuration tool (07-12-2010) - SP1 Slipstream supported

#281 PythonJones

Group: Members
Posts: 2
Joined: 14-August 09

Posted 16 April 2010 - 01:36 PM

patelsiraj1, on 16 April 2010 - 07:23 AM, said:

I get this error when i use the latest build 1.05

Posted Image

I had the same problem and after hours of trying to figure out what was causing it turns out I had NTFS Compression disabled :blushing:

, needs to be turned on.

#282 Zumoc

Member

Group: Members
Posts: 173
Joined: 03-July 09
OS:95
Country:

Posted 16 April 2010 - 01:44 PM

Occasionally, the program closes a mistake leaving the decompressed file content wim. This happened to me with other programs and could not remove file unzipped 8-10Gb because they were recognized as operating system files actutlly on use (!!!). So I created a live version of windows7PE on a DVD and i used to go into windows disk and delete the directory. I do not know if this is your problem but if so you know how to get around. I also tried a live linux sdi Gparted but I did not see some folders. For this reason, or used a 7PE.

This post has been edited by Zumoc: 16 April 2010 - 01:56 PM

#283 jadtunrau

Junior

Group: Members
Posts: 52
Joined: 12-January 10

Posted 16 April 2010 - 01:49 PM

Wow, Ben. Terrific job on this release. So far, everything that I've tested appears to work perfectly! I have a few requests.

1.) Can you add "Sync Center" and "Crediential Manager" to the area that allows you to remove icons from the Control Panel.

2.) Would be great if you could add the ability to customize how links and menues look on the Start Menu.

#284 Zumoc

Member

Group: Members
Posts: 173
Joined: 03-July 09
OS:95
Country:

Posted 16 April 2010 - 02:18 PM

Why do no delete chinese language?

#285 aelibey

Newbie

Group: Members
Posts: 42
Joined: 04-October 08
OS:Windows 8 x64
Country:

Posted 16 April 2010 - 02:32 PM

What .iso size do you get?

#286 Tomorrow

Advanced Member

Group: Members
Posts: 357
Joined: 20-December 07
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 03:08 PM

aelibey, on 16 April 2010 - 02:32 PM, said:

What .iso size do you get?

Ben u got my Beta 1.05 Test results?.I sent u a email trough MSFN but not sure if you got it.Just checking...

#287 wazer

You gotta risk it to get the biscuits

Group: Members
Posts: 227
Joined: 24-May 05
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 03:41 PM

Hallo ben, i have another huge request.

Would it be possbile for you to hardcore the old quick launch menu like in xp or vista?.

Its where you add a new folder to taskbar and point it to C:\Users\Administrator\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch, and wupti you got the old good classic quick launch menu again.

#288 Zumoc

Member

Group: Members
Posts: 173
Joined: 03-July 09
OS:95
Country:

Posted 16 April 2010 - 08:04 PM

I have some problem (i think) with the integration of the updates hotfix ecc ecc .

The list of the update are:

Windows6.1-KB971468-x64.msu
Windows6.1-KB972270-x64.msu
Windows6.1-KB974431-x64.msu
Windows6.1-KB974571-x64.msu
Windows6.1-KB975467-x64.msu
Windows6.1-KB975560-x64.msu
Windows6.1-KB976264-v2-x64.msu
Windows6.1-KB976264-x64.msu
Windows6.1-KB976662-x64.msu
Windows6.1-KB977074-x64.msu
Windows6.1-KB977863-x64.msu
Windows6.1-KB978262-x64.msu
Windows6.1-KB978601-x64.msu
Windows6.1-KB978637-x64.msu
Windows6.1-KB979099-x64.msu
Windows6.1-KB979306-x64.msu
Windows6.1-KB979309-x64.msu
Windows6.1-KB979683-x64.msu
Windows6.1-KB980182-x64.msu
Windows6.1-KB980232-x64.msu
Windows6.1-KB980302-x64.msu
Windows6.1-KB981332-x64.msu

The problem is the same (...windows could not configure one or more system components...) describes on
http://www.msfn.org/...val-with-vlite/ .

I followed the procedure and istallation is ended but the sistem have some problem. Does not match the options that i have selected. Tomorrow i try with the source updated by 7customizer for confirm whether the problem is in the applying of the updates section.

#289 Afterimage

Group: Members
Posts: 5
Joined: 31-January 10
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 08:28 PM

Bilar Crais, on 15 April 2010 - 05:17 PM, said:

....I had integrated a cert and key with DISMtool, but RTSevenLite seems to have removed them....

Bensam56, do you have any thoughts about this? I was intending to do the same procedure.

Thank you

#290 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 10:44 PM

Afterimage, on 16 April 2010 - 08:28 PM, said:

Bilar Crais, on 15 April 2010 - 05:17 PM, said:

....I had integrated a cert and key with DISMtool, but RTSevenLite seems to have removed them....

Bensam56, do you have any thoughts about this? I was intending to do the same procedure.

Thank you

If you used unattended then it will overwrite the keys and cert

#291 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 10:46 PM

Zumoc, on 16 April 2010 - 08:04 PM, said:

Whether the OS which you are customizing is already don't have some components? Whether you used only components before?

#292 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 10:49 PM

wazer, on 16 April 2010 - 03:41 PM, said:

I'm trying to get this....

Following are the new updates:

* You can add custom registry
* Blackviper services preset
* Remove Manual setup
* I'm fixing all the above problems

This post has been edited by bensam56: 16 April 2010 - 10:49 PM

#293 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 10:50 PM

Zumoc, on 16 April 2010 - 02:18 PM, said:

Why do no delete chinese language?

You can....

#294 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 16 April 2010 - 11:08 PM

Tomorrow, on 16 April 2010 - 03:08 PM, said:

aelibey, on 16 April 2010 - 02:32 PM, said:

What .iso size do you get?

Ben u got my Beta 1.05 Test results?.I sent u a email trough MSFN but not sure if you got it.Just checking...

I got it. Thank you for the report friend

This post has been edited by bensam56: 16 April 2010 - 11:58 PM

#295 Tomorrow

Advanced Member

Group: Members
Posts: 357
Joined: 20-December 07
OS:Windows 7 x64
Country:

Posted 17 April 2010 - 01:26 AM

bensam56, on 16 April 2010 - 11:08 PM, said:

Tomorrow, on 16 April 2010 - 03:08 PM, said:

aelibey, on 16 April 2010 - 02:32 PM, said:

What .iso size do you get?

Ben u got my Beta 1.05 Test results?.I sent u a email trough MSFN but not sure if you got it.Just checking...

I got it. Thank you for the report friend

Ok.Looking forward to new features.7 Lite is getting very good already

#296 titikab

Newbie

Group: Members
Posts: 15
Joined: 22-January 05

Posted 17 April 2010 - 04:07 AM

I never get the default feature list. Is that the reason why the program keeps bugging during the removing component part?

#297 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 17 April 2010 - 04:20 AM

titikab, on 17 April 2010 - 04:07 AM, said:

I never get the default feature list. Is that the reason why the program keeps bugging during the removing component part?

Yes...if you don't get default features list then you will get exception error while removing components. By the way which version you are trying with? Tell me whats your current host OS and language of your host OS?.

Else do onething, Mount that image manually using dism, anyhow rt 7 lite wont use dism or imagex to mount

dism /mount-wim /wimfile:C:\os\sources\install.wim /index:1 /mountdir:C:\test

now,

Dism /Image:C:\test /Get-Features

now you have to get features list. Tell me whether you got the list or not

#298 titikab

Newbie

Group: Members
Posts: 15
Joined: 22-January 05

Posted 17 April 2010 - 04:47 AM

Hi Ben,

Thank you for your fast reply. Actually, I didn't have to do all that stuff because the default feature list just appeared this morning when I tried for the third time to create an iso. The weird thing is that I did nothing to take care of that bug. I noticed one guy in the berginning of the post who had exactly the same bug, I guess you should look into that.

My config is as followed : win 7 x64 ultimate, rt 7 lite 1.05, language english.

#299 azon

Newbie

Group: Members
Posts: 13
Joined: 24-October 09

Posted 17 April 2010 - 04:48 AM

Ben, could you please provide complete settings' file that you have used and tell what virtual environment you're using to test the installation?
I'm asking because just selecting components which are mentioned in your post with a piece of settings' file doesn't seem to work. I'm always getting "windows could not configure one or more system components" error at the second stage of installation (after the first reboot) for W7 Ultimate under VMWare.

#300 bensam56

RT Seven Lite Developer

Group: Members
Posts: 275
Joined: 24-February 08
OS:Windows 7 x64
Country:

Posted 17 April 2010 - 05:41 AM

azon, on 17 April 2010 - 04:48 AM, said:

I'm preparing a patch for that error....I think you selected only components removal and committed right? And tested it you go that error. It's true If you selected Integration and components then you will not get that error. But this is not the correct method actually to remove components. I'm fixing this issue.....