[Zumoc]

Ben do you have modified the WinSxs removal or it's keep like before?

[Win7User]

bensam56, on 02 May 2010 - 01:51 PM, said:

Win7User, on 02 May 2010 - 01:10 PM, said:

bensam56, on 02 May 2010 - 01:03 PM, said:

Win7User, on 02 May 2010 - 05:38 AM, said:

bensam56, on 02 May 2010 - 01:59 AM, said:

Please submit your answer sheet here

Apologies, my bad, there you go ....

bensam56, on 02 May 2010 - 02:16 AM, said:

Folders may open in new window after IE removal. Here is the fix for that

* First create a folder in Program Files as "Internet Explorer" [E.g: C:\Program Files\Internet Explorer]
* Now copy the following DLL file (ieproxy.dll) and paste it in C:\Program Files\Internet Explorer
* Finally, Restart your PC or logoff and enter again

Note: 64-bit users should also create "Internet Explorer" in Program Files (x86)

I wonder if this post was your answer to the error message I had posted. If that's the case, which would be a little puzzling as I'm not sure where I should create that "Internet Explorer" folder ?
Thanks a lot for your assistance.

Try without giving space for computer name. I saw that you gave some space between two words....

All right, I'll give that a shot and report back, thanks a lot.

Check my screenshot....



becoz i gave some space for computer name...check it below..

<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
      <ComputerName>Rock Team</ComputerName>
      <Themes>
        <WindowColor>Sky</WindowColor>
      </Themes>
    </component>

Yes, that fixed it
Still trying to iron some other oddities out, I'll keep you updated then. Thanks a lot.

[Win7User]

Windows 7 Pro x64 Lite up and running on VirtualBox 3.1.6
Host: Windows 7 Pro x64
Guest: Windows 7 Pro x64 Lite
Installation time: 10 minutes


However, I selected Windows Media Player for removal but it's still present though ....

Attached File(s)

•  Lastsession.inf (8.91K)
  Number of downloads: 24
•  Autounattend.xml (3.63K)
  Number of downloads: 18

[Win7User]

I know there's no entry for WMP in the lastsession.inf file.
The thing is, I wonder why given the fact that it had been selected for removal.

[Guillaume]

Win7User, on 03 May 2010 - 11:40 AM, said:

I know there's no entry for WMP in the lastsession.inf file.
The thing is, I wonder why given the fact that it had been selected for removal.

It's been said quite a few times before: at times components are not removed even though they were selected... Just run the component removal again on that .wim and check what hasn't been removed.

[wazer]

Hello ben thanks for the new version. Works like a charm! ...



Is there by any chance when selecting multipl drivers that you could select them all in once instead of mouse tabbing each of the drivers.

Im talking about the trick holding down shift button on the key and select from top to bottom and it marks them all.

[Guillaume]

wazer, on 04 May 2010 - 06:48 AM, said:

Hello ben thanks for the new version. Works like a charm! ...



Is there by any chance when selecting multipl drivers that you could select them all in once instead of mouse tabbing each of the drivers.

Im talking about the trick holding down shift button on the key and select from top to bottom and it marks them all.

Errr, the drivers are organized in groups, why don't you just select the group and uncheck the drivers you want to keep afterwards?

Edit: now I get it, you didn't mean selection of the drivers in the component removal section, but the selection of drivers when integrating them.

This post has been edited by Guillaume: 06 May 2010 - 12:13 PM

[bensam56]

wazer, on 04 May 2010 - 06:48 AM, said:

Hello ben thanks for the new version. Works like a charm! ...



Is there by any chance when selecting multipl drivers that you could select them all in once instead of mouse tabbing each of the drivers.

Im talking about the trick holding down shift button on the key and select from top to bottom and it marks them all.

Yes...just press CTRL + A and SHIFT + UP and DOWN arrow

[Win7User]

Guillaume, on 03 May 2010 - 12:25 PM, said:

Win7User, on 03 May 2010 - 11:40 AM, said:

I know there's no entry for WMP in the lastsession.inf file.
The thing is, I wonder why given the fact that it had been selected for removal.

It's been said quite a few times before: at times components are not removed even though they were selected... Just run the component removal again on that .wim and check what hasn't been removed.

Sorry but I must have overlooked those posts by the looks of it. Anyway, I've been running in circles for a while now as I just can't understand why items that are actually selected for removal won't actually be removed. The isn't the case for WMP only but have a look below, I selected all games to be removed ... then again
What do you reckon mates ? I mean, do I have to start from scratch again ?

Attached File(s)

•  Autounattend.xml (3.63K)
  Number of downloads: 4
•  Lastsession.inf (9.34K)
  Number of downloads: 13

[Guillaume]

You can reload the stripped installation and remove the components left behind. The problems you've described are similar to mine, but I haven't tested 1.06 yet.

[Win7User]

Guillaume, on 04 May 2010 - 09:30 AM, said:

You can reload the stripped installation and remove the components left behind. The problems you've described are similar to mine, but I haven't tested 1.06 yet.

Thanks a lot Guillaume, the is exactly the information I've been looking for. I'll report back then.

[Win7User]

Well, beat me to death but a second pass on the previously trimmed down installation package couldn't get me any further; WMP and games are still present. Quite peculiar as no entries for both have been made by the application ( I selected both for removal though )

Attached File(s)

•  Lastsession.inf (1.43K)
  Number of downloads: 17

[bensam56]

Win7User, on 04 May 2010 - 11:35 AM, said:

Well, beat me to death but a second pass on the previously trimmed down installation package couldn't get me any further; WMP and games are still present. Quite peculiar as no entries for both have been made by the application ( I selected both for removal though )

I don't know why its happening like that for you...Both the components is not listed in inf....But I'm very sure it will work.

This post has been edited by bensam56: 04 May 2010 - 12:15 PM

[bensam56]

Win7User, on 04 May 2010 - 09:37 AM, said:

Guillaume, on 04 May 2010 - 09:30 AM, said:

You can reload the stripped installation and remove the components left behind. The problems you've described are similar to mine, but I haven't tested 1.06 yet.

Thanks a lot Guillaume, the is exactly the information I've been looking for. I'll report back then.

I think you are using the previous version. I fixed it in new build 1.0.6

[Win7User]

bensam56, on 04 May 2010 - 12:18 PM, said:

Win7User, on 04 May 2010 - 09:37 AM, said:

Guillaume, on 04 May 2010 - 09:30 AM, said:

You can reload the stripped installation and remove the components left behind. The problems you've described are similar to mine, but I haven't tested 1.06 yet.

Thanks a lot Guillaume, the is exactly the information I've been looking for. I'll report back then.

I think you are using the previous version. I fixed it in new build 1.0.6

bensam56, I'm running the latest Beta 1.0.6 so I really don't know what might be the culprit(s).

[Tomorrow]

wazer, on 04 May 2010 - 06:48 AM, said:

Hello ben thanks for the new version. Works like a charm! ...



Is there by any chance when selecting multipl drivers that you could select them all in once instead of mouse tabbing each of the drivers.

Im talking about the trick holding down shift button on the key and select from top to bottom and it marks them all.

Upgrade to latest Build 1.06
Looks like you still have 1.05

This function was added in 1.06 (from my recommendation).

This post has been edited by Tomorrow: 04 May 2010 - 01:24 PM

[DMD61]

You can improve the function of post-installed applications?
The only detail that can be corrected is to ensure that the procedure ends when you stop during post install, to make this faster installations by avoiding the unnecessary prompt.



THANKS

This post has been edited by DMD61: 04 May 2010 - 03:03 PM

[Zumoc]

Fail,



The processes are stopped and is not possible to continue.

Any idea?

[bensam56]

Zumoc, on 04 May 2010 - 05:55 PM, said:

Fail,

The processes are stopped and is not possible to continue.

Any idea?

I fixed this problem now zumoc....not in 1.0.6...

[Zumoc]

Ok Ben. I did not hurry.