[RickSteele]

hclarkjr, on 06 May 2010 - 01:50 PM, said:

is this the update that is causing you the problems? Windows6.1-KB976127-v6-x64.msu if so that is the same one that caused me fits till i figured out that was the one doing it.

No, it's Windows6.1-KB943790-x64; it is an RT7 specific hangup; DISM integrates it correctly.

Thanks,
Rick

[aviv00]

hey someone could share his stable working config ? thx

[Guillaume]

aviv00, on 06 May 2010 - 07:14 PM, said:

hey someone could share his stable working config ? thx

Here ya go, it's quite rigorous, though.

What I just saw, though, is that I can't add a Bluetooth device. It simply does not show any dialog. Event Viewer shows "Windows cannot store Bluetooth authentication codes (link keys) on the local adapter". Does anyone have an idea due to which component's being absent this is?

A small request, by the way: it would really be nice to have th full service names in the .inf files for readability.

Attached File(s)

•  lastsession.inf (12.94K)
  Number of downloads: 25

This post has been edited by Guillaume: 06 May 2010 - 07:42 PM

[TheWalrus]

Ben, can you tell me very rough estimate of next version's release date? From what I read here, it seems you are close to being done with the program, at least feature-wise?...
I am asking cause I have a PC for my wife, but want to hold onto passing it to her until I can make perfect installation

[bensam56]

TheWalrus, on 07 May 2010 - 03:13 AM, said:

Ben, can you tell me very rough estimate of next version's release date? From what I read here, it seems you are close to being done with the program, at least feature-wise?...
I am asking cause I have a PC for my wife, but want to hold onto passing it to her until I can make perfect installation

yes....hopefully tonight

[TheWalrus]

Oh excellent. How is the whole thing then? Close to finished? Naturally some amount of bugs will be discovered in time, but that is normal.

[bensam56]

I did some adjustments...

* You can now set priority level
* Change start Menu ORB
* Select logon screen in two ways either by selecting direct DLL or JPG.
* Added two languages like Simplified Chinese and Traditional Chinese
* Some minor errors are fixed

This post has been edited by bensam56: 07 May 2010 - 07:19 AM

[Bilar Crais]

bensam56, on 07 May 2010 - 07:18 AM, said:

I did some adjustments...

* You can now set priority level
* Change start Menu ORB

I like those! During the last sequence when the program rebuilds the image, my computer comes to an absolute crawl - completely unresponsive. I guess I can always wait it out, or adjust the priority.

This post has been edited by Bilar Crais: 07 May 2010 - 07:58 AM

[Win7User]

bensam56, on 07 May 2010 - 04:45 AM, said:

yes....hopefully tonight

Looking forward to giving it a spin mate, thanks for the efforts.

[TheWalrus]

Same here! Installing some test environment now

[Afterimage]

bensam56, on 07 May 2010 - 07:18 AM, said:

I did some adjustments...

* You can now set priority level
* Change start Menu ORB
* Select logon screen in two ways either by selecting direct DLL or JPG.
* Added two languages like Simplified Chinese and Traditional Chinese
* Some minor errors are fixed

Could you please add the ability for the user to specify the location of whatever separately installed files/directories RT7Lite requires for operation? (WAIK, WAIK sub-components, dism, etc) It needs to be able to be set BEFORE RT7Lite is shown where the source OS files are.

I have fought with this error for almost a week now with no solution. WAIK-Win7 uninstalled/reinstalled, system32 & SysWOW64 dism directories copied from a separate Win7 x64 machine and used to replaced the ones on my machine. Nothing is working to get RT7Lite to run.

 
2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:317 - CWimMountedImageInfo::Initialize(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:94 - CWimMountedImageInfo::CreateWimMountedImageInfo(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:497 - CWimImage::InternalGetStatus(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1039 - CWimManager::InternalOpUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070057) 

Attached File(s)

•  Error.jpg (116.89K)
  Number of downloads: 9

[hclarkjr]

bensam56, on 07 May 2010 - 07:18 AM, said:

I did some adjustments...

* You can now set priority level
* Change start Menu ORB
* Select logon screen in two ways either by selecting direct DLL or JPG.
* Added two languages like Simplified Chinese and Traditional Chinese
* Some minor errors are fixed

bensam, could you please increase the startup sound limit to 15 seconds, I BEG YOU!!!

[bensam56]

Afterimage, on 07 May 2010 - 01:06 PM, said:

bensam56, on 07 May 2010 - 07:18 AM, said:

I did some adjustments...

* You can now set priority level
* Change start Menu ORB
* Select logon screen in two ways either by selecting direct DLL or JPG.
* Added two languages like Simplified Chinese and Traditional Chinese
* Some minor errors are fixed

Could you please add the ability for the user to specify the location of whatever separately installed files/directories RT7Lite requires for operation? (WAIK, WAIK sub-components, dism, etc) It needs to be able to be set BEFORE RT7Lite is shown where the source OS files are.

I have fought with this error for almost a week now with no solution. WAIK-Win7 uninstalled/reinstalled, system32 & SysWOW64 dism directories copied from a separate Win7 x64 machine and used to replaced the ones on my machine. Nothing is working to get RT7Lite to run.

 
2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:317 - CWimMountedImageInfo::Initialize(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmountedimageinfo.cpp:94 - CWimMountedImageInfo::CreateWimMountedImageInfo(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:497 - CWimImage::InternalGetStatus(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1039 - CWimManager::InternalOpUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070057)

2010-05-07 11:36:25, Error                 DISM   DISM WIM Provider: PID=3012 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0x80070057) 

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

[Afterimage]

bensam56, on 07 May 2010 - 08:37 PM, said:

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

Wimmount.sys was re-installed using "WimMountInstall.exe /install" via admin command line.

After rebooting I tried to run RT7Lite and I got the "WAIK Installation" prompt as if RT7Lite did not understand that I did have WAIK-Win7 installed.

Reinstalled WAIK, set wimmount.sys again as described above, and I still get the RT7Lite "WAIK Installation" prompt.

Any ideas?

[Zumoc]

I do not know if it is a problem already discussed but I have problems to integrate the update. The procedure starts correctly, but in reality does not integrate anything. The green progress bar indicates the progress of integration but ends too soon as if the process was skipped.The source and the update folder are located in a main disk like "C:".

This post has been edited by Zumoc: 08 May 2010 - 03:58 AM

[Zumoc]

I uninstalled AIK to 7 and the problem of integration seems to go correctly.

This post has been edited by Zumoc: 08 May 2010 - 04:34 AM

[Tomorrow]

Afterimage, on 08 May 2010 - 03:16 AM, said:

bensam56, on 07 May 2010 - 08:37 PM, said:

This is due to wimfltr.sys is registered not wimmount.sys...try installing wimmount.sys driver and restart your PC

Wimmount.sys was re-installed using "WimMountInstall.exe /install" via admin command line.

After rebooting I tried to run RT7Lite and I got the "WAIK Installation" prompt as if RT7Lite did not understand that I did have WAIK-Win7 installed.

Reinstalled WAIK, set wimmount.sys again as described above, and I still get the RT7Lite "WAIK Installation" prompt.

Any ideas?

I had the same problem.Intrestingly i did a complete Win7 reinstall on my machine.Installed 7 Lite and then installed WAIK and behold - no more prompt

This post has been edited by Tomorrow: 09 May 2010 - 03:42 AM

[Zumoc]

Hey guys,

how do I create an xml file as pendig.xml containing all the folders list updated winsxs folder?

Bye

[stefanRTR]

Hi ben,

i finally tried your tool. The first thing i noticed is that loading the image is very slow.
I think that loading the information from the image can be done alot faster maybe you can look at this.

[maxXPsoft]

Tomorrow, on 09 May 2010 - 03:42 AM, said:

I had the same problem.Intrestingly i did a complete Win7 reinstall on my machine.Installed 7 Lite and then installed WAIK and behold - no more prompt

Totally unnecessary
I may be confused to what they have on, hadn't been over here in awhile with adding language to my App
If old waik was on like used with Vlite then Uninstall old waik, delete files and reg and then install new waik if needed

Find and delete all wimmount.sys, wimserv.exe, wimfltr.sys
C:\Windows\System32\drivers
C:\Windows\SysWOW64\drivers
C:\Windows\winsxs\amd64_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_754c85adda333570
C:\Windows\winsxs\amd64_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_e4f094112e8f905d
C:\Windows\winsxs\x86_microsoft-windows-wimgapi.resources_31bf3856ad364e35_6.1.7600.16385_en-us_192dea2a21d5c43a
C:\Windows\winsxs\x86_microsoft-windows-wimgapi_31bf3856ad364e35_6.1.7600.16385_none_88d1f88d76321f27

[-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WIMMount]
[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\Root\LEGACY_WIMMOUNT]
[-HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Enum\Root\LEGACY_WIMMOUNT]
[-HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root\LEGACY_WIMMOUNT]

Thats basic since i can't find the old Waik wimmount.inf here right now but it shows all this

This post has been edited by maxXPsoft: 09 May 2010 - 10:54 AM