[BigDawgFelton]

Kullenen_Ask, on 24 July 2012 - 10:48 AM, said:

do you have this?

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]
"Class"="Image"
"ClassDesc"="@%systemroot%\\system32\\sti_ci.dll,-52"
@="Imaging devices"
"IconPath"=hex(7):25,00,73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,\
  74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
  00,74,00,69,00,5f,00,63,00,69,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,31,00,\
  30,00,30,00,30,00,00,00,00,00
"Installer32"="sti_ci.dll,ClassInstall"
"LowerLogoVersion"="5.2"

I'll have to check my registry settings in a few min. I have a meeting. I know I added all of the "sti.dll" and "stil_ci.dll" files as device manager was not seeing it as an imaging device before. I'll get back to you guys in a little while. Thanks for the quick reply.

[BigDawgFelton]

BigDawgFelton, on 24 July 2012 - 10:58 AM, said:

Kullenen_Ask, on 24 July 2012 - 10:48 AM, said:

do you have this?

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}]
"Class"="Image"
"ClassDesc"="@%systemroot%\\system32\\sti_ci.dll,-52"
@="Imaging devices"
"IconPath"=hex(7):25,00,73,00,79,00,73,00,74,00,65,00,6d,00,72,00,6f,00,6f,00,\
  74,00,25,00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,\
  00,74,00,69,00,5f,00,63,00,69,00,2e,00,64,00,6c,00,6c,00,2c,00,2d,00,31,00,\
  30,00,30,00,30,00,00,00,00,00
"Installer32"="sti_ci.dll,ClassInstall"
"LowerLogoVersion"="5.2"

I'll have to check my registry settings in a few min. I have a meeting. I know I added all of the "sti.dll" and "stil_ci.dll" files as device manager was not seeing it as an imaging device before. I'll get back to you guys in a little while. Thanks for the quick reply.

I do have the registry entry in my registry. Should there be a subkey for the actual camera? I am going to pull that key out of a working Windows installation to see if that works. The programs I am using still can't see the camera.

[Kullenen_Ask]

can you install the camera successfully?

[BigDawgFelton]

Kullenen_Ask, on 24 July 2012 - 12:38 PM, said:

can you install the camera successfully?

Yes, I installed the camera successfully using DISM to an offline copy of the system. I used the generic driver files I pulled out of %systemroot%\System32\DriverStore\FileRepository. I used the "usbvideo" files. These installed fine.

Then in device manager it wasn't showing up as an "Imaging Device" so I found out I needed the sti.dll and sti_ci.dll files. I copied all of these over and it fixed that issue. I have also tried copying all files I can find regarding "msvideo" and also all registry files I can find that relate to "usbvideo". Still doesn't work.

[Kullenen_Ask]

i asked about can you install your camera after you boot to winpe? there are so many parameters. need to investigate.

[BigDawgFelton]

Kullenen_Ask, on 24 July 2012 - 02:03 PM, said:

i asked about can you install your camera after you boot to winpe? there are so many parameters. need to investigate.

Yes this worked. I uninstalled the device via device manager and then scanned for hardware changes. I was able to automatically install the drivers as I had also preloaded them into the PE image. Should I try manually installing the drivers? This didn't fix the webcam though. It's still not working.

[BigDawgFelton]

BigDawgFelton, on 24 July 2012 - 02:10 PM, said:

Kullenen_Ask, on 24 July 2012 - 02:03 PM, said:

i asked about can you install your camera after you boot to winpe? there are so many parameters. need to investigate.

Yes this worked. I uninstalled the device via device manager and then scanned for hardware changes. I was able to automatically install the drivers as I had also preloaded them into the PE image. Should I try manually installing the drivers? This didn't fix the webcam though. It's still not working.

If I actually remove the driver when I unistall the camera, when I go to re-install using the same driver I see the message "The parameter is incorrect".

[BigDawgFelton]

BigDawgFelton, on 24 July 2012 - 02:18 PM, said:

BigDawgFelton, on 24 July 2012 - 02:10 PM, said:

Kullenen_Ask, on 24 July 2012 - 02:03 PM, said:

i asked about can you install your camera after you boot to winpe? there are so many parameters. need to investigate.

Yes this worked. I uninstalled the device via device manager and then scanned for hardware changes. I was able to automatically install the drivers as I had also preloaded them into the PE image. Should I try manually installing the drivers? This didn't fix the webcam though. It's still not working.

If I actually remove the driver when I unistall the camera, when I go to re-install using the same driver I see the message "The parameter is incorrect".

Hey Kullenen_Ask,

Any ideas I can try on this? I'm totally stumped. This is the last portion of a test image i'm creating and I just can't get it to work no matter how many things I try. Please help if you can.

[Nural]

BigdawgFelton,

Can you send post a link or a guide on how you got to this point?

I also am attempting to get a webcam working, but am not success.

[Kullenen_Ask]

My first 8 rtm winpe. It was better than to manage by compared to previous beta builds. explorer and metro not works as expected. Approximately 400mb in size with all adk packages (.net,powershell..etc.). Not profilled and optimized. My one hour work. Maybe i will work on it when i bored.

This post has been edited by Kullenen_Ask: 28 August 2012 - 12:45 PM

[lianzi2000]

Kullenen_Ask, on 13 September 2011 - 10:39 AM, said:

Check your system.hiv that contains system\controlset\control\product options as "Terminal Server"

http://hotfile.com/d...7e/acb.reg.html

Hi Kullenen_Ask,

I have been tracking the thread for quite some time, and certainly learnt a lot from it! thank you for your fantastic work.

Like you said, I don't want to use any canned PE build and determined to construct my own PE containing all and only components that I want. I'm almost done, but I encountered a problem that I can't seem to solve:There are a bunch of services that cannot be started, and the message is:

"System error 1297 has occurred.

A privilege that the service requires to function properly does not exist in the service account configuration.
You may use the Service Microsoft Management Console (MMD) snap-in (service.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and the account configuration."

i don't understand how this can happen in WinPE -- have you actually started Tapisrv and termservice services? I mean actually see them in the status of "Started"? I can't seem to start them but otherwise the system look ok (I don't see any non-functioning problem, but I didn't try pppoe etc because i don't have a modem).

Thanks in advance.

lianzi2000

[Kullenen_Ask]

A privilege that the service requires to function properly does not exist in the service account configuration.

You forgot to add your service to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost]. Change that key with normal windows 7 one. I should wrote it a few times in this topic.

Other question is yes.

[lianzi2000]

Kullenen_Ask, on 21 November 2012 - 12:39 AM, said:

A privilege that the service requires to function properly does not exist in the service account configuration.

You forgot to add your service to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost]. Change that key with normal windows 7 one. I should wrote it a few times in this topic.

Other question is yes.

But I did. I tried to copy the reg key from install.wim and from the currently running win7, still no luck. I ran regedit from PE and confirmed the [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost] is the same as normal win7, tapisrv service appears in two places: under "netsvcs" and "NetworkService". procmon does not give any useful information.

Besides this strange problem, there is a minor problem with the ShellHWDetection service: although I set the "Start" option to "2" (auto), it won't start. even if I manually start it, it immediately stop without an error message ("the service did not return an error"). I have to do a "Scan for new hardware" in the device manager window to let it start -- Using "devcon.exe rescan" or "wpeinit.exe" to replace device manager won't work.

Thanks for your help, I'll keep working on it

lianzi2000

[wimb]

tapisrv and PPPoE are working in Make_PE3

See file PE3-SYSTEM_WLAN.reg in Make_PE3\PE3_mod\PE3_reg\x86

; RasMan + ShellHWDetection + SstpSvc + TapiSrv services needed for Broadband PPPoE - ADSL Connect
......
; PPPoE package Support - Added Oct 26, 2010
.......
[HKEY_LOCAL_MACHINE\PE3-SYSTEM\ControlSet001\Control\Winlogon\Notifications\Components\Sens]
........

[lianzi2000]

Kullenen_Ask, on 21 November 2012 - 12:39 AM, said:

A privilege that the service requires to function properly does not exist in the service account configuration.

You forgot to add your service to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost]. Change that key with normal windows 7 one. I should wrote it a few times in this topic.

Other question is yes.

I got it -- the eventlog service was not configured correctly. I fixed it and now everything is working properly

[lianzi2000]

lianzi2000, on 22 November 2012 - 01:44 PM, said:

Kullenen_Ask, on 21 November 2012 - 12:39 AM, said:

A privilege that the service requires to function properly does not exist in the service account configuration.

You forgot to add your service to [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost]. Change that key with normal windows 7 one. I should wrote it a few times in this topic.

Other question is yes.

I got it -- the eventlog service was not configured correctly. I fixed it and now everything is working properly

Damit, still not working. Somehow it worked for a moment then the same error occurred. Must be something not configured right.