[Tefole]

After several days i got used with this tiny 8Gb folder
Today i recognized, that the mountpoint is not anymore ?!
I have no idea, what happened
Thx again for the effort.

This post has been edited by Tefole: 05 August 2010 - 01:16 PM

[wimb]

Kullenen_Ask, on 10 July 2010 - 04:01 PM, said:

again reg file errors and 2 dism errors.

I can get now the same reg import error and Dism error 317 as you observed.
It turns out that they ooccur when previously imagex.exe version 6.0.6001.18000 was used.
The so called fast mounting version of imagex disturbs the system.

I can solve the problem by:
Uninstall WAIK (if present)
Reboot
Install WAIK for Windows 7 having imagex version 6.1.7600
Then fresh extract and run Make_PE3 again and the reg import error and Dism error 317 are gone,
using Option 2 to make 7pe_x86.iso without WAIK

Somehow having used the fast imagex version 6001 results in a system where other mounting processes fail.

Hope this helps to solve your problem.

EDIT:
It is even more simple.
After having used imagex version 6.0.6001.18000 then I get reg import and Dism error 317
when using Option 2 without WAIK to make 7pe_x86.iso
Just reboot and use option 3 to remake 7pe_x86.iso
Then all errors are gone ....
So Reboot solves the Dism problems caused by using fast imagex version 6001

This post has been edited by wimb: 06 August 2010 - 09:50 AM

[Kullenen_Ask]

thanks. it will be super now.

EDIT:
It is even more simple.
After having used imagex version 6.0.6001.18000 then I get reg import and Dism error 317
when using Option 2 without WAIK to make 7pe_x86.iso
Just reboot and use option 3 to remake 7pe_x86.iso
Then all errors are gone ....
So Reboot solves the Dism problems caused by using fast imagex version 6001

is it means.i can use use older waik if i reboot?

[wimb]

Kullenen_Ask, on 06 August 2010 - 10:25 AM, said:

is it means.i can use use older waik if i reboot?

For Option 2 and 3 of Make_PE3.cmd then WAIK is not used.

The program needs (2x) to add s:y like this

"%TP%\AIK_Tools\%PARCH%\SetACL.exe" -on "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\Root" -ot reg -actn ace -ace "n:S-1-5-32-544;p:full;s:y"

The program needs also some changes so that old WAIK does not interfere.
Next build will solve all problems.
Until then don't use old WAIK

This post has been edited by wimb: 06 August 2010 - 11:40 AM

[Kullenen_Ask]

i read somewhere that same type of command arrays with a different one between them can result such and error. i can not find that article but googled it with error number and registry i think. there should be some command syntax that can solve it.

i didnt get error after reboot. and it works ok. it looks fully localized in turkish and small enough. will look what can i do for to get better. can work on it if i can build it.

This post has been edited by Kullenen_Ask: 06 August 2010 - 12:21 PM

[wimb]

Kullenen_Ask, on 06 August 2010 - 11:48 AM, said:

i didnt get error after reboot. and it works ok. it looks fully localized in turkish and small enough.

Good News
Hope you find some way to prevent the error without using Reboot.

This post has been edited by wimb: 08 August 2010 - 05:10 AM

[Kullenen_Ask]

*it boots really fast. how did you disable ie8 first run. i really need that registry stuff. normal windows 7 registry settings doesn't work for me. will check your settings on my winpe. wish they work it is very annoying.
-ok. i saw you merge at load. that settings doesn't work if merged offline.

*how do you put internet explorer and windos explorer to quick lauch? registry settings?
-i found that settings too. thx.

after boot there is no wallpaper. you can try this it works on me. inside a batch file or directly merge to default hiv at build.

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Desktop\General]
"WallpaperSource"="X:\\windows\\web\\wallpaper\\Windows\\img0.jpg"

oleyy. i merged your internet explorer registry and mine at default key and ie doesn't open first run anymore. and it doesn't merge at boot i merged offline.

This post has been edited by Kullenen_Ask: 07 August 2010 - 02:46 AM

[wimb]

Good to hear that you can use the program now and have nice results.

Copy your file wallpaper.jpg and PStart folder with portable programs in root of bootdrive or any other drive.

startnet.cmd will use PStart.au3 to search for wallpaper.jpg and PStart (or U_XP_SET or ASuite) folder.

In this way wallpaper.jpg is set on desktop and you can make use of Portable Programs.

Your wallpaper reg setting used at boottime does not work for me,
but using wallpaper.jpg outside the build in root of drive is more flexible and works for me.

[Kullenen_Ask]

usb automount depends on something under system services key. it worked after i change it. i merged sound registry keys for to disable audio driverfix but it didnt worked.

[wimb]

*** Update of Make_PE3 package to Create Portable Windows 7 PE ***

• Added - bootmgr.exe.mui is added to ISO for Language support at load time - Thanks to ChinaDragon
• Added - VMP31_7PE_SFX.exe added made by JFX to solve Side by Side errors for VMware-player (see folder SxS_Fix_Win7PE)
  VMWare player can be installed and used now in x86 and x64 PE environment - Thanks to JFX
  
• Added - MSI Installer files are registered at boottime using startnet.cmd - Thanks to JFX
  
• Changed - in case of Windows 7 Setup DVD as source, then 7-Zip is used to extract very fast all needed files from install.wim
  Advantage: imagex is not used anymore to mount install.wim so that Dism errors are avoided and a lot of time is saved
  
• Changed - tool control and full disk overflow conditions are improved
  
• Changed - Program Version - latest version is now 1.6

You can now select three types of filelist for building 7 PE using Explorer Shell setting as:

• NO - small using BS Explorer Shell
  
• YES - medium using Explorer Shell (default setting)
  
• + IE8 - large using Explorer Shell + Internet Explorer 8

Requirements and Info - See post #1


winbuilder.net is down so that I could not update Make_PE3 at that location
The first dowload link given above is now from MediaFire with new program Make_PE3.exe (or use mirror)

This post has been edited by wimb: 25 September 2010 - 03:04 AM

[MagicAndre1981]

where do I have to put my own drivers (ATI graphics, AHCI, network (WLAN)) so that they are integrated?

[wimb]

You can drop folder with x86 drivers in your Make_PE3\PE3_mod\WIN7_drivers\x86 folder

Read more about it in file Customize_Info.txt

[wimb]

The DirMove function of AutoIt3 is causing in Make_PE3.exe an unexpected error in OS x64 environment.
Instead of moving PE3_mod\WIN7_add\x86\1\Windows to PE3_mod\WIN7_add\x86 as asked,
the DirMove is moving to PE3_mod\WIN7_add\x86\Windows
The result is that you get wrong nesting as PE3_mod\WIN7_add\x86\Windows\Windows
which will cause error wlansvc.dll file Not found in building PE

The problem only occurs in x64 OS environment when using Make_PE3.exe

The batch program Make_PE3.cmd (run as admin using R-mouse) is doing OK

Try to use the batch program for building 7pe_x86.iso in x64 OS environment.

I will make a fix for the AutoIt3 bug for DirMove in OS x64 environment.

This post has been edited by wimb: 14 August 2010 - 12:59 PM

[MagicAndre1981]

Can you please check if the ISO entries is already present in the GRUB entry? When creating several ISO, your tools always adds new entries.

[wimb]

MagicAndre1981, on 14 August 2010 - 02:57 PM, said:

Can you please check if the ISO entries is already present in the GRUB entry? When creating several ISO, your tools always adds new entries.

But if you know that you made already an entry, then you could simply copy the new build ISO
and overwrite the previous used ISO, instead of using my tool to create a new gru4dos entry.

This post has been edited by wimb: 15 August 2010 - 12:34 AM

[MagicAndre1981]

but when I not select it, the tool never finish

[wimb]

MagicAndre1981, on 15 August 2010 - 12:17 PM, said:

but when I not select it, the tool never finish

Which tool and what do you mean exactly ?

In Make_PE3.exe you can just make 7pe_x86.iso without using the option to install on Target Drive.

[MagicAndre1981]

the GUI. Without selecting to install it never finish

[wimb]

*** Update of Make_PE3 package to Create Portable Windows 7 PE ***

• Changed - Make_PE3.exe tested and working OK in x64 Windows 7 OS
  
• Changed - hardcoded C:\Windows in driverpath replaced by @WindowsDir and %SystemRoot%
  
• Changed - Error handling improved (reg load error detected)
  
• Changed - Program Version - latest version is now 1.7

Known issue:
Previous use of imagex version 6.0.6001 (e.g. for making BB-7PE) results in reg load error when using Make_PE3 programs.
It means that when Make_PE3 has mounted boot.wim with Dism, that reg load of PE registry fails.
Solution: simply Reboot before using Make_PE3 programs to remove memory of imagex usage.

Has anyone another solution for this imagex usage issue ?


Requirements and Info - See post #1

This post has been edited by wimb: 25 September 2010 - 03:03 AM

[ChrisR]

Hi Wimb,

Make_PE3 is becoming more and more beautiful and complete.
Thank you for and also to other who helps you to improve it.

To See My French language in the start of PE7_x86.iso
windows is loading files -- > windows charge les fichiers
starting windows -- > démarrage de windows

with the variable $Parch = amd64 and $Arch = x86
bcdedit is copied in Aik_tools\x86 and to changed the locale language with it, I changed in the following code $Parch by $Arch

If $bcdlang <> "en-US" And FileExists(@ScriptDir & "\AIK_Tools\" & $Arch & "\" & "bcdedit.exe") Then
$bcdedit = @ScriptDir & "\AIK_Tools\" & $Arch & "\" & "bcdedit.exe"

RunWait(@ComSpec & " /c " & $bcdedit & " /store " _
& '"' & $PEWork & "\ISO\boot\bcd" & '"' & " /set {default} locale " & $bcdlang, $AIK_Tools & "\" & $Arch, @SW_HIDE)

RunWait(@ComSpec & " /c " & $bcdedit & " /store " _
& '"' & $PEWork & "\ISO\boot\bcd" & '"' & " /set {bootmgr} locale " & $bcdlang, $AIK_Tools & "\" & $Arch, @SW_HIDE)

RunWait(@ComSpec & " /c " & $bcdedit & " /store " _
& '"' & $PEWork & "\ISO\boot\bcd" & '"' & " /set {memdiag} locale " & $bcdlang, $AIK_Tools & "\" & $Arch, @SW_HIDE)

EndIf

It works fine for text in french at the startup of 7PE_x86.iso.

By cons, if I start PE7 with grub4dos (chainloader /Bootmgr) the text "Windows is loading files" stay in English ??? any idea to translate it with grub4dos

This post has been edited by ChrisR: 19 August 2010 - 08:02 AM