WDS Injecting Drivers into boot.wim

[AJParker]

Hello All...

I've got an HP 8100 I'm trying to deploy with WDS 2003, it appears I've injected the drivers successfully using the notes from this site:

My link

However when I try and deploy the image it does not appear (anymore) as a choice when you press F12, as if its got corrupted somehow during the modifications.

Basically the same issue as here:

My link

Any ideas?

Regards

Andrew

[AJParker]

Sorted it myself...

The drivers in the HP Service Pack had the following structure:

sp41498

sp41498\install

sp41498\install\drivers

There are drivers in the 'sp41498' and 'sp41498\install\drivers' folders.

I had used the drivers from the 'sp41498\install\drivers' folder, of which DISM had picked up two drivers. However instead I've added the drivers from the 'sp41498' folder, it picked up four, I also added the drivers to both images, 1, and 2.

Regards

[grabben]

Dism /Mount-Wim

Dism /image:mount /add-driver /Driver: path to driverfolder with sata/ahci

Dism /unmount-wim

that should work fin and the rest of the drivers to install.wim i think.

[anyweb]

Sorted it myself...

The drivers in the HP Service Pack had the following structure:

sp41498

sp41498\install

sp41498\install\drivers

There are drivers in the 'sp41498' and 'sp41498\install\drivers' folders.

I had used the drivers from the 'sp41498\install\drivers' folder, of which DISM had picked up two drivers. However instead I've added the drivers from the 'sp41498' folder, it picked up four, I also added the drivers to both images, 1, and 2.

Regards

so after you made the change you could see your image \?

Edited July 23, 2010 by anyweb