[Yzöwl]

Did you take a look at the first post where it provided you with the versions of the codecs supplied, (or did you think that thirty eight pages of nothing had happened in four years).

[lostlad]

I'm presently testing my first unattended install figured with SP3 available I'd might as well clean
up the PC. I Registered to say thank you for advice (Which I will do) but found this codec pack
and hoped to include in version2 of my unattended install (version one still installing into Virtual PC has demonstrated a typo issue).

But when I try to I get these german words in red writing

Download verweigert

Es wurde kein gültiger Referrer übergeben.
Bitte überprüfen Sie gegebenfalls Ihre Firewall-Einstellungen.

which babel fishes to:
Download does not refuse it became g?iger Referrer?rgeben. Ask?rpr?n you if necessary your Firewall attitudes.

Any Ideas?

[swgreed]

lostlad, on May 2 2008, 12:58 AM, said:

But when I try to I get these german words in red writing...

It's the same mechanism ATI uses to prevent deeplinking on their sites...
Just make sure your firewall does not block your HTTP-Referrer.
(If it's still not working, just PM me)

[lostlad]

It was OPera I had Refferer Logging turned off.
Got it with Firefox.
Thank you!!

Only getting around to finishing my slipstream now.
My ISO burn failed, at the end. I was gutted and turned off machine.

[swgreed]

Version 3.6 was released:

Quote

Updated in 3.6:
* DivX 6.8.3 [Decoder]
* XviD 1.2.0 build 2008-01-10 [Encoder/Decoder]
* Cyberlink DVD Decoder [version 8.2.0.530]
* AC3 Filter 1.50a + CPL

This post has been edited by swgreed: 08 July 2008 - 03:12 PM

[Ascii2]

Where may older versions of the codec pack be acquired?

[Yzöwl]

Which version(s) are you looking for?, or what exactly is it you're after?

If I have time I may be able to check through some of my data backups!

[Ascii2]

Yzöwl, on Jul 23 2008, 07:57 AM, said:

Which version(s) are you looking for?, or what exactly is it you're after?

If I have time I may be able to check through some of my data backups!

I have had dificulty finding information about what codecs were included in version previous to 3.6 of the MSFN codec pack. I have not been able to determine what codecs should be included in versions greater than 3.3 and less than 3.6.

I am looking for versions 3.3, 3.4, and 3.5 of the MSFN codec packs.

[Yzöwl]

Well unfortunately I've been unable to locate anything other than v3.4!

Here's the ReadMe contents just in case it helps:

 
MSFN Codec Pack v3.4

* DivX 6.7.0 [Decoder]
* XviD 1.1.3 build 2007-06-28 [Encoder/Decoder]
* Windows Media 9 VCM [version 9.0.1.1184] [Encoder]
* Windows Media 10 [version 10.0.0.4332]
* Windows Media DirectShow Decoder [version 8.0.0.4487]
* Cyberlink DVD Decoder [version 8.0.0.2103]
* Elecard MPEG 2 Demultiplexer [version 2.0.84.30429]
* Ligos Indeo XP [version 5.2820.15.58]
* Intel Indeo [version 4.51.16.2]
* Intel Indeo [version 3.24.15.03]
* Intel I.263 [version 2.55.1.16]
* MS MPEG-4 [version 4.1.0.3927] [Encoder]
* On2 VP7 [version 7.0.10.0] [Encoder/Decoder]
* MP3 Decoder [version 1.9.0.311]
* Fraunhofer IIS MPEG Layer-3 DirectShow decoder [version 1.9.0.311]
* Fraunhofer IIS MPEG Layer-3 Codec for MSACM [version 3.4.0]
* VobSub [1.0.1.3] + CPL
* AC3 Filter 1.46b + CPL
* Ogg Vorbis [version 1.1.0.79]
* GSpot 2.70a 

As you can see, the same items are unchanged from 3.4 as they are from 3.5 to the current 3.6 version, so your only changes are with DivX Decoder, XviD, Cyberlink DVD Decoder and AC3 Filter.

[Ascii2]

Yzöwl, on Aug 3 2008, 08:16 AM, said:

Well unfortunately I've been unable to locate anything other than v3.4!

Here's the ReadMe contents just in case it helps:

 
MSFN Codec Pack v3.4

* DivX 6.7.0 [Decoder]
* XviD 1.1.3 build 2007-06-28 [Encoder/Decoder]
* Windows Media 9 VCM [version 9.0.1.1184] [Encoder]
* Windows Media 10 [version 10.0.0.4332]
* Windows Media DirectShow Decoder [version 8.0.0.4487]
* Cyberlink DVD Decoder [version 8.0.0.2103]
* Elecard MPEG 2 Demultiplexer [version 2.0.84.30429]
* Ligos Indeo XP [version 5.2820.15.58]
* Intel Indeo [version 4.51.16.2]
* Intel Indeo [version 3.24.15.03]
* Intel I.263 [version 2.55.1.16]
* MS MPEG-4 [version 4.1.0.3927] [Encoder]
* On2 VP7 [version 7.0.10.0] [Encoder/Decoder]
* MP3 Decoder [version 1.9.0.311]
* Fraunhofer IIS MPEG Layer-3 DirectShow decoder [version 1.9.0.311]
* Fraunhofer IIS MPEG Layer-3 Codec for MSACM [version 3.4.0]
* VobSub [1.0.1.3] + CPL
* AC3 Filter 1.46b + CPL
* Ogg Vorbis [version 1.1.0.79]
* GSpot 2.70a 

As you can see, the same items are unchanged from 3.4 as they are from 3.5 to the current 3.6 version, so your only changes are with DivX Decoder, XviD, Cyberlink DVD Decoder and AC3 Filter.

Thanks Yzöwl, but the 3.4 version does not contain the codecs I was looking for. 3.3 would probably be the most recent version compatible with what I want.

[lsrkin]

Mpeg2 codec isn't installed. Can't play DVDs with this codec pack. Gspot and Zoom Player do not find any mpeg2 codecs.

[TranceEnergy]

I like the K-Lite codec pack, Qt Alternative lite and Real player Alternative Lite packages. They all allow you to select what folder you want to install into, in unattended mode. F.ex i place them under progfilesdir\Media\xxx And not just plan subdir of programfiles directory.

This post has been edited by TranceEnergy: 24 August 2008 - 12:57 PM

[Ascii2]

TranceEnergy, on Aug 24 2008, 01:57 PM, said:

I like the K-Lite codec pack, Qt Alternative lite and Real player Alternative Lite packages. They all allow you to select what folder you want to install into, in unattended mode.

Have you found a way of extracting the more recent versions of the packages?

[TranceEnergy]

What do you mean?

[Ascii2]

I was reffering to the extracting of recent versions of Real Alternative, QuickTime Alternative, and K-Lite codec pack installation packages (all are Inno Setup packages).

All newer installation packages have a password set disallowing preventing extraction of the packages without the set password. Older versions did not have this annoyance.

I wanted to know if you had found a way of unpacking the more recent installers.

[swgreed]

lsrkin, on Aug 7 2008, 08:54 AM, said:

Mpeg2 codec isn't installed. Can't play DVDs with this codec pack. Gspot and Zoom Player do not find any mpeg2 codecs.

It uses Cyberlink to play DVDs, but you will need at Least ZP 5.5 with updated PowerDVD8 graphs!

[TranceEnergy]

Ascii2, on Aug 25 2008, 11:05 AM, said:

I was reffering to the extracting of recent versions of Real Alternative, QuickTime Alternative, and K-Lite codec pack installation packages (all are Inno Setup packages).

All newer installation packages have a password set disallowing preventing extraction of the packages without the set password. Older versions did not have this annoyance.

I wanted to know if you had found a way of unpacking the more recent installers.

I have no idea what you are referring to. There is absolutely no password entering or such, i do not recognize the scenario you describe. I have tested installs with latest version of all just now today
in vmware and it runs perfectly.

[Ascii2]

TranceEnergy, on Aug 25 2008, 11:01 AM, said:

Ascii2, on Aug 25 2008, 11:05 AM, said:

I was reffering to the extracting of recent versions of Real Alternative, QuickTime Alternative, and K-Lite codec pack installation packages (all are Inno Setup packages).

All newer installation packages have a password set disallowing preventing extraction of the packages without the set password. Older versions did not have this annoyance.

I wanted to know if you had found a way of unpacking the more recent installers.

I have no idea what you are referring to. There is absolutely no password entering or such, i do not recognize the scenario you describe. I have tested installs with latest version of all just now today
in vmware and it runs perfectly.

If you have not understood what I had previously posted, it is likely that you have not unpacked the installers.

No password entry is prompted when running the installers.

I was not referring to the running of the installers; I was referring to the extracting of the installation packages without actually running the installers. This may be done using a tool like innounp ( http://innounp.sourceforge.net/ ) on the installer to unpack the packages. However, during attempt at unpack of the newer versions of K-Lite, QuickTime Alternative, and Real Alternative packages, unpack halts prompting for a password.

[Wolfgang16]

Hello,

what is this codecs3.6.exe doing? I expected it to unpack something and show me the readme.txt, but nothing happened. It looks like it made an unsuccessful installation. I found an DivX Configuration icon, but clicking on it says "The settings mangager was not found. Error"

bye
Wolfgang

OS: XP Pro

This post has been edited by Wolfgang16: 03 September 2008 - 04:12 PM

[zeroFX]

As is written in the first post (and the topic itself), it is a codec-pack for unattended installation. I presume, you do not know, what an unattended installation IS. You might want to check that up on wikipedia.org, the unattended page or this forum.

This post has been edited by zeroFX: 04 September 2008 - 04:43 AM