Wireless Network Bridge
Posted 26 December 2010 - 01:42 PM
I originally wanted to set up an old wireless router to do this but it seems it's not possible with some of the older models.
Posted 27 December 2010 - 10:54 AM
I haven't started doing anything yet myself except upgrade the router connected to the internet. I have my Win98 PC that I still want to get online using this method.
Posted 24 February 2011 - 11:38 AM
Looks deactivated now, but ebay it, or google shop for it.
Posted 28 November 2012 - 04:04 AM
dd-wrt compability list: http://www.dd-wrt.co...pported_Devices
Open-wrt Compability list: http://wiki.openwrt.org/toh/start
Posted 29 November 2012 - 01:21 AM
In "Basic->Setup" you have to enter your local router ip (in this case i have 192.168.1.3, since my main router got 192.168.1.1), netmask, Gateway and local dns ip are the same as the main router.
In "Basic->Advanced routing" you have to select operation mode to "router", dynamic interface to "both", interface to "lan & wlan".
In "Basic->Networking" you have to create a bridge so you have a bridge displayed under "current bridge table", which should contain "bridgename:br0" "STP enable:no" "interfaces:eth0 eth1 wl0.1".
In "Wireless->Basic" you should have a similar look:
In "Wireless->Wireless security" you should enter the same encryption as the main router has, on both interfaces wireless "wl0" and virtual interface "wl0.1".
I think this was it.. Try and post a replay if you have succeeded.
This post has been edited by KlingKlang: 29 November 2012 - 01:22 AM
- ← Access different databases from another database while not logged in?
- Networks and the Internet
- Override ClearType fonts for certain websites? →