Jump to content

Welcome to MSFN Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account


Photo

DON'T EVEN think of swapping PCB's on 7200.11

- - - - -

  • This topic is locked This topic is locked
No replies to this topic

#1
jaclaz

jaclaz

    The Finder

  • Developer
  • 14,024 posts
  • OS:none specified
  • Country: Country Flag
Dear user :),
you have probably been pointed here because you completely failed to read the FGA's and particularly FGA #1:
http://www.msfn.org/...-720011-drives/

1. I have exactly the same HDD in my other computer. Will a PCB swap work?
No. Although that used to work on some older models, in newer HDD's like the Seagate 7200.11, the PCB is specific to the drive and you risk frying both if you try that.


You also completely failed to read the main thread, where very often a new member, just like you, thinks to be smart and that he can get away with a PCB swap, a few examples:
http://www.msfn.org/...=128807&st=1821
http://www.msfn.org/...=128807&st=2173
http://www.msfn.org/...=128807&st=2240
http://www.msfn.org/...howtopic=145290
http://www.msfn.org/.../page__st__3063
http://www.msfn.org/.../page__st__3345

Now, swapping PCB's is in this case a very bad idea, and deemed to failure. It is NOT new, and it´s offending the intelligence of the people who found/developed the methods to recover from a BSY or LBA0 error, and a kind of lack of respect towards the ones that try to help others in following that procedure, and that spent a lot of time in wording both the read-me-first (which should be read FIRST):
http://www.msfn.org/...-read-me-first/
and the FGA's:
http://www.msfn.org/...-720011-drives/

It also does not stand a logical verification.

You had this great new idea, allright :thumbup : since it's new, then noone has ever tested it, thus noone can possibly tell you if it will work or it won't. :ph34r:

On the other hand, asking if it will work on the main thread dedicated to bricked 7200.11, implies that you presume that peeps in there do know where their towel is, and know more (or better) than you on this specific topic. :whistle:

So, these guys/gals are recommending a rather complex procedure, involving a data converter and issuing a set of commands to the drive, and you come to ask them if a much simpler procedure (swapping PCB's) will work? :w00t:

What do you think they will answer you?

A typical answer would be:
[sarcasm]
Sure it will work, the reason why we use and advice another and much more complex and error prone procedure is basically because we like deceiving other people and make things that are completely unneeded, and besides we are covertly financed by the USB-to-TTL and RS232-to-TTL sellers lobby, we already tricked several hundreds people into buying this completely unneeded hardware, so we are pretty good at it.
[/sarcasm]


As a known shoe manufacturer would say:
Just do it!

Only, please don't come here whining :ph34r: it didn't work. :no:

jaclaz


How to remove advertisement from MSFN



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users



How to remove advertisement from MSFN