[theKramer]

theKramer, on 15 July 2011 - 01:07 PM, said:

Since I am using Windows 7 Home Premium, should I delete the following line from the dism batch file:
dism.exe /image:d:\s3 /remove-package /packagename:Microsoft-Windows-HomePremiumEdition-wrapper~31bf3856ad364e35~amd64~~6.1.7601.17514

Since I am not using Ultimate, should I add a line like:
dism.exe /image:d:\s3 /remove-package /packagename:Microsoft-Windows-UltimateEdition-wrapper~31bf3856ad364e35~amd64~~6.1.7601.17514

Thx

Hmmm. Removing "UltimateEdition-wrapper" failed and caused all packages after it to fail also....
Anyone know why, since I am on Windows 7 HP.....

[myselfidem]

You can use:
Dism /Image:C:\Mounted_Folder /Get-Packages >C:\Packages.txt

Using Dism.exe inside = C:\Windows\System32\Dism.exe
Frist, it's needed to mount the image.

And look at the file Packages.txt, to know the Packages inside your Windows 7!

For information, you can also find all Packages and updates installed (.cat and .mum files) on your computer, inside: C:\Windows\servicing\Packages

*Edit: post updated

This post has been edited by myselfidem: 16 July 2011 - 10:45 AM

[theKramer]

Does removing these wrapper packages break anything??

i.e. since I am using a Home Premium disk, is it ok for me to remove the package via dism: Microsoft-Windows-HomePremiumEdition-wrapper~31bf3856ad364e35~amd64~~6.1.7601.17514

This post has been edited by theKramer: 15 July 2011 - 05:09 PM

[myselfidem]

I think it's better to keep this Package!

With your Windows 7 HOMEPREMIUM 64-bit disk you must remove some lines inside: 7dismx64.bat, because some Packages doesn't exist for Windows 7 Homepremium!
Check with your Packages.txt!

This post has been edited by myselfidem: 16 July 2011 - 07:17 AM

[theKramer]

myselfidem, on 15 July 2011 - 04:28 PM, said:

You can use:
Dism /Image:C:\Mounted_Folder /Get-Packages >C:\Packages.txt

Using Dism.exe inside = C:\Windows\System32\Dism.exe
Frist, it's needed to mount the image.

And look at the file Packages.txt, to know the Packages inside your Windows 7!

Hi. Me again.
I created the file Packages.txt, and I found that it contains packages with 6.1.7601.17514 (SP1 packages) and also 6.1.7600.16385 (non SP1 packages). I presume this is because I upgraded my non SP1 Windows 7 image with SP1 via RT7Lite.

Some of the non-SP1 packages have the following state:
State : Install Pending and others have the state:
State : Uninstall Pending

Should I remove both or just ignore the non SP1 packages?

Also, do I need to specify both en-us packages and those that do not contain en-us into my dism7x64.bat file for removal, or will dism automatically remove both?


Thx.

This post has been edited by theKramer: 25 July 2011 - 12:20 PM

[Madhits45]

theKramer, on 25 July 2011 - 12:05 PM, said:

myselfidem, on 15 July 2011 - 04:28 PM, said:

You can use:
Dism /Image:C:\Mounted_Folder /Get-Packages >C:\Packages.txt

Using Dism.exe inside = C:\Windows\System32\Dism.exe
Frist, it's needed to mount the image.

And look at the file Packages.txt, to know the Packages inside your Windows 7!

Hi. Me again.
I created the file Packages.txt, and I found that it contains packages with 6.1.7601.17514 (SP1 packages) and also 6.1.7600.16385 (non SP1 packages). I presume this is because I upgraded my non SP1 Windows 7 image with SP1 via RT7Lite.

Some of the non-SP1 packages have the following state:
State : Install Pending and others have the state:
State : Uninstall Pending

Should I remove both or just ignore the non SP1 packages?

Also, do I need to specify both en-us packages and those that do not contain en-us into my dism7x64.bat file for removal, or will dism automatically remove both?


Thx.

I'm also wondering about the install pending and uninstall pending. Apparently from reading over at technet these are delt with at install time. But does that mean we have extra crap in our image waiting to be deleted? That is what I am not sure about. Dism cleanup does not fix this. That only works for deleting sp1 files from the winsxs directory. Kinda frustrating that those are shown that way.

As for the packages with EN-us and ones without. It appears if you remove the EN-us one the regular one will also be removed. If you put both in your remove bat DISM will say the second none language one is not a valid package. So it appears they are tied together. Why they show as different packages is beyond me. Why does MS have a lang part for every packages and not 1 big lang pack. That would make sense.

Hope that helps.

[myselfidem]

theKramer, on 25 July 2011 - 12:05 PM, said:

I don't use RT Se7en Lite to integrate SP1, but I use sysprep method and imagex.exe to capture my new install.wim image with SP1 installed:

You can watch the videos:

http://www.wincert.net/forum/index.php/topic/7384-video-windows-7-aikopk-deployment-101-updated/

Packages inside my image using sysprep to integrate SP1 (IE9 was installed after on the mounted image Offline):

Spoiler

Outil Gestion et maintenance des images de d‚ploiement
Version : 6.1.7600.16385

Version de l'imageÿ: 6.1.7601.17514

Liste des packagesÿ:

Identit‚ du package : Microsoft-Hyper-V-Common-Drivers-Package~31bf3856ad364e35~x86~~6.1.7601.17514
�tat : Install‚
Type de version : Feature Pack
Heure d'installation : 12/03/2011 11:50

etc...

Identit‚ du package : Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~x86~en-US~9.4.8112.16421
�tat : Installation en attente
Type de version : Language Pack
Heure d'installation : 26/03/2011 10:02

Identit‚ du package : Microsoft-Windows-InternetExplorer-Optional-Package~31bf3856ad364e35~x86~fr-FR~8.0.7601.17514
�tat : D‚sinstallation en attente
Type de version : Language Pack
Heure d'installation : 12/03/2011 11:50

Identit‚ du package : Microsoft-Windows-InternetExplorer-Optional-Package~31bf3856ad364e35~x86~fr-FR~9.4.8112.16421
�tat : Installation en attente
Type de version : Language Pack
Heure d'installation : 26/03/2011 10:02

etc...

Identit‚ du package : Package_1_for_KB976902~31bf3856ad364e35~x86~~6.1.1.17514
�tat : Install‚
Type de version : Update
Heure d'installation : 12/03/2011 11:16

Identit‚ du package : Package_for_KB976902_RTM~31bf3856ad364e35~x86~~6.1.1.17514
�tat : Install‚
Type de version : Update
Heure d'installation : 12/03/2011 11:16

Identit‚ du package : Package_for_KB976902~31bf3856ad364e35~x86~~6.1.1.17514
�tat : Install‚
Type de version : Update
Heure d'installation : 12/03/2011 11:16

Identit‚ du package : Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514
�tat : Install‚
Type de version : Service Pack
Heure d'installation : 12/03/2011 11:39

The full Packages List is only given with install_wim_tweak.exe

Anyway I don't use this method, doesn't work for me...I use this one:

http://www.msfn.org/...64-bit-updated/

This post has been edited by myselfidem: 26 July 2011 - 04:22 AM

[myselfidem]

theKramer, on 25 July 2011 - 12:05 PM, said:

Should I remove both or just ignore the non SP1 packages?

Also, do I need to specify both en-us packages and those that do not contain en-us into my dism7x64.bat file for removal, or will dism automatically remove both?

YES! But...

After testing integrated SP1 with Se7en_UA you can remove FIRST Packages with 6.1.7601.17514 (SP1) and AFTER the same Packages 6.1.7600.16385!

*Edit:post updated

This post has been edited by myselfidem: 26 July 2011 - 12:02 PM

[theKramer]

[/quote]

NO!

After testing integrated SP1 with Se7en_UA it's ONLY needed to remove Packages with 6.1.7601.17514 (SP1)!
[/quote]
I will reintegrate SP1 with Se7en_UA instead of RT7lite. Have read of some issues with RT7lite, in general, so I think it would be better to slipstream again.

Thanks a lot for for your help.

[myselfidem]

Yes, I think it's better to use Se7en_UA to integrate SP1, and you will see all Packages amd64~~6.1.7600.16385 and amd64~~6.1.7601.17514.

You can remove Packages amd64~~6.1.7601.17514 FIRST and AFTER the same Packages for amd64~~6.1.7600.16385

Extract Output command window. After removing the Packages 6.1.7601.17514...removed THE SAME Packages 6.1.7600.16385 (example: Windows 7 x86).

SP1 integrated with Se7en_UA!

---------------------------------------------------------------------------------------
Outil Gestion et maintenance des images de déploiement
Version : 6.1.7600.16385

Version de l'image : 6.1.7601.17514

Traitement de 1 sur 1 - Suppression du package Microsoft-Hyper-V-Common-Drivers-Package~31bf3856ad364e35~x86~~6.1.7600.16385
[==========================100.0%==========================]
L'opération a réussi.

Outil Gestion et maintenance des images de déploiement
Version : 6.1.7600.16385

Version de l'image : 6.1.7601.17514

Traitement de 1 sur 1 - Suppression du package Microsoft-Hyper-V-Guest-Integration-Drivers-Package~31bf3856ad364e35~x86~~6.1.7600.16385
[==========================100.0%==========================]
L'opération a réussi.

Outil Gestion et maintenance des images de déploiement
Version : 6.1.7600.16385

Version de l'image : 6.1.7601.17514

Traitement de 1 sur 1 - Suppression du package Microsoft-Windows-Anytime-Upgrade-Results-Package~31bf3856ad364e35~x86~~6.1.7600.16385
[==========================100.0%==========================]
L'opération a réussi.

etc...

--------------------------------------------------------------------------------

This post has been edited by myselfidem: 26 July 2011 - 11:56 AM

[dodenko]

Question would this work on Windows Embbeded Standard 7.This reaches Max file space of 4 gb.
Media Center WMP,Aero basicly everything and you can even remove winsxs

[Dimtrij]

Could please somebody uploads the final guide for Win 7 x64 (without SP1)? (all links are down and offline)

Without this guide is this topic not helpful, because dead0 write only about first step...but what is next?

Thank you.

This post has been edited by Dimtrij: 05 September 2011 - 12:39 PM

[Hybrid Keyrayder]

Dimtrij, on 05 September 2011 - 12:38 PM, said:

Could please somebody uploads the final guide for Win 7 x64 (without SP1)? (all links are down and offline)

I'll make a new pdf with all the instructions if you still need it.

[vhasp]

Hybrid Keyrayder, on 27 September 2011 - 04:35 AM, said:

I'll make a new pdf with all the instructions if you still need it.

I would appreciate that very much (in my case Win7+sp1). Can I ask you for that? Thanks a lot.

[AlexCeed]

I''ve a temporary pdf. Download

[AlexCeed]

For those that read dead0's guide, at which point was it safe to integrate updates?
I want to integrate .msu updates with dism but vlite crashes when used with an updated 7 source.

[monohouse]

platform is windows 7 SP1 x64, target is the same
I have an Error: 0x800f0830 when trying to execute the DISM batch
installed windows 7 AIK KB3AIK_EN.iso
mounted the image with gimagex.exe x64 from amd64 directory
enable read and write and commit changes
mounting worked successfully

Spoiler

Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.

J:\W7SP1DEAD0\sources>dism7x64.bat

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Hyper-V-Common-Drivers-Package~31bf3856ad364e35~amd64~~6.1.7601.17514


Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385

Processing 1 of 1 -
Microsoft-Hyper-V-Common-Drivers-Package: The specified image is no longer servi
ceable.
Unmount the image and discard your changes. Mount the original image to try the
operation again.
Error: 0x800f0830

Error: 0x800f0830

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Hyper-V-Guest-Integration-Drivers-Package~31bf3856ad364e35~amd64~~6.1
.7601.17514

Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385

Processing 1 of 1 -
Microsoft-Hyper-V-Guest-Integration-Drivers-Package: The specified image is no l
onger serviceable.
Unmount the image and discard your changes. Mount the original image to try the
operation again.
Error: 0x800f0830

Error: 0x800f0830

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Windows-Anytime-Upgrade-Results-Package~31bf3856ad364e35~amd64~~6.1.7
601.17514

Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385

An error occurred trying to open - Microsoft-Windows-Anytime-Upgrade-Results-Pac
kage~31bf3856ad364e35~amd64~~6.1.7601.17514 Error: 0x800f0805
The specified package is not valid Windows package.

Error: 0x800f0805

The specified package is not valid Windows package.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Windows-Backup-Package~31bf3856ad364e35~amd64~~6.1.7601.17514

Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385

Processing 1 of 1 -
Microsoft-Windows-Backup-Package: The specified image is no longer serviceable.

Unmount the image and discard your changes. Mount the original image to try the
operation again.
Error: 0x800f0830

Error: 0x800f0830

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Windows-BLB-Client-Package~31bf3856ad364e35~amd64~~6.1.7601.17514

Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385

Processing 1 of 1 -
Microsoft-Windows-BLB-Client-Package: The specified image is no longer serviceab
le.
Unmount the image and discard your changes. Mount the original image to try the
operation again.
Error: 0x800f0830

Error: 0x800f0830

DISM failed. No operation was performed.
For more information, review the log file.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

J:\W7SP1DEAD0\sources>dism.exe /image:i:\dead0mount /remove-package /packagename
:Microsoft-Windows-BusinessScanning-Feature-Package~31bf3856ad364e35~amd64~~6.1.
7601.17514

Deployment Image Servicing and Management tool
Version: 6.1.7601.17514

Image Version: 6.1.7600.16385


Attempting to cancel the operation...


Error: 1223

Operation was incomplete because of a cancel request.

The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Terminate batch job (Y/N)? y

J:\W7SP1DEAD0\sources>

Update: Corrected by restarting process from the very beginning, the problem was with the image file gone through the process of apply>create before mount
the complete combined process for x64 SP1 is

Spoiler

install windows 7 AIK KB3AIK_EN.iso
copy the correct (x86 to x86 amd64 to amd64) version of gimagex.exe to%KB3AIK_EN.iso_destination_directory%\tools\%platform% and launch gimagex.exe
go to mount and select the install.wim image with gimagex.exe, make sure to select read and write and commit changes then press mount
download "install wim tweak" from http://www.msfn.org/...77#entry972077p and put the exe somewhere you can find it
start a command prompt as administrator and execute the tweak exe, give the destination mount directory at the program's prompt
once the tweak.exe is finished, edit the dism bat (dism7x64.bat) and change the c:\s2 directory to your mount directory then copy the modified bat to the source directory (that is your copied windows ISO directory\sources) launch the dism bat (dism7x64.bat) (either from the same command prompt or a new one as administrator) from the sources directory under the main ISO directory, for example: c:\s1\sources

Update: now I have a different problem: vlite 1.2 crashes after the Cleaning step, I tried to not remove most of the components and it doesn't help, it's not a component-related crash, I did the apply/create with WAIK 1.1 after the DISM bat (dism7x64.bat)

This post has been edited by monohouse: 12 May 2012 - 12:18 AM

[vhatp]

AlexCeed, on 06 February 2012 - 11:49 AM, said:

I''ve a temporary pdf. Download

Hi there, can I ask for a re-upload?

Or - Can somebody provide some complete, updated instructions (and probably batches a.s.o) for W7U SP1 x86?
I've been trying to struggle through it for half a year, no real succes, going desperate.
Thanks a lot!

This post has been edited by vhatp: 05 September 2012 - 02:37 AM

[AlexCeed]

I contacted a friend of mine and asked him to remake his previously attached guide.
I verified the contents and the instruction are the same as dead0 (almost). Post here if you have trouble with the instructions.
I would like the mods to place this attachment to the first post of this thread if it would be possible.

Attached File(s)

•  dead0-7SP1-lite.pdf (82.81K)
  Number of downloads: 51

[shutfu]

when following the latest guide you posted AlexCeed, the folder s2 isnt empty after the apply/capture process so it cant be used in the mount process. also the stuff that is in it cant be completely deleted. I'm having a hell of a time getting everything deleted.