[Ekttob]

xrayner, on 15 December 2011 - 08:30 PM, said:

Ekttob, on 15 December 2011 - 08:02 AM, said:

xrayner, on 15 December 2011 - 07:03 AM, said:

I install the newest BuClean Studio (v5.0) on WIN7 SP1. The "Enable Customization" checkbox is gray when open the source of WIN7_PRO_SP1_VL CHS version.

Hello, Thank you very much for reporting this problem.
However the problem my occur due to a corrupted version of Windows. Please try to use another image.
In addition to that, those expectations may be wrong so please do attach us a copy of your BuCleanLog.txt you will find that at the Local Drive (C:\)

Furthermore, a new release of BuClean will be unveiled in the next few days, So please provide us with the log.

Thank you very much

BuClean Team

Here is the log file, and I also find that there is a warning message says 'Ekttob\temp\ImagesInfo.xml is used by another process ... ' when exit 7mizer

Well we have reported that issue, and you are recommended to use another version of Windows, Because the image you use is not valid!

Regards,

[Fairbod]

 BuCleanLog.txt (1.28K)
Number of downloads: 13
Hi,
first thanks for the hard work gone into building a free tool for us all, secondly Festive Greetings

Thought I'dd give it a whirl as I like the AIO idea saves me some thinking

ran the installer on W7 x64 SP1 (fully updated) host machine and it didn't get past the splash screen:

BuClean loads and demands Windows WAIK which is already installed in %ProgramFiles% (default install) and all tools have been added into Windows\System32 for ease of use too.
When showing the program where my WAIK is it demands do I wish to use IA64 or AMD64 ? Doesn't matter what I chose clicking either choice makes it disappear and I'm left with a Splash screen which requires task manager to close it down !
With the WAIK choice buttons if I tell it where the imagex or oscdimg files are located ,the box closes leaving me with the Splash Screen. Haven't tried DLing the whole WAIK button as I know my install is fine.

I've been using these files so I know they are installed and working correctly. Log says very little but I've attached it .
Any help appreciated thxs.
Best regards Fairbod

[digital john]

hi,
i have the same problem as fairbod.
i'm running windows 7 x64 sp1

This post has been edited by digital john: 16 January 2012 - 06:25 PM

[MagicAndre1981]

topic was reopened. But the software still fails to detect WAIK, so it is useless.

[dzed]

MagicAndre1981, on 16 January 2012 - 04:48 PM, said:

topic was reopened. But the software still fails to detect WAIK, so it is useless.

faild to auto detect WAIK

digital john, on 16 January 2012 - 04:06 PM, said:

hi,
i have the same problem as fairbod.
i'm running windows 7 x64 sp1

same problem here, running Windows 7 SP1 x64 Ultimate

[digital john]

is this application project alive?

[dzed]

digital john, on 27 January 2012 - 04:44 AM, said:

is this application project alive?

I do not know where I read this, but it seems that there is a possibility to integrate this project with 7Customizer

[czyt]

Thx,really a nice tool!but for we chinese,we can not download your software for GFW.any other download link?

[Ekttob]

Fairbod, on 27 December 2011 - 12:12 AM, said:

BuCleanLog.txt
Hi,
first thanks for the hard work gone into building a free tool for us all, secondly Festive Greetings

Thought I'dd give it a whirl as I like the AIO idea saves me some thinking

ran the installer on W7 x64 SP1 (fully updated) host machine and it didn't get past the splash screen:

BuClean loads and demands Windows WAIK which is already installed in %ProgramFiles% (default install) and all tools have been added into Windows\System32 for ease of use too.
When showing the program where my WAIK is it demands do I wish to use IA64 or AMD64 ? Doesn't matter what I chose clicking either choice makes it disappear and I'm left with a Splash screen which requires task manager to close it down !
With the WAIK choice buttons if I tell it where the imagex or oscdimg files are located ,the box closes leaving me with the Splash Screen. Haven't tried DLing the whole WAIK button as I know my install is fine.

I've been using these files so I know they are installed and working correctly. Log says very little but I've attached it .
Any help appreciated thxs.
Best regards Fairbod

digital john, on 16 January 2012 - 04:06 PM, said:

hi,
i have the same problem as fairbod.
i'm running windows 7 x64 sp1

MagicAndre1981, on 16 January 2012 - 04:48 PM, said:

topic was reopened. But the software still fails to detect WAIK, so it is useless.

Thank you very much, But we were busy doing some works and the new year has made it more harder to upload the latest version.

dzed, on 17 January 2012 - 07:21 AM, said:

MagicAndre1981, on 16 January 2012 - 04:48 PM, said:

topic was reopened. But the software still fails to detect WAIK, so it is useless.

faild to auto detect WAIK

digital john, on 16 January 2012 - 04:06 PM, said:

hi,
i have the same problem as fairbod.
i'm running windows 7 x64 sp1

same problem here, running Windows 7 SP1 x64 Ultimate

digital john, on 27 January 2012 - 04:44 AM, said:

is this application project alive?

dzed, on 27 January 2012 - 09:43 AM, said:

digital john, on 27 January 2012 - 04:44 AM, said:

is this application project alive?

I do not know where I read this, but it seems that there is a possibility to integrate this project with 7Customizer

czyt, on 31 January 2012 - 04:43 AM, said:

Thx,really a nice tool!but for we chinese,we can not download your software for GFW.any other download link?

Thank you all guys for reporting bugs. However the reason for being late to upload and release the latest version was the amount of holidays for the new year. Also there were some problems that we have fixed which includes:
1. WAIK Detection
2. Splash Screen hanging
3. Optimized performance
Also we have added some new features like
1. Components Removal (Fully supported after co-operating with 7Custimzer)
2. Multilingual

Release time should be some time in this week.

Thank you again for all of your efforts to help us improve the software. Also a big thank to this forum for being so patient about the software and its status, They also pressed us to finish the software Thank you.

Best Wishes,

BuClean Team,

[Ekttob]

Fairbod, on 27 December 2011 - 12:12 AM, said:

BuCleanLog.txt
Hi,
first thanks for the hard work gone into building a free tool for us all, secondly Festive Greetings

Thought I'dd give it a whirl as I like the AIO idea saves me some thinking

ran the installer on W7 x64 SP1 (fully updated) host machine and it didn't get past the splash screen:

BuClean loads and demands Windows WAIK which is already installed in %ProgramFiles% (default install) and all tools have been added into Windows\System32 for ease of use too.
When showing the program where my WAIK is it demands do I wish to use IA64 or AMD64 ? Doesn't matter what I chose clicking either choice makes it disappear and I'm left with a Splash screen which requires task manager to close it down !
With the WAIK choice buttons if I tell it where the imagex or oscdimg files are located ,the box closes leaving me with the Splash Screen. Haven't tried DLing the whole WAIK button as I know my install is fine.

I've been using these files so I know they are installed and working correctly. Log says very little but I've attached it .
Any help appreciated thxs.
Best regards Fairbod

Thank you very much for your bug report, We have fixed the issue and you have made a problem with changing manually some of the files to System32 folder.
Please consider re-turning them to their official folder under "%ProgramFiles%\\Windows AIK".
If the problem still presets then please consider PMing us reposting here, We will be happy to help you.

Thank you very much.

BuClean Team.

This post has been edited by Yzöwl: 06 February 2012 - 11:34 PM
Reason for edit: strikethrough added with following note. Problems should be kept within the public area.

[digital john]

@ekttob,
the new beta 5.1.0.0 still don't detect waik after u restart,
u still have to point out the location.
i wondering if u people have fixed this?
so many betas and still no fix...what's going on?
i'm running win 7 x64 sp1

[theKramer]

I installed BuClean Studio.
Tried all the WAIK versions, but it only worked with WAIK 3.1 (for W7-Sp1). I had to manually find the imagex and oscdiag files (Button on the bottom). So manual search works for me.

Next I clicked on the button to find the folder path and I selected my W7 DVD folder and opted to copy before changes ('No' option).

It seemed to copy successfully, but now it has been 30 mins and its still displaying status "Working..." in the Windows 7 Path and says "Everything is under control" below that.

Finally finished with a fatal error .

This folder was copied from my windows 7 installation disk, with no changes made prior to BuClean.

This post has been edited by theKramer: 07 February 2012 - 05:05 PM

[nice_guy75]

OMG, How come I didn't see this thread for so long. Just downloaded. I have seen some interesting feature listed here.

[Worf]

Hi.


I have download it and have used Windows 7 x64 with SP1 already intergrated. Now the problem i am having is intergrating the updates that came after SP1, i am getting an error with all the updates.

All the updates are for Windows 7 x64 and the error i am getting is:

'OOPs! The update pack is not compatible with the current Windows Arch/Platform'

These updates are ok with other programs.



Any ideas please?

Many Thanks

Worf.

[jbm]

Worf, on 08 February 2012 - 06:27 AM, said:

Hi.


I have download it and have used Windows 7 x64 with SP1 already intergrated. Now the problem i am having is intergrating the updates that came after SP1, i am getting an error with all the updates.

All the updates are for Windows 7 x64 and the error i am getting is:

'OOPs! The update pack is not compatible with the current Windows Arch/Platform'

These updates are ok with other programs.



Any ideas please?

Many Thanks

Worf.

I'm getting the same error

[theKramer]

Worf, on 08 February 2012 - 06:27 AM, said:

Now the problem i am having is intergrating the updates that came after SP1, i am getting an error with all the updates

Sorry to slightly hijack your post, but is there an application that can be used to download all windows updates, or do you have to search for them manually?

Thx

[theKramer]

theKramer, on 07 February 2012 - 04:56 PM, said:

I installed BuClean Studio.
Tried all the WAIK versions, but it only worked with WAIK 3.1 (for W7-Sp1). I had to manually find the imagex and oscdiag files (Button on the bottom). So manual search works for me.

Next I clicked on the button to find the folder path and I selected my W7 DVD folder and opted to copy before changes ('No' option).

It seemed to copy successfully, but now it has been 30 mins and its still displaying status "Working..." in the Windows 7 Path and says "Everything is under control" below that.

Finally finished with a fatal error .

This folder was copied from my windows 7 installation disk, with no changes made prior to BuClean.

There seems to be an issue with opting to copy the folder to another location and then modify that, than to modify the source folder, because this time I selected to modify the source folder without copying, and it is working ok, so far.....

[theKramer]

After 9 hours, its still on the "Removing Components" phase. It says its "Working on Features", and that 10 minutes have elapsed, but its been 9 hours since I went to bed and got up again this morning...

[Worf]

theKramer, on 08 February 2012 - 03:23 PM, said:

Sorry to slightly hijack your post, but is there an application that can be used to download all windows updates, or do you have to search for them manually?

Thx

Hi Kramer.

Here is the link for what you want. Windows Updates Downloader

Or you can download all the updates since SP1 from here Windows Hotfix repository These updates are from Solor who keeps this up to date with updates for x86 and x64 versions of windows. This will be your best option,


Regards

Worf

This post has been edited by Worf: 09 February 2012 - 02:02 AM

[theKramer]

Worf, on 09 February 2012 - 01:46 AM, said:

theKramer, on 08 February 2012 - 03:23 PM, said:

Sorry to slightly hijack your post, but is there an application that can be used to download all windows updates, or do you have to search for them manually?

Thx

Hi Kramer.

Here is the link for what you want. Windows Updates Downloader

Or you can download all the updates since SP1 from here Windows Hotfix repository These updates are from Solor who keeps this up to date with updates for x86 and x64 versions of windows. This will be your best option,


Regards

Worf

Cool. Thanks for that