dencorso Posted February 12, 2012 Share Posted February 12, 2012 IIRR, WDMSTUB is set to to load automatically with USBSTOR. If that's correct, WDMSTUB will be present only when some USB Mass Storage Device is connected, because those WDM drivers are loaded (and unloaded) dynamically. By modifying also USBCDC.INF we cater for the case when one USB serial device is connected, but no USB Mass Storage Device is also connected. When both are connected Windows takes care to prevent the double loading, if I'm not mistaken. That should keep us on the safe side. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted February 12, 2012 Share Posted February 12, 2012 IIRR, WDMSTUB is set to to load automatically with USBSTOR. If that's correct, WDMSTUB will be present only when some USB Mass Storage Device is connected, because those WDM drivers are loaded (and unloaded) dynamically. By modifying also USBCDC.INF we cater for the case when one USB serial device is connected, but no USB Mass Storage Device is also connected. When both are connected Windows takes care to prevent the double loading, if I'm not mistaken. That should keep us on the safe side.I trust you know more than me about the USB stuff. I will follow you lead. Just give me the instructions, and we are golden. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted March 7, 2012 Share Posted March 7, 2012 CharlesF Did you get your system up and running? Link to comment Share on other sites More sharing options...
CharlesF Posted April 11, 2012 Author Share Posted April 11, 2012 CharlesF Did you get your system up and running?No, still the same irritating bug with USB keys & HD.I have tried several changes in Usbehci.sys version but it doesn't help (for me at least). So, I stay with the version 5.00.2195.6882I need to find enough spare time for a whole reinstall.Thanks for asking PROBLEMCHYLD. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted April 16, 2012 Share Posted April 16, 2012 I need to find enough spare time for a whole reinstall.Thanks for asking PROBLEMCHYLD. You're welcome. Maybe someone will create a french version of the SP. Link to comment Share on other sites More sharing options...
farfigs11 Posted May 2, 2013 Share Posted May 2, 2013 I'm having a problem with my KT600-(Via 8237 chipset-athlonxp), not being able to use the front usb ports. It has two hubs in the back and two onboard pinouts for the front-which I'm only plugged into one right now. The back hubs (4 ports) work great. When I plug something in the front it ends up with "unknown device" in the usb section and is disabled. I read about using more than four ports here somewhere but can't remember where. I've tried SP3 and nusb3.3 independently and various Via usb chipset drivers to no avail. Can someone tell me what the problem is? Link to comment Share on other sites More sharing options...
LoneCrusader Posted May 2, 2013 Share Posted May 2, 2013 I'm having a problem with my KT600-(Via 8237 chipset-athlonxp), not being able to use the front usb ports. It has two hubs in the back and two onboard pinouts for the front-which I'm only plugged into one right now. The back hubs (4 ports) work great. When I plug something in the front it ends up with "unknown device" in the usb section and is disabled. I read about using more than four ports here somewhere but can't remember where. I've tried SP3 and nusb3.3 independently and various Via usb chipset drivers to no avail. Can someone tell me what the problem is?Sounds like a hardware issue, rather than a software issue since neither NUSB or USP3 are making any difference. Check in your BIOS settings and be sure that no USB devices settings are disabled.Also be sure that when you first connect a header to the onboard ports that you do not have anything plugged into the header. Do a reboot after connecting the header and before you attempt to connect anything to it. Link to comment Share on other sites More sharing options...
submix8c Posted May 2, 2013 Share Posted May 2, 2013 Properly connected? Found this (your board?) -http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=360&CategoryID=1&MenuID=24&LanID=0Scroll to "Pinouts"... Link to comment Share on other sites More sharing options...
dencorso Posted May 2, 2013 Share Posted May 2, 2013 Or refer to this pic (from the ASUS A7V600-X): Link to comment Share on other sites More sharing options...
farfigs11 Posted May 2, 2013 Share Posted May 2, 2013 Thanks everyone. I used the site from submix8c and found this diagram. My usb cable only has pins up to pin 8. According to this it looks like I need 9 and 10 which seems strange. I guess I need a different cable.usb.doc Link to comment Share on other sites More sharing options...
jaclaz Posted May 2, 2013 Share Posted May 2, 2013 Thanks everyone. I used the site from submix8c and found this diagram. My usb cable only has pins up to pin 8. According to this it looks like I need 9 and 10 which seems strange. I guess I need a different cable.No.Pin 9 is "KEY" i.e. it is not connected and used to identify the pins layout.http://pinouts.ru/Slots/USB_pinout.shtmlA single USB port has 4 (four) pins (just as a USB cable has four wires):USB Power +5VUSB Data -USB Data +USB Ground (0V)Those are 1/3/5/7 in the image you posted for first port (USB0) and Pins 2/4/6/8 for second port (USB1).See also (beware, the pin numbers are different, but the concept is the same):http://forums.anandtech.com/showthread.php?t=1581820jaclaz Link to comment Share on other sites More sharing options...
dencorso Posted May 2, 2013 Share Posted May 2, 2013 jaclaz is right (of course!): pin 9 is "KEY", being usually not connected (viz. "NC"), or, less commonly, grounded. Now, pin 10 is absent (= missing), so that one can immediately recognize which pin is pin 9 (because it's the only one that has no conterpart). Reversing "Data +" and "Data -" causes the port not to work, but usually causes no damage, so it can be corrected (this seems to me to be the problem with your machine). Now, reversing "Power +5V" and "Ground" can kill the motherboard, so take care with what you do, and don't do anything unless you're sure of what you're doing! Link to comment Share on other sites More sharing options...
submix8c Posted May 3, 2013 Share Posted May 3, 2013 (edited) OK, link I gave has somewhat confusing "acronyms" for Pinout. Dencorso's picture and Jaclaz' link is more "correct". Your Connector has only two items lacking (Pin#9/Pin#10) that are (probably) irrelevant (as Dencorso points out). A "full 10-pin" adapter has a "plug" in the Pin#9 position and an actual "Hole" in Pin#10 position to prevent EXACTLY what Dencorso is warning you about, somewhat akin to the "later" IDE and Floppy cable connectors. BEWARE if your Connector is one of the "oddball" reversed-connector-adapters (like some older Tyan MoBo's). Edited May 3, 2013 by submix8c Link to comment Share on other sites More sharing options...
farfigs11 Posted May 3, 2013 Share Posted May 3, 2013 I'm going to put the MB in other case or install XP and see if it works. right now it has trouble loading the drivers for anything I plug in--code 2 and happily assigns the unknown device from the sp3 inf. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now