Seagate 7200.12 similar to "СС" but not

MSFN Forum: Seagate 7200.12 similar to "СС" but not - MSFN Forum

Hard Drive and Removable Media issues Rules

If you have questions about Seagate 7200.11, do read the READ_ME_FIRST, then read the FGA. If your questions remain unanswered after reading those two stickies, then post. For all other Hard Drive and Removable Media issues, you may post right away.

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Seagate 7200.12 similar to "СС" but not Not shown in BIOS, but obediently does commands from Hterminal/Putty Rate Topic:

#1 dmitradze

Group: Members
Posts: 2
Joined: 08-February 12
OS:XP Pro x86
Country:

Posted 08 February 2012 - 05:03 AM

Hello.
I've got Seagate 7200.12, 500Gb, now it isn't shown in BIOS.
Read a lot about CC, very similar symptoms. In Victoria and so on.
But. In terminal and Putty (without any isolation or connecting read-write) it shows:

RST 0x10M
RW: Disk Ctlr Initialization Completed
(P) SATA Reset

No messages with CC. It reacts on CTRL+Z, spins well, does /U, /Z (runs and stops when commanding), clears Smart /N1 without errors, does V1 and V4.
But after doing m0,2,2,,,,,22 it shows sth like this:

Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = not supported
User Partition Format Successful - Elapsed Time 0 mins 00 secs 
Zone re-format was skipped.

After doing everything written about CC it is not recognized in BIOS anyway.
What to do with Max Certify Rewrite Retries = not supported?
Whan else can I do?

This post has been edited by dmitradze: 08 February 2012 - 05:04 AM

#2 jaclaz

The Finder

Group: Developers
Posts: 9,108
Joined: 23-July 04
OS:none specified
Country:

Posted 08 February 2012 - 05:27 AM

From what you write the only thing (among the "known ones") you haven't done is clearing the G-list, but I have NO idea if it could be of ANY use or if it will brick the disk for good :ph34r: