RIS trouble with Intel DesktopWorkstationServer sata driver - please h

[iamoris]

Hi all, Ive browsed every forum done every possible fix and I get nothing... Here is what ive done.

I have an HP Compaq 8200 elite sff pc that uses Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller.(ive used both intel and hp drivers)

I created my image with riprep, its running xp sp3.

my sif (located at i386\Templates\riprep.sif)

[unattended]

OemPreinstall = yes

OemPnPDriversPath = "\textmode;\\%SERVERNAME%\RemInst\%INSTALLPATH%\te xtmode;\i386"

FileSystem = LeaveAlone

ExtendOEMPartition = 0

TargetPath = \WINDOWS

OemSkipEula = yes

InstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE %"

LegacyNIC = 1

[MassStorageDrivers]

"Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller" = "OEM"

"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"

[OEMBootFiles]

iastor.Sys

iastor.cat

iastor.inf

iaahci.INF

iaahci.CAT

Txtsetup.oem

When I have the Mass Storage Drivers and OEM Bootfiles in the sif i get the txtsetup 21 error. When I remove it from the sif i get the "SETUP DID NOT FIND ANY HARD DISK DRIVES"

I tried the TXTSETUP.oem as it comes as well as editing in the exact driver under default and disk listed below(can provide FULL if needed):

[Disks]

disk1 = "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller", iaStor.sys, \

[Defaults]

scsi = iaAHCI_DesktopWorkstationServer

;################################################# ############################

[scsi]

; iaAHCI.inf

iaAHCI_ESB2 = "Intel® ESB2 SATA AHCI Controller"

iaAHCI_7RDH = "Intel® ICH7R/DH SATA AHCI Controller"

iaAHCI_7MMDH = "Intel® ICH7M/MDH SATA AHCI Controller"

iaAHCI_8RDHDO = "Intel® ICH8R/DH/DO SATA AHCI Controller"

iaAHCI_8MEM = "Intel® ICH8M-E/M SATA AHCI Controller"

iaAHCI_9RDODH = "Intel® ICH9R/DO/DH SATA AHCI Controller"

iaAHCI_9MEM = "Intel® ICH9M-E/M SATA AHCI Controller"

iaAHCI_10DDO = "Intel® ICH10D/DO SATA AHCI Controller"

iaAHCI_10R = "Intel® ICH10R SATA AHCI Controller"

iaAHCI_5 = "Intel® 5 Series 4 Port SATA AHCI Controller"

iaAHCI_5_1 = "Intel® 5 Series 6 Port SATA AHCI Controller"

iaAHCI_5_1_1 = "Intel® 5 Series/3400 Series SATA AHCI Controller"

iaAHCI_DesktopWorkstationServer = "Intel® Desktop/Workstation/Server Express Chipset SATA AHCI Controller"

iaAHCI_Mobile = "Intel® Mobile Express Chipset SATA AHCI Controller"

; iaStor.inf

iaStor_ESB2 = "Intel® ESB2 SATA RAID Controller"

iaStor_7RDH = "Intel® ICH7R/DH SATA RAID Controller"

iaStor_7MDH = "Intel® ICH7MDH SATA RAID Controller"

iaStor_DesktopWorkstationServer = "Intel® Desktop/Workstation/Server Express Chipset SATA RAID Controller"

iaStor_Mobile = "Intel® Mobile Express Chipset SATA RAID Controller"

;################################################# ############################

My folder structure is as follows at the moment:

i386

TEXTMODE

I have tried putting the textmode folder in

$oem$\textmode

$oem$\$1\textmode

NOTHING

At wits end here, I cannot get this going. Thank you in advance for any help. Please let me know anything I can provide you with.