Jump to content

multipartition usb stick not found in W7 Install


Weed

Recommended Posts

hello!

so i start better a new topic here :)

problem is the screenshot i attached :)

i have an Lexar Triton JumpDrive 32GB usb 3.0 stick with 3 Partitions, first one are just Boot Tools, second W7 and third for XP installation

first i tried to integrate diskmod 0.0.2.2 filterdriver with winkit but still no luck

dunno what "i" can do false when integratin the driver, i cant do anything other then just select the driver for integration and click on start, no problems on this step

the best soliution is how jaclaz said is to flip the stupid bit :) so its a fixed drive then i dont need a filterdriver

but the usb stick is i thing pretty "new" on the market, no tools available

the lexar bootit doesnt work with this one, nothing happens with "flip removable bit"

@ilko, sry i dont really understand what the http://flashboot.ru/iflash.html site is for :) my usb stick is anyway not on the list

this is taken from the tool chipgenius:

USB Device ID: VID = 05DC PID = A203

Serial Number: 0902000000408945498

Chip Vendor: Innostor

Chip Part-Number: IS902E-A1 - F/W 0.00.00.00

Flash ID Code: 2C680027 - Micron - 4CE/Dual Channel [sLC-8K] -> Total Capacity = 32GB

i hope for a hopeful help :)

post-9157-0-53190700-1339443572_thumb.jp

Link to comment
Share on other sites


the usb stick is i thing pretty "new" on the market, no tools available

http://www.upan.cc/tools/mass/Innostor/

http://www.upan.cc/tools/mass/Innostor/2012/IS902E_V203.html

http://ap.upan.cc/plus/download.php?open=0&aid=2083&cid=3

Download link is on bottom left. Password is IS0024. But can't see an option to flip the removable bit and this seems to be the newest version of this tool for this chip.

Warning- if you decide to play with such tools, it's on your responsibility, you can easily damage the stick. Most likely this will void warranty too.

@ilko, sry i dont really understand what the http://flashboot.ru/iflash.html site is for
To search for manufacturer tool by keywords, such as VID&PID, controller name, manufacturer etc. etc.

Google search also helps, e.g. search terms "IS902E site:flashboot.ru" without the quotes. Google translator is also your friend.

But sorry, that's what I could do, seems like back to square one. Hope somebody else gives you better answers.

Link to comment
Share on other sites

With some fantasy (and A LOT of reading between the lines :w00t: ) it is possible that the setting can only be reached by editing the SETUP.INI:

http://bbs.wuyou.com/archiver/?tid-209761.html

http://bbs.mydigit.cn/simple/?t358882.html

The setting:

FixedRemoval=0

should mean "removable" and

FixedRemoval=1 "fixed"

@Weed

DO NOT EVEN THINK to use this production tool, we simply have NO way to make sure of the accuracy of the above and in any case it does look like a "difficult" tool (some othe makers make "easier" tools.

jaclaz

Link to comment
Share on other sites

oooh god f*** it, it seems i havent read your 4 words, DO NOT EVEN THINK :(:)

i have edited the line in setup.ini and opened the program, with stick inside, made just a scan and read then i REALLY just want to close the program with ALT+F4 but "seems" like this was like click on the START button, my heart was beatin faster, my stick doesnt work anymore :((( it made an error "69" "Inquiry Fail!"; now if i plug my stick nothing happens, no light goes on, just NOTHING :((

i try to resend this stick,i have bought this 3-4 weeks ago

and if i get a new one

i will make

the same stupidity hahah **** it :)

Edited by Weed
Link to comment
Share on other sites

Hmmm. :wacko::w00t:

In case of need, this:

http://tagievara.narod.ru/pages/programs/flash/innostor.html

has a series of related tools (though there is not a specific recovery tool for your stick :()

It is possible that the JF700 tool may work, but REALLY, DO NOT EVEN THINK :ph34r: of using it (it may be a last, desperate effort, IF you cannot get an exchange).

jaclaz

Link to comment
Share on other sites

thanks ilko and jaclaz for tryin to help!

the stick is just "dead" now :(

i really never clicked on start, i dont know why this happend, anyway all in all i just can laugh :D

hmm iam coming back when i got an exchange from amazon, currently not in stock :(

then we'll see :)

i can see some words in big and written in bold here, hmmmm what can that mean, who knows.... :) :)

Edited by Weed
Link to comment
Share on other sites

so tomorrow i should already have my exchange in my mailbox! :)

iam still not sure what i should do, maybe i choose the savest way and not remove the bit :(

Link to comment
Share on other sites

so tomorrow i should already have my exchange in my mailbox! :)

iam still not sure what i should do, maybe i choose the savest way and not remove the bit :(

Yes :yes: , leave it alone, since the tool is seemingly a risky one (canoot say if "in itself" or "in your hands only " :w00t:;) )

You can always install a filter driver, as said in the main thread it has worked and works for lots of people, I see no reason why it shouldnt' work for you, though I have NO idea what is the "winkit" you mentioned at the time.

jaclaz

Link to comment
Share on other sites

but when i integrate the driver the OS is "screwed" because ALL usb sticks will shown as fixed drive or not? sure i can remove the driver afterwards but this is not so productive

hmm can u tell me how to integrate the driver in w7 and xp? wintoolkit is a program like rt7lite but with many features to managing the .wim files

on XP when i use nlite its enough just to point it to the .inf file?

Link to comment
Share on other sites

but when i integrate the driver the OS is "screwed" because ALL usb sticks will shown as fixed drive or not? sure i can remove the driver afterwards but this is not so productive

hmm can u tell me how to integrate the driver in w7 and xp? wintoolkit is a program like rt7lite but with many features to managing the .wim files

on XP when i use nlite its enough just to point it to the .inf file?

There are two "ways" (at least for cfadisk.sys and dummydisk.sys).

One is to install the driver for *all* USB sticks, the other one is to "hook" it to just a single device.

Some info is given here (and related links):

starting from around here:

page__st__46

The diskmod.sys has been tested on a "per device" basis: :

http://reboot.pro/9461/

http://reboot.pro/9461/#entry86619

All the instructions are for "manual" integration/install, cannot say how nlite or any other software would manage these :unsure: .

jaclaz

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...