Damnation

Install XP on USB3 stick

26 posts in this topic

Hi everyone! new here, looking for some help

So I've already got XP working on USB stick in USB2

I'm attempting to inject a textmode driver into my install for USB3 support

I've attempted to create a txtsetup.oem files for my USB3 controller (A Renesas USB3 Controller)

I've injected successfully but have not had much luck installing as it BSODs right after the part where you can select your RAID Driver

here is my attempt at a txtsetup.oem (not really sure how to do this, so it's sure to have mistakes)

TXTSETUP.OEM

[Disks]

disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

disk2="RENESAS USB3 HUB Installation Disk",\nusb3hub.inf,\

[Defaults]

SCSI=nusb3xhcx86

[sCSI]

nusb3xhcx86="nusb3xhc Driver x86"

nusb3xhcx64="nusb3xhc Driver x64"

nusb3hubx86="nusb3hub Driver x86"

nusb3hubx64="nusb3hub Driver x64"

[Files.scsi.nusb3xhcx86]

driver=disk1,nusb3xhc.sys,nusb3xhc

inf=disk1,nusb3xhc.inf

catalog=disk1,nusb3xhc.cat

[Files.scsi.nusb3xhcx64]

driver=disk1,nusb3xhc.sys,nusb3xhc

inf=disk1,nusb3xhc.inf

catalog=disk1,nusb3xhc.cat

[Files.scsi.nusb3hubx86]

driver=disk1,nusb3hub.sys,nusb3hub3

inf=disk1,nusb3hub.inf

catalog=disk1,nusb3hub.cat

[Files.scsi.nusb3hubx64]

driver=disk1,nusb3hub.sys,nusb3hub3

inf=disk1,nusb3hub.inf

catalog=disk1,nusb3hub.cat

[HardwareIds.scsi.nusb3xhcx86]

id="detected\nusb3xhc","nusb3xhc"

[HardwareIds.scsi.nusb3xhcx64]

id="detected\nusb3xhc","nusb3xhc"

[HardwareIds.scsi.nusb3hubx86]

id="detected\nusb3hub","nusb3hub"

[HardwareIds.scsi.nusb3hubx64]

id="detected\nusb3hub","nusb3hub"

[Config.nusb3xhc]

[Config.nusb3hub]

Any help would be appreciated!

0

Share this post


Link to post
Share on other sites

Try getting the relevant info from here:

http://www.911cd.net/forums//index.php?showtopic=23637

and try editing directly txtsetup.sif

:unsure:

In any case choose EITHER of x86 and x64 to simplify the procedure.

It'a lot of time I don't deal with txtsetup.oem file, but it seems to me like the issue is with HardwareIds.scsi.ID which is "invalid", compare with the above and with:

http://www.osronline.com/ddkx/install/txtsetup_1wmq.htm

http://www.osronline.com/ddkx/install/txtsetup_1qpe.htm

jaclaz

0

Share this post


Link to post
Share on other sites

Could you provide a link to the driver which you're trying to integrate?

0

Share this post


Link to post
Share on other sites
So I've already got XP working on USB stick in USB2

I'm attempting to inject a textmode driver into my install for USB3 support

Can you clarify:

Do you like to install XP from a USB device at Renesas controller to a internal hard disk?

Do you like to install XP to a USB device at Renesas controller?

Do youuse Renesas USB 3.0 Driver 2.1.28.1

http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19880

0

Share this post


Link to post
Share on other sites
So I've already got XP working on USB stick in USB2

I'm attempting to inject a textmode driver into my install for USB3 support

Can you clarify:

Do you like to install XP from a USB device at Renesas controller to a internal hard disk?

Do you like to install XP to a USB device at Renesas controller?

Do youuse Renesas USB 3.0 Driver 2.1.28.1

http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19880

From the USB onto a harddisk

Renesas USB 3.0 Driver 2.1.28.1

Thats the driver I got yes

0

Share this post


Link to post
Share on other sites

Do you like to install Windows XP 32 bit?

Renesas 2.1.28.1 support uPD720200 and uPD720200a.

Renesas 3.0.20 support uPD720201 and uPD720202.

Renesas 3.0.20 doesn't support a uPD720200a out of the box.

However rusb3xhc.sys does work nonetheless.

I prefer a edited Renesas 3.0.20 to support both cases:

txtsetup.sif

[WinntDirectories]
300 = OemDir\disk01

[SourceDisksFiles]
rusb3xhc.inf = 1,,,,,,,300,0,0
;rusb3xhc.cat = 1,,,,,,,300,0,0
rusb3xhc.sys = 1,,,,,,,300,0,0
rusb3xhc.sys = 1,,,,,,,4,0,0
rusb3co.dll = 1,,,,,,,300,0,0
rusb3hub.inf = 1,,,,,,,300,0,0
;rusb3hub.cat = 1,,,,,,,300,0,0
rusb3hub.sys = 1,,,,,,,300,0,0
rusb3hub.sys = 1,,,,,,,4,0,0

[HardwareIdsDatabase]
PCI\VEN_1033&DEV_0194 = "rusb3xhc"
PCI\VEN_1912&DEV_0014 = "rusb3xhc"
PCI\VEN_1912&DEV_0015 = "rusb3xhc"
RENESAS_USB3\ROOT_HUB30 ="rusb3hub"
RENESAS_USB3\CLASS_09 ="rusb3hub"

[BootBusExtenders.Load]
rusb3hub = rusb3hub.sys
rusb3xhc = rusb3xhc.sys

[BootBusExtenders]
rusb3xhc = "Renesas Electronics USB 3.0 Host Controller",files.none,rusb3xhc
rusb3hub = "Renesas Electronics USB 3.0 Root Hub",files.none,rusb3hub

hivesft.inf

HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\Inf;%SystemRoot%\OemDir\disk01"

rusb3xhc.inf

[RENESAS]
%PCI\VEN_1912&DEV_0014&REV_01.DeviceDesc% = RUSB3XHC, PCI\VEN_1033&DEV_0194

rusb3hub.inf

[RENESAS]
%RENESAS_USB3\ROOT_HUB30&VID_1912&PID_0014.DeviceDesc% = RUSB3HUB, RENESAS_USB3\ROOT_HUB30

winnt.sif

[Unattended]
DriverSigningPolicy=Ignore
NonDriverSigningPolicy=Ignore

And Renesas 2.1.28:

txtsetup.sif

[WinntDirectories]
300 = OemDir\disk01

[SourceDisksFiles]
nusb3xhc.inf = 1,,,,,,,300,0,0
nusb3xhc.cat = 1,,,,,,,300,0,0
nusb3xhc.sys = 1,,,,,,,300,0,0
nusb3xhc.sys = 1,,,,,,,4,0,0
nusb3co.dll = 1,,,,,,,300,0,0
nusb3hub.inf = 1,,,,,,,300,0,0
nusb3hub.cat = 1,,,,,,,300,0,0
nusb3hub.sys = 1,,,,,,,300,0,0
nusb3hub.sys = 1,,,,,,,4,0,0

[HardwareIdsDatabase]
PCI\VEN_1033&DEV_0194 = "nusb3xhc"
NUSB3\ROOT_HUB30 ="nusb3hub"
NUSB3\CLASS_09\CLASS_09 ="nusb3hub"

[BootBusExtenders.Load]
nusb3hub = nusb3hub.sys
nusb3xhc = nusb3xhc.sys

[BootBusExtenders]
nusb3xhc = "Renesas Electronics USB 3.0 Host Controller",files.none,nusb3xhc
nusb3hub = "Renesas Electronics USB 3.0 Root Hub",files.none,nusb3hub

hivesft.inf

HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\Inf;%SystemRoot%\OemDir\disk01"

0

Share this post


Link to post
Share on other sites

OK, hers my new TXTSETUP.OEM

[Disks]

disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

disk2="RENESAS USB3 HUB Installation Disk",\nusb3hub.inf,\

[Defaults]

SCSI=nusb3xhcx86

[sCSI]

nusb3xhcx86="Renesas USB3 Driver x86"

nusb3hubx86="Renesas USB3 HUB Driver x86"

[Files.SCSI.nusb3xhcx86]

driver=disk1,nusb3xhc.sys,nusb3xhc

inf=disk1,nusb3xhc.inf

catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3xhcx64]

driver=disk1,nusb3xhc.sys,nusb3xhc

inf=disk1,nusb3xhc.inf

catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hubx86]

driver=disk1,nusb3hub.sys,nusb3hub3

inf=disk1,nusb3hub.inf

catalog=disk1,nusb3hub.cat

[Files.SCSI.nusb3hubx64]

driver=disk1,nusb3hub.sys,nusb3hub3

inf=disk1,nusb3hub.inf

catalog=disk1,nusb3hub.cat

[HardwareIds.USB.nusb3xhcx86]

id="PCI\VEN_1033&DEV_0194&REV_03","Renesas Electronics USB 3.0 Host Controller"

id="PCI\VEN_1033&DEV_0194&REV_04","Renesas Electronics USB 3.0 Host Controller"

[HardwareIds.USB.nusb3xhcx64]

id="PCI\VEN_1033&DEV_0194&REV_03","Renesas Electronics USB 3.0 Host Controller"

id="PCI\VEN_1033&DEV_0194&REV_04","Renesas Electronics USB 3.0 Host Controller"

[HardwareIds.USB.nusb3hubx86]

id="NUSB3\ROOT_HUB30","Renesas Electronics USB 3.0 Root Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_00","Renesas Electronics USB Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_01","Renesas Electronics USB 2.0 Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_02","Renesas Electronics USB 2.0 Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_03","Renesas Electronics USB 3.0 Hub"

[HardwareIds.USB.nusb3hubx64]

id="NUSB3\ROOT_HUB30.DeviceDesc","Renesas Electronics USB 3.0 Root Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_00","Renesas Electronics USB Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_01","Renesas Electronics USB 2.0 Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_02","Renesas Electronics USB 2.0 Hub"

id="NUSB3\CLASS_09&SUBCLASS_00&PROT_03","Renesas Electronics USB 3.0 Hub"

[Config.nusb3xhc]

value = Interrupt Management\MessageSignaledInterruptProperties,MSISupported,1,0x00010001,1

value = "", ErrorControl, REG_DWORD, 1

value = "", Group, REG_SZ, "Base"

value = "", Start, REG_DWORD, 3

value = "", Type, REG_DWORD, 1

[Config.nusb3hub]

value = "EventMessageFile",0x00020000,"%11%\iologmsg.dll;%12%\nusb3hub.sys"

value = "TypesSupported",0x00010001,7

value = "", ErrorControl, REG_DWORD, 1

value = "", Group, REG_SZ, "Base"

value = "", Start, REG_DWORD, 3

value = "", Type, REG_DWORD, 1

Any problems with it?

It's made these changes to TXTSETUP.SIF

[sourceDisksFiles.x86]

nusb3co.dll = 1984,,,,,,,1984,0,0

nusb3co.dll = 1985,,,,,,,1985,0,0

nusb3hub.cat = 1984,,,,,,,1984,0,0

nusb3hub.cat = 1985,,,,,,,1985,0,0

nusb3hub.inf = 1984,,,,,,,1984,0,0

nusb3hub.inf = 1985,,,,,,,1985,0,0

nusb3hub.sys = 1,,,,,,4_,4,1,,,1,4

nusb3hub.sys = 1984,,,,,,,1984,0,0

nusb3hub.sys = 1985,,,,,,,1985,0,0

nusb3xhc.cat = 1984,,,,,,,1984,0,0

nusb3xhc.cat = 1985,,,,,,,1985,0,0

nusb3xhc.inf = 1984,,,,,,,1984,0,0

nusb3xhc.inf = 1985,,,,,,,1985,0,0

nusb3xhc.sys = 1,,,,,,4_,4,1,,,1,4

nusb3xhc.sys = 1984,,,,,,,1984,0,0

nusb3xhc.sys = 1985,,,,,,,1985,0,0

[sCSI.Load]

nusb3hub3 = nusb3hub.sys,4

nusb3xhc = nusb3xhc.sys,4

[fileflags]

nusb3hub.sys = 16

nusb3xhc.sys = 16

[sCSI]

nusb3hub3 = "Renesas USB3 HUB Driver x86"

nusb3xhc = "Renesas USB3 Driver x86"

0

Share this post


Link to post
Share on other sites
OK, hers my new TXTSETUP.OEM

Any problems with it?

Should work.

I doub't [Config] sections are required. x86 and x64 parts are mixed still.

It's
What's it?

Suggestion was to edit txtsetup.sif manually

made these changes to TXTSETUP.SIF

[sourceDisksFiles.x86]

nusb3xhc.sys = 1,,,,,,4_,4,1,,,1,4

nusb3xhc.sys = 1984,,,,,,,1984,0,0

nusb3xhc.sys = 1985,,,,,,,1985,0,0

Again: do you like to install Windows XP 32 bit?

Do you like to install Windows XP 64 bit?

Verify the file properties: does file \i386\nusb3xhc.sys matches the x86 version?

Try the result at real hardware.

0

Share this post


Link to post
Share on other sites

I think that there's a problem with x86 and x64 files. You should choose only one version to avoid complications.

0

Share this post


Link to post
Share on other sites

In any case choose EITHER of x86 and x64 to simplify the procedure.

.... x86 and x64 parts are mixed still.

....

Again: do you like to install Windows XP 32 bit?

Do you like to install Windows XP 64 bit?

I think that there's a problem with x86 and x64 files. You should choose only one version to avoid complications.

I would say that - surprisingly :unsure: - there is unanimous or at least 3/3 consensus on this part ;):whistle:

jaclaz

0

Share this post


Link to post
Share on other sites

So I attemped to follow your instructions and edited TXTSETUP.SIF

[WinntDirectories]
300 = USB3\Renesas

[SourceDisksFiles]
nusb3xhc.inf = 1,,,,,,,300,0,0
nusb3xhc.cat = 1,,,,,,,300,0,0
nusb3xhc.sys = 1,,,,,,,300,0,0
nusb3xhc.sys = 1,,,,,,,4,0,0
nusb3co.dll = 1,,,,,,,300,0,0
nusb3hub.inf = 1,,,,,,,300,0,0
nusb3hub.cat = 1,,,,,,,300,0,0
nusb3hub.sys = 1,,,,,,,300,0,0
nusb3hub.sys = 1,,,,,,,4,0,0

[HardwareIdsDatabase]
PCI\VEN_1033&DEV_0194 = "nusb3xhc"
NUSB3\ROOT_HUB30 ="nusb3hub"
NUSB3\CLASS_09\CLASS_09 ="nusb3hub"

[BootBusExtenders.Load]
nusb3hub = nusb3hub.sys
nusb3xhc = nusb3xhc.sys

[BootBusExtenders]
nusb3xhc = "Renesas Electronics USB 3.0 Host Controller",files.none,nusb3xhc
nusb3hub = "Renesas Electronics USB 3.0 Root Hub",files.none,nusb3hub

as well as hivesft.inf

HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\Inf;%SystemRoot%\USB3\Renesas"

I created USB3\Renesas Directories

but it says it cannot find nusb3hub.sys

0

Share this post


Link to post
Share on other sites

Could you give the URL to the drivers drivers you're trying to integrate? I mean the exact URL, not the name of it.

0

Share this post


Link to post
Share on other sites
I created USB3\Renesas Directories

but it says it cannot find nusb3hub.sys

A 32 bit windows XP setup search files at directory \I386\

Create a new installation temp space at hard disk. Copy files XP files to this directory.

Edit files and copy Renesas files to \I386\

Next build the USB stick again.

0

Share this post


Link to post
Share on other sites

OK, I used nlite to inject the USB3 Drivers, and then I edited TXTSETUP.SIF adding these manually



[BootBusExtenders.Load]
nusb3hub = nusb3hub.sys
nusb3xhc = nusb3xhc.sys

[BootBusExtenders]
nusb3xhc = "Renesas Electronics USB 3.0 Host Controller",files.none,nusb3xhc
nusb3hub = "Renesas Electronics USB 3.0 Root Hub",files.none,nusb3hub

Seems to be working now, it's seeing my USB

So one last question, does anyone know what to add to a TXTSETUP.OEM file so that it will add those lines to BootbusExtenders automatically?

heres my revised TXTSETUP.OEM



[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\
disk2="RENESAS USB3 HUB Installation Disk",\nusb3hub.inf,\


[Defaults]
SCSI=nusb3xhcx86


[SCSI]
nusb3xhcx86="Renesas USB3 Driver x86"

nusb3hubx86="Renesas USB3 HUB Driver x86"



[Files.SCSI.nusb3xhcx86]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hubx86]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat



[HardwareIds.SCSI.nusb3xhcx86]
id="PCI\VEN_1033&DEV_0194&REV_03","nusb3xhc"
id="PCI\VEN_1033&DEV_0194&REV_04","nusb3xhc"



[HardwareIds.SCSI.nusb3hubx86]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09&SUBCLASS_00&PROT_00","nusb3hub"
id="NUSB3\CLASS_09&SUBCLASS_00&PROT_01","nusb3hub"
id="NUSB3\CLASS_09&SUBCLASS_00&PROT_02","nusb3hub"
id="NUSB3\CLASS_09&SUBCLASS_00&PROT_03","nusb3hub"



[Config.nusb3xhc]

value = Interrupt Management\MessageSignaledInterruptProperties,MSISupported,1,0x00010001,1

value = "", ErrorControl, REG_DWORD, 1
value = "", Group, REG_SZ, "Boot Bus Extender"
value = "", Start, REG_DWORD, 0
value = "", Type, REG_DWORD, 1

[Config.nusb3hub]

value = "EventMessageFile",0x00020000,"%11%\iologmsg.dll;%12%\nusb3hub.sys"
value = "TypesSupported",0x00010001,7

value = "", ErrorControl, REG_DWORD, 1
value = "", Group, REG_SZ, "Boot Bus Extender"
value = "", Start, REG_DWORD, 0
value = "", Type, REG_DWORD, 1

just wondering what to add to it so it will add the lines to BootbusExtenders Automatically

Thanks for the help

0

Share this post


Link to post
Share on other sites

just wondering what to add to it so it will add the lines to BootbusExtenders Automatically

Thanks for the help

I don't think that you can add those keys "directly" through TXTSETUP.OEM, but you can most probably modify the invoked from it .inf file(s).

jaclaz

Edited by jaclaz
0

Share this post


Link to post
Share on other sites
OK, I used nlite to inject the USB3 Drivers, and then I edited TXTSETUP.SIF adding these manually

Did you include default USB3 drivers?

Did you used a txtsetup.oem?

If you used txtsetup.oem, don't edit txtsetup.sif.

just wondering what to add to it so it will add the lines to BootbusExtenders Automatically

Why do you like to do this? SCSI is working too.

0

Share this post


Link to post
Share on other sites

Did you include default USB3 drivers?

XP doesn't have default USB3 Drivers

Did you used a txtsetup.oem?

yes I did

If you used txtsetup.oem, don't edit txtsetup.sif.

but the TXTSETUP.OEM did not add the BootBusExtender entries, or can it work without them?

Why do you like to do this? SCSI is working too.

Because TXTSETUP.OEM doesn't add BootBusExtender entries

0

Share this post


Link to post
Share on other sites
XP doesn't have default USB3 Drivers

Let's clarify: did you include USB 3 drivers as provided by the manufacturer?

yes I did
That's a edited driver.
]but the TXTSETUP.OEM did not add the BootBusExtender entries, or can it work without them?

Yes, it can work

Try txtsetup.oem

[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

0

Share this post


Link to post
Share on other sites

OK I tried the txtseup.oem you provided.



[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

it did not add any additional lines to bootbusextenders or bootbusextenders.load

Let's clarify: did you include USB 3 drivers as provided by the manufacturer?

http://www.clevo.com.tw/en/e-services/download.asp

model is p150hm

the version 2.0.30.0 is not as recent as the one I got from intel

That's a edited driver.

but I'm not altering the .inf files at all

0

Share this post


Link to post
Share on other sites
it did not add any additional lines to bootbusextenders or bootbusextenders.load

Yes, this is the expected result. It's using SCSI section.

but I'm not altering the .inf files at all

Yes, however a added txtsetup.oem is a edited driver package.

This is nice too.

As for XP USB installation: there is no final answer.

Remember: approach is without OS manufacturer support.

There are different results at different used BIOS and used hardware.

Try it.

0

Share this post


Link to post
Share on other sites

You were right, the Bootbusextender entries aren't required, so thanks!

Ilve run into another problem now, says it cannot copy winvblk32.sys,

but I get the option at F6 to select it, so not sure what's going on

see "before I start XP Phase2"

0

Share this post


Link to post
Share on other sites

Hello everyone!

I'm on XP SP3 X86 with PCI Renesas USB3.0 (Drivers 2.1.36.0).

I want to install XP from USB3.0 key.

Just to know :

1) Why you don't add the file "nusb3co.dll" in "txtsetup.oem"?

2) I can only see "NUSB3\ROOT_HUB30" in my Device Manager. What is "NUSB3\CLASS_09"? Should I remove it from section [HardwareIds.SCSI.nusb3hub]

Thank you very much!

Chris

0

Share this post


Link to post
Share on other sites
1) Why you don't add the file "nusb3co.dll" in "txtsetup.oem"?

Yes, that's a good idea. Add nusb3co.dll[ too.

2) I can only see "NUSB3\ROOT_HUB30" in my Device Manager. What is "NUSB3\CLASS_09"? Should I remove it from section [HardwareIds.SCSI.nusb3hub]

NUSB3\CLASS_09 is another HardwareID from nusb3hub.inf. This HardwareID may be used at other machines.

This is not a conflict. Keep this HardwareID for future.

0

Share this post


Link to post
Share on other sites

Thank you for your fast response.

I will add this line : dll=disk1,nusb3co.dll

In what section should I add it ?

[Files.SCSI.nusb3xhc] or [Files.SCSI.nusb3hub] ?

0

Share this post


Link to post
Share on other sites
In what section should I add it ?

[Files.SCSI.nusb3xhc] or [Files.SCSI.nusb3hub] ?

The file nusb3xhc.inf does refer the filename nusb3co.dll.

Hence add nusb3co.dll to section [Files.SCSI.nusb3xhc]

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.