Damnation

Install XP on USB3 stick

26 posts in this topic

OK, I used nlite to inject the USB3 Drivers, and then I edited TXTSETUP.SIF adding these manually

Did you include default USB3 drivers?

Did you used a txtsetup.oem?

If you used txtsetup.oem, don't edit txtsetup.sif.

just wondering what to add to it so it will add the lines to BootbusExtenders Automatically

Why do you like to do this? SCSI is working too.

0

Share this post


Link to post
Share on other sites

Did you include default USB3 drivers?

XP doesn't have default USB3 Drivers

Did you used a txtsetup.oem?

yes I did

If you used txtsetup.oem, don't edit txtsetup.sif.

but the TXTSETUP.OEM did not add the BootBusExtender entries, or can it work without them?

Why do you like to do this? SCSI is working too.

Because TXTSETUP.OEM doesn't add BootBusExtender entries

0

Share this post


Link to post
Share on other sites
XP doesn't have default USB3 Drivers

Let's clarify: did you include USB 3 drivers as provided by the manufacturer?

yes I did
That's a edited driver.
]but the TXTSETUP.OEM did not add the BootBusExtender entries, or can it work without them?

Yes, it can work

Try txtsetup.oem

[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

0

Share this post


Link to post
Share on other sites

OK I tried the txtseup.oem you provided.



[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

it did not add any additional lines to bootbusextenders or bootbusextenders.load

Let's clarify: did you include USB 3 drivers as provided by the manufacturer?

http://www.clevo.com.tw/en/e-services/download.asp

model is p150hm

the version 2.0.30.0 is not as recent as the one I got from intel

That's a edited driver.

but I'm not altering the .inf files at all

0

Share this post


Link to post
Share on other sites
it did not add any additional lines to bootbusextenders or bootbusextenders.load

Yes, this is the expected result. It's using SCSI section.

but I'm not altering the .inf files at all

Yes, however a added txtsetup.oem is a edited driver package.

This is nice too.

As for XP USB installation: there is no final answer.

Remember: approach is without OS manufacturer support.

There are different results at different used BIOS and used hardware.

Try it.

0

Share this post


Link to post
Share on other sites

You were right, the Bootbusextender entries aren't required, so thanks!

Ilve run into another problem now, says it cannot copy winvblk32.sys,

but I get the option at F6 to select it, so not sure what's going on

see "before I start XP Phase2"

0

Share this post


Link to post
Share on other sites

Hello everyone!

I'm on XP SP3 X86 with PCI Renesas USB3.0 (Drivers 2.1.36.0).

I want to install XP from USB3.0 key.

Just to know :

1) Why you don't add the file "nusb3co.dll" in "txtsetup.oem"?

2) I can only see "NUSB3\ROOT_HUB30" in my Device Manager. What is "NUSB3\CLASS_09"? Should I remove it from section [HardwareIds.SCSI.nusb3hub]

Thank you very much!

Chris

0

Share this post


Link to post
Share on other sites
1) Why you don't add the file "nusb3co.dll" in "txtsetup.oem"?

Yes, that's a good idea. Add nusb3co.dll[ too.

2) I can only see "NUSB3\ROOT_HUB30" in my Device Manager. What is "NUSB3\CLASS_09"? Should I remove it from section [HardwareIds.SCSI.nusb3hub]

NUSB3\CLASS_09 is another HardwareID from nusb3hub.inf. This HardwareID may be used at other machines.

This is not a conflict. Keep this HardwareID for future.

0

Share this post


Link to post
Share on other sites

Thank you for your fast response.

I will add this line : dll=disk1,nusb3co.dll

In what section should I add it ?

[Files.SCSI.nusb3xhc] or [Files.SCSI.nusb3hub] ?

0

Share this post


Link to post
Share on other sites
In what section should I add it ?

[Files.SCSI.nusb3xhc] or [Files.SCSI.nusb3hub] ?

The file nusb3xhc.inf does refer the filename nusb3co.dll.

Hence add nusb3co.dll to section [Files.SCSI.nusb3xhc]

0

Share this post


Link to post
Share on other sites

Thank you very much for the explanations!

I will test intégration and install soon.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.