[timotheus]

Hi everyone,
I have developed a script to create a bootable USB-hosted SDHC to allow installation of both XP 32-bit and XP 64-bit on machines that I have at various locations (RMPartUSB and WinNTSetup2_x86 developers, thank you!).
However, there was one thing that really caused a nuisance, and that was the final xcopy to the SDHC.
I found that my usual xcopy /c /h /e /q /k /r /o /y didn't work, xcopy /h /e did.
I hope this helps anyone else who gets stuck with xcopy switches.

[jaclaz]

timotheus, on 29 September 2012 - 01:51 AM, said:

However, there was one thing that really caused a nuisance, and that was the final xcopy to the SDHC.
I found that my usual xcopy /c /h /e /q /k /r /o /y didn't work, xcopy /h /e did.
I hope this helps anyone else who gets stuck with xcopy switches.

The "standard" (mine) is however:

/i /s /e /r /v /k /f /c /h

http://www.msfn.org/...post__p__821109

jaclaz, on 23 December 2008 - 06:31 AM, said:

About XCOPY,
Nick Rage:
http://www.duxcw.com...pyhd/cpyhd2.htm
is to be credited for the:
http://www.msfn.org/...opic=24650&st=9

I SERVe Kentucky Fried Chicken Hot!

Most probably the issue you had was due to the missing /h switch, that will leave behing any "hidden" file , and the /o may also cause issues (if the target is NTFS).

jaclaz