MSFN Forum: Formatted Internal SATA drive not seen by USB --> SATA converter - MSFN Forum

Jump to content


Hard Drive and Removable Media issues Rules

If you have questions about Seagate 7200.11, do read the READ_ME_FIRST, then read the FGA. If your questions remain unanswered after reading those two stickies, then post. For all other Hard Drive and Removable Media issues, you may post right away.
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Formatted Internal SATA drive not seen by USB --> SATA converter Rate Topic: -----

#1 User is offline   gamefixer 

  • Newbie
  • Group: Members
  • Posts: 10
  • Joined: 18-September 12
  • OS:Windows 7 x64
  • Country: Country Flag

Posted 02 October 2012 - 03:19 PM

So I'm working on consolidating some data on several small drives to one 2 gig drive. One of the machines that I need to pull the data from has to stay on so I cant turn it off and plug this drive into a SATA port on the mother board. My plan was to use a USB --> SATA adapter.... Sounds simple enough.

Well, I end up filling about 40% of the drive with machine #1 (connected to the system's mobo). I powered that machine down, connected the drive to the USB adapter, plug the USB into the machine I cant turn off (machine #2) and.... NOTHING! I go to Device Manager --> Disk Management to find that the drive is there but in RAW format not NTFS???? So I put the drive back in the other computer (computer #1) and its fine.

Is there something about large drives and these USB things that I'm not aware of? I've used this thing for years with 2.5 and 3.5" PATA drives and its never done this.

The drive in question is a Seagate ST2000D.

Thanks for the help or any info.


#2 User is offline   Tripredacus 

  • K-Mart-ian Legend
  • Group: Super Moderator
  • Posts: 8,665
  • Joined: 28-April 06
  • OS:Server 2012
  • Country: Country Flag

Posted 02 October 2012 - 04:41 PM

What is the OS on the source PC and the destination PC?

Just to get things clear, tell me if this is incorrect:
- You plugged the HDD into the SATA port of the source computer, copied files, disconnected it after powering it down, connected the HDD to the adapter, then plugged it into the destination computer.

What is the make/model of the adapter? Is it USB powered or have its own brick?

#3 User is offline   gamefixer 

  • Newbie
  • Group: Members
  • Posts: 10
  • Joined: 18-September 12
  • OS:Windows 7 x64
  • Country: Country Flag

Posted 02 October 2012 - 04:46 PM

Source and destination are Win7 Enterprise. One might be 32 and the other 64 but I wouldn't think that would matter.

The connection scenario is as you described. I dont know the make model of the adapter but will check tomorrow and it has its own brick.

#4 User is offline   jaclaz 

  • The Finder
  • Group: Developers
  • Posts: 11,408
  • Joined: 23-July 04
  • OS:none specified
  • Country: Country Flag

Posted 03 October 2012 - 04:19 AM

View Postgamefixer, on 02 October 2012 - 03:19 PM, said:

Is there something about large drives and these USB things that I'm not aware of? I've used this thing for years with 2.5 and 3.5" PATA drives and its never done this.

Yes. (meaning there is).
Some controllers in the USB to SATA thingy will have a limit, which typically can be (from memory):
  • 137 Gb (the LBA 48 limit) <- for very old adapters
  • 500 Gb
  • 750 Gb
  • 1 Tb


As an example see this one:
http://www.rocketfis...s/RF-AHD35.html
which is said to be "for max 750 Gb".

jaclaz

#5 User is offline   gamefixer 

  • Newbie
  • Group: Members
  • Posts: 10
  • Joined: 18-September 12
  • OS:Windows 7 x64
  • Country: Country Flag

Posted 03 October 2012 - 04:54 AM

Good to know, thanks Jaclaz.

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

2 User(s) are reading this topic
0 members, 2 guests, 0 anonymous users



All trademarks mentioned on this page are the property of their respective owners
Copyright © 2001 - 2013 msfn.org
Privacy Policy