Lack of AHCI on MOBO
Posted 11 October 2012 - 02:42 AM
Posted 11 October 2012 - 03:30 AM
Posted 02 November 2012 - 11:17 PM
It DOES support AHCI!
As far as I know there were some legal issues with nVIDIA using the "AHCI" name in its BIOS (correct me if I'm wrong) so you can't enable it in a "normal" way. What you should do is to enable RAID. Enabling RAID equals enabling AHCI. And yes, you can use even one disk in the RAID mode on this board.
Posted 05 November 2012 - 01:44 PM
Posted 25 November 2012 - 03:18 PM
Have you tried running it in plain IDE mode? I have an SSD sata 3 in my nephews system and it runs just fine after a year. no issues other than running at sata II speeds. The difference between sata II and sata III is negligible compared to HDD to SSD.
Most all SSDs have a garbage collection mode to self TRIM themselves.
Posted 29 November 2012 - 07:11 AM
There is a RAID option on that mainboard which allows to use just a single disk. I don't remember its name unfortunately but you should experiment with all of the available ones (there aren't many of them anyway). Just make sure that all the data is backed up because the disk will have to be repartitioned and reformatted after changing those RAID settings.