Frontpage
Forums
Tutorials
Members
Calendar
Subscription
Donate
Links
Contact 
Help
problem with win2000 pro setup
i have a problem with win2000 pro setup
actually i have my hdd on the on-board promiso controller
i have a sata ibm 80gb hdd
i load first the scsi raid driver pressing f6
then i choose the driver from the disk
everything ok until then
setup stops when it says "starting win2000 setup"
any suggestions?
Page 1 of 1
win2k prob
Rate Topic:
Back to top
#2
- You think you know so much.
-
- Group: Members
- Posts: 351
- Joined: 06-June 03
Posted 04 March 2004 - 12:13 AM
Does it continue to show the same screen, or does it turn black?
#3
Posted 04 March 2004 - 02:44 AM
Load the drivers befor you hook the drives to the
promise controller, meaning
boot the PC to the OS, install the promise controller drivers.
Then shut down & then switch the drive to the promise controller !
then reboot
promise controller, meaning
boot the PC to the OS, install the promise controller drivers.
Then shut down & then switch the drive to the promise controller !
then reboot
#4
Posted 04 March 2004 - 11:39 AM
after it stops at "setup is starting windows" a blue scree come out
i can't choose from bios to load from the promise
thanks
i can't choose from bios to load from the promise
thanks
#5
Posted 05 March 2004 - 02:24 AM
Hello,
Have you a drive (HD or other) connected on the IDE 1 or ID2 ?
Medley
Have you a drive (HD or other) connected on the IDE 1 or ID2 ?
Medley
Share this topic:
Page 1 of 1