I've got a Canon MP450 that I use occasionally with a laptop running a customized
version of 98SE. If I don't use this MFP for ten days or longer, I print a few test
sheets that have fonts in many different colors. It's the only way to keep the
cartridges from drying out and becoming useless.
The sheets come out completely clean. The problem is the fonts are frequently
fractured or misaligned. It's not consistent. If you print a few paragraphs, not all
the fonts come out misaligned. A few lines look good, followed by several lines
where the fonts are slightly slanted or fractured.
I've tried the "Auto Head Align" from the maintenance screen on the MP450, and
the "Print Head Alignment" from the Canon software. The results are the same.
If you're familiar with the procedure, there are rows of rectangular patterns. You
select the pattern where the spaces between the stripes are almost invisible. The
middle row is "0" going down to -5 and up to +5. I suppose the print head would
be considered "perfect" if the patterns selected were all in the middle or "0."
Here are the results from the alignment procedure I just performed:
A = 0
B = 0
C = -2
D = +1
E = -2
F = 0
G = +1
H = +2
I = -1
J = 0
K = +1
L = 0
The cartridges are factory, not aftermarket. I've repaired and constructed many different
kinds of mechanical and electronic devices, but I don't know much about these MFPs. It
seems like the print head is defective. Maybe there is something I could try that is not in
the Canon pdf manual. Tinkering with the numbers might be worth a try. I thought about
setting all the numbers to zero, just to establish a new baseline. Then I could gradually
go positve or negative until the fonts appear normal. Probably a waste of time.
Page 1 of 1
Canon Print Head Alignment Problem
- ← 16GB installed, only 12GB usable in Win7 x64 Ultimate
- Hardware Hangout
- different behavior of Realtek HD Audio manager →
Share this topic:
Page 1 of 1