[Damnation]

I'm making some USB 3.0 txtsetup.oem files so that you can add USB 3.0 support to XP textmodem as well as integrate with nlite.
(As it is nowm if you install windows XP on a USB stick through a USB 3.0 port, you will get a 0x7b BSOD)

ASMEDIA

[Disks]
disk1="ASMEDIA USB3 Installation Disk",\asmtxhci.inf,\

[Defaults]
SCSI=asmtxhci

[SCSI]
asmtxhci="ASMEDIA USB3 Controller Driver"
asmthub3="ASMEDIA USB3 HUB Driver"

[Files.SCSI.asmtxhci]
driver=disk1,asmtxhci.sys,asmtxhci
inf=disk1,asmtxhci.inf
catalog=disk1,asmtxhci.cat

[Files.SCSI.asmthub3]
driver=disk1,asmthub3.sys,asmthub3
inf=disk1,asmthub3.inf
catalog=disk1,asmthub3.cat

[HardwareIds.SCSI.asmtxhci]
id="PCI\VEN_1B21&DEV_1040","asmtxhci"
id="PCI\VEN_1B21&DEV_1041","asmtxhci"
id="PCI\VEN_1B21&DEV_1042","asmtxhci"
id="PCI\VEN_1B21&DEV_1142","asmtxhci"


[HardwareIds.SCSI.asmthub3]
id="USB\ASMEDIAUSBD_Hub","asmthub3"

ETRON

[Disks]
disk1="ETRON USB3 Installation Disk",\EtronX~1.inf,\

[Defaults]
SCSI=EtronXHCI

[SCSI]
EtronXHCI="ETRON USB3 Controller Driver"
EtronHUB3="ETRON USB3 HUB Driver"
EtronSTOR="ETRON USB3 STOR Driver"

[Files.SCSI.EtronXHCI]
driver=disk1,EtronX~1.SYS,EtronXHCI
inf=disk1,EtronX~1.INF
catalog=disk1,etronx~1.cat

[Files.SCSI.EtronHUB3]
driver=disk1,EtronH~1.SYS,EtronHUB3
inf=disk1,EtronX~1.INF
catalog=disk1,etronx~1.cat

[Files.SCSI.EtronSTOR]
driver=disk1,EtronS~1.SYS,EtronSTOR
inf=disk1,EtronX~1.INF
catalog=disk1,etronx~1.cat

[HardwareIds.SCSI.EtronXHCI]
id="PCI\VEN_1B6F&DEV_7023","EtronXHCI"
id="PCI\VEN_1B6F&DEV_7052","EtronXHCI"

[HardwareIds.SCSI.EtronSTOR]
id="ENUSB\Class_08&SubClass_06","EtronSTOR"


[HardwareIds.SCSI.EtronHUB3]
id="ENUSB3\ROOT_HUB30","EtronHUB3"
id="ENUSB3\EXT_HUB10","EtronHUB3"
id="ENUSB3\EXT_HUB20","EtronHUB3"
id="ENUSB3\EXT_HUB30","EtronHUB3"

NEC (uPD720200 & uPD720200a)

[Disks]
disk1="RENESAS USB3 Installation Disk",\nusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.nusb3xhc]
driver=disk1,nusb3xhc.sys,nusb3xhc
inf=disk1,nusb3xhc.inf
catalog=disk1,nusb3xhc.cat

[Files.SCSI.nusb3hub]
driver=disk1,nusb3hub.sys,nusb3hub
inf=disk1,nusb3hub.inf
catalog=disk1,nusb3hub.cat

[HardwareIds.SCSI.nusb3xhc]
id="PCI\VEN_1033&DEV_0194","nusb3xhc"

[HardwareIds.SCSI.nusb3hub]
id="NUSB3\ROOT_HUB30","nusb3hub"
id="NUSB3\CLASS_09","nusb3hub"

NEC (uPD720201 & uPD720202)

[Disks]
disk1="RENESAS USB3 Installation Disk",\rusb3xhc.inf,\

[Defaults]
SCSI=nusb3xhc

[SCSI]
nusb3xhc="Renesas USB3 Controller Driver"
nusb3hub="Renesas USB3 HUB Driver"

[Files.SCSI.rusb3xhc]
driver=disk1,rusb3xhc.sys,rusb3xhc
inf=disk1,rusb3xhc.inf
catalog=disk1,rusb3xhc.cat

[Files.SCSI.rusb3hub]
driver=disk1,rusb3hub.sys,rusb3hub
inf=disk1,rusb3hub.inf
catalog=disk1,rusb3hub.cat

[HardwareIds.SCSI.rusb3xhc]
id="PCI\VEN_1912&DEV_0014&REV_01","rusb3xhc"
id="PCI\VEN_1912&DEV_0014&REV_02","rusb3xhc"
id="PCI\VEN_1912&DEV_0014&REV_03","rusb3xhc"
id="PCI\VEN_1912&DEV_0015&REV_01","rusb3xhc"
id="PCI\VEN_1912&DEV_0015&REV_02","rusb3xhc"

[HardwareIds.SCSI.rusb3hub]
id="RENESAS_USB3\ROOT_HUB30&VID_1912&PID_0014","rusb3hub"
id="RENESAS_USB3\ROOT_HUB30&VID_1912&PID_0015","rusb3hub"
id="RENESAS_USB3\CLASS_09&SUBCLASS_00&PROT_00","rusb3hub"
id="RENESAS_USB3\CLASS_09&SUBCLASS_00&PROT_01","rusb3hub"
id="RENESAS_USB3\CLASS_09&SUBCLASS_00&PROT_02","rusb3hub"
id="RENESAS_USB3\CLASS_09&SUBCLASS_00&PROT_03","rusb3hub"
id="RUSB3HUB,RENESAS_USB3\CLASS_09&SUBCLASS_01","rusb3hub"

TEXAS INSTRUMENTS

[Disks]
disk1="TEXAS USB3 Installation Disk",\tixhci.inf,\

[Defaults]
SCSI=tixhci

[SCSI]
tixhci="TEXAS USB3 Controller Driver"
tihub3="TEXAS USB3 HUB Driver"

[Files.SCSI.tixhci]
driver=disk1,tixhci.sys,tixhci
inf=disk1,tixhci.inf
catalog=disk1,tixhci.cat

[Files.SCSI.tihub3]
driver=disk1,tihub3.sys,tihub3
inf=disk1,tihub3.inf
catalog=disk1,tihub3.cat

[HardwareIds.SCSI.tixhci]
id="PCI\VEN_104C&DEV_8241","tixhci"


[HardwareIds.SCSI.tihub3]
id="USB\TIUSBD_Hub","tihub3"

The VIA and Fresco-Logic controllers are dependent on the Kernel Mode Driver Framework, and thus-far have proven very difficult to get working, so they won't be included for now.

Unless someone is willing to help me with the VIS/Fresco problem.

This post has been edited by Damnation: 28 January 2013 - 07:19 AM

[jaclaz]

Damnation, on 28 January 2013 - 07:17 AM, said:

The VIA and Fresco-Logic controllers are dependent on the Kernel Mode Driver Framework, and thus-far have proven very difficult to get working, so they won't be included for now.

Unless someone is willing to help me with the VIS/Fresco problem.

Cannot the thingy cdob posted here (as .inf):
http://www.911cd.net...showtopic=24566
for VIA be "converted" to txtsetup.oem format?


jaclaz

[cdob]

jaclaz, on 28 January 2013 - 07:52 AM, said:

Cannot the thingy cdob posted here (as .inf):

This BartPE example is textmode only. There is no gui mode reboot.

There is another Kernel Mode Driver Framework issue after first reboot, hence at gui mode.
No, I don't have a txtsetup.oem only solution.