Jump to content

Onboard LAN powered when PC is shutdown


Recommended Posts

Hey guys. Any clue why my LAN would stay powered when the PC is off? Would it have something to do with Windows 7? In device manager I have unticked "Allow this device to wake up computer"

Basically when I shut it down, my switch LED turns off for about 2 seconds, then comes on again. If I would kill the PC power (turn PSU off), switch LED would turn off, and will stay off until I start the computer again.

Link to comment
Share on other sites


That is "by design".

Any ATX powered PC (anything built in the last - say - 15 years) would normally behave like that, some BIOSes may :unsure: allow to NOT power the network card, but normally it is powered when the PC is "off".

Basically an ATX power supply is like having TWO power supplies inside, the "main one" is switched on when you switch the PC ON, the second (very small power one) will always be on as long as it is connected to mains (some but not all have a mechanical switch on the back that allows switching it "really" off).

http://en.wikipedia.org/wiki/ATX

http://wiki.answers.com/Q/What_are_the_differences_between_AT_and_ATX_power_supply

The network card is normally powered even when the PC is off, to allow the wake on lan, as well most BIOS allow to switch the PC on from a press of a key on the keyboard or a mouse click, so these are also powered.

jaclaz

Link to comment
Share on other sites

Ah, I had a feeling this would be the case. My (very old) PC, laptop when plugged in (ethernet cable) and NAS (synology) not keeping the LED on on my switch made me think otherwise.

Any chance to disable that, just an FMI.

Edited by Messerschmitt
Link to comment
Share on other sites

There could be wake-on-lan options in the network card driver, or in the bios.

Sometimes they get creative with the descriptions, like PME (Power Management Events) or "deep sleep".

Or there is always the wall switch...

Link to comment
Share on other sites

...and - as always - there can be n shades of gray instead of Black/White On/Off :w00t: :

http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_F78F568BBB1BC1A0E030030ABD625AEA&isLegacy=true&DoNotRedirect=y

Every BIOS has it's more or less clear "wording", this is a good overview on WOL (Wake on Lan):

http://www.i-mentalist.com/support/faq/wol/

where you can find more possible "keywords".

jaclaz

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...