[hal8000]

I am having problems integrating SATA drivers for my Gigabyte Motherboard GA-P55A-UD3
Motherboard has both JM Micro SATA ports (not used) and 6 SATA 2 ports designated SATA2_0 to SATA2_5,
which are supported by the P55 chipset


In BIOS, Integrated Peripherals screen, I have option to set PCH SATA control mode as IDE, RAID(XHD) or AHCI
If I choose AHCI then Windows XP will fail to load with STOP 7B message


I currently have dual boot Windows 7 / Windows XP and have used Nlite from windows 7 to slipstream my XP Pro (32bit)
CD and have integrated SP3 and tried various SATA drivers but still get the STOP 7B message when installing from the Nlite CD

Device manager hardware ID's are below (from Windows XP):

Under IDE ATA/ATAPI controller:
Name:
Intel ® 5 series/3400 Series Chipset Family 2 port serial ATA Storage controller - 3B26
Hardware ID:
PCI\VEN_8086&DEV_3B26&SUBSYS_B0021458&REV_06
PCI\VEN_8086&DEV_3B26&SUBSYS_B0021458
PCI\VEN_8086&DEV_3B26&CC_010185
PCI\VEN_8086&DEV_3B26&CC_0101

Name:
Intel ® 5 series/3400 Series Chipset Family 4 port serial ATA Storage controller - 3B20
Hardware ID's
PCI\VEN_8086&DEV_3B20&SUBSYS_B0021458&REV_06
PCI\VEN_8086&DEV_3B20&SUBSYS_B0021458
PCI\VEN_8086&DEV_3B20&CC_01018F
PCI\VEN_8086&DEV_3B20&CC_0101


I have tried integrating iaAHCI.inf from the 32bit Intel RST AHCI & RAID driver v11.2.0.1006 WHQL
but if setting the SATA controller in BIOs to ACHI my Nlited XP install disk starts to load windows XP
but after first reboot fails with the STOP 7B message.

Drives are connected as follows:
1 500G SATA II drive connected to SATA2_0 (This is my Windows XP and Win7 install)
1 LG DVD/CD connected to SATA2_1
1 500G SATA II drive connected to SATA2_2 (all partitions linux and freeBSD)

There is no linux boot loader to worry about at the moment, boot loader is Windows 7 BCD
controlling boot of both Windows 7 and XP

Thanks in advance if anyone can help.

This post has been edited by hal8000: 01 March 2013 - 05:54 PM

[bphlpt]

I believe that if you created your XP install disc using nLite while on a Windows7 host OS that might be your problem. That is known to cause problems which do not show up until you try to install XP. You have to create the XP install disc with nLite while running XP as your host OS. Running XP in a VM should work.

Cheers and Regards

[Ponch]

Integrating SP3 under Win7 will get you problems entering the product key. But befire you retry under XP or a VM, you need to look at your main problem.
What do you mean by "after 1st reboot", is it after partition is chosed and XP files are finished being copied to the HDD or did you mean "1st boot" ?

[hal8000]

Ponch, on 02 March 2013 - 04:58 AM, said:

Integrating SP3 under Win7 will get you problems entering the product key. But befire you retry under XP or a VM, you need to look at your main problem.
What do you mean by "after 1st reboot", is it after partition is chosed and XP files are finished being copied to the HDD or did you mean "1st boot" ?

Thanks both of you for replies.

I can confirm that there has been no problem with the product key (even though nLite disc was mastered on windows 7). I even have a successfull install
of Windows XP using the disc, however BIOS was set to IDE mode for SATA drive.

@Ponch
If BIOS is set to AHCI then XP installation starts and files are copied onto the HDD. When XP reboots this is when I get the STOP 7B message.
My SATA controller is Intel Series5/3400 I'm pretty sure I am using wrong driver or some other mistake.
Thanks for help so far.

[submix8c]

Did you do/integrate the Text-Mode Driver TXTSETUP.OEM?

[Fernando 1]

@ hal8000:

Why did you start a new thread with your problem? >Here< is a special thread regarding the integration of the Intel textmode drivers into a Windows XP CD.

[hal8000]

I wanted my post as a reply to your thread but made a mess and cannot find a way to move my post now,
if you can move my thread, please do so.

I have integrated text drivers from a subfolder which contains txtsetup.oem Not sure if that
I downloaded the file in step 1A
http://win-lite.de/b....1006%20WHQL.7z

http://www.msfn.org/...d-raid-drivers/

extracted it in c:\ root and integrated by clicking on iaAHCI.inf in the extracted
32bit Intel RST AHCI & RAID driver v11.2.0.1006 WHQL folder

Not sure if I need to enable more than 1 driver as in Step 2 of Fernandos guide.
Thanks for help so far.

[Fernando 1]

hal8000, on 02 March 2013 - 04:32 PM, said:

extracted it in c:\ root and integrated by clicking on iaAHCI.inf in the extracted
32bit Intel RST AHCI & RAID driver v11.2.0.1006 WHQL folder

That was a good choice, but which of the listed Intel SATA Controllers did you highlight, when you got the textmode driver popup window with the list of all available Intel SATA Controllers?
The correct one would have been the "Intel® 5 Series/3400 Series SATA AHCI Controller".

Quote

Not sure if I need to enable more than 1 driver as in Step 2 of Fernandos guide.

No, you should not integrate more than 1 Intel textmode driver and it would be the best option to check just the correct Intel SATA AHCI Controller (5-Series/3400 Series).
Another tip: Before you are going to install Windows XP, you should unplug the second HDD.

[hal8000]

I've tried re-installing XP again with BIOS set to AHCI and second SATA drive disconnected.
Install proceeds recognizing hard drive and copies file from nLite CD to HDD, however after
the reboot installation halts with STOP 0x000007B

I have even took an old floppy drive and made a copy of the SATA drivers on floppy disk, tried
with original XP Pro disk to Install XPand same thing happens, after first reboot I have STOP 7B message.


Previously I did have XP Pro 64bit working with SATA drivers but some of my programmes dont
work with 64bit which is why I am using 32bit.

To recap motherboard is Gigabyte GA-P55A-UD3 with 6 SATA ports, 2 JMmicro ports (not using and disabled in BIOS)

I have been through nLite several times and have a strong feeling I have integrated more than
one driver.

Browsing through my Nlite folder I see a folder called C:\Nlite\I386\NLDRV

The NLDRV contains subfolders 001, 002, 003, 004 The contents of 001, 002 and 004 contain
IAAHCI.CA_
IAAHCI.IN_
IASTOR.CA_
IASTOR.IN_
IASTOR.SY_

At a guess, when extracted these will become IAAHCI.INF, IAAHCI,CAT etc

I am willing to delete my Nlite folder and start again froms scratch unless there is a way I can remove
the drivers I already integrated.
Thanks for all your help Fernando

[Sp0iLedBrAt]

Quote

I am willing to delete my Nlite folder and start again froms scratch unless there is a way I can remove the drivers I already integrated.

Unfortunately, you will need to start from scratch: new source (copy of XP) on your PC and more work with nLite. However, the good thing is you can use the presets which nLite loads from the previous session.

Quote

The contents of 001, 002 and 004 contain...

Something is not right here. One folder is enough; why three?

It's like Fernando says: when you get to the stage where you integrate drivers, click to select a Single Driver. A popup window appears; select Textmode (TXT) and point to your AHCI driver. When presented with several options, select "Intel® 5 Series/3400 Series SATA AHCI Controller" and click OK.

Cheers