• Announcements

    • xper

      MSFN Sponsorship and AdBlockers!   07/10/2016

      Dear members, MSFN is made available via subscriptions, donations and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, become a site sponsor and ads will be disabled automatically and by subscribing you get other sponsor benefits.
rubby8892

Computer will not boot

26 posts in this topic

I have a gateway laptop with windows vista and it will not start up. There are multiple senerios depending on what I do at start up.

If I try safe mode it will not go through all of the files before freezing.

If I just let it go it will come to

Checking file system on C:

The type of file system is NTFS.

Volume label is OS.

A disk check has been scheduled

If I let that go it will fail. If I stop it

Disk Checking has been cancelled.

Windows has finished checking the disk

...

Checking file system on D:

The type of file system if NTFS.

Volume label is DATA.

One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.

Windows will now check the disk.

Corrupt master file table. Windows will attempt to recover master file table from disk.

Then is never moves on from there.

I do not have any of the original software to load anything. What can I do.

Thanks

Rose

0

Share this post


Link to post
Share on other sites

Those are symptoms of a corrupted filesystem.

You do need to boot to an "alternate" OS (such as an install CD/DVD) and check the filesystem.

It is possible that the issue is just with the filesystem, but it could be a (more serious) hardware issue (failing hard disk).

The issue here is that if the "built in" CHKDSK is not working properly to diagnose (and hopefully fix) the filesystem problem, it may mean that one or more of the needed Vista :ph34r: system files is corrupted/unindexed (and not recoverable/lost).

This more or less is the meaning of the error about the MFT, depending on a number of factors it may be possible to recover "everything as before" or not.

Do you remember if that thingy had/has a "recovery partition"?

Or post the exact model of the laptop, it may be possible to find out this.

Gateways shipped with Vista :ph34r: normally have a "recoery systems", that you get through pressing F8 when booting, see:

http://support.gateway.com/s/software/microsof/vista/7515418/7515418su531.shtml

You will need anyway and FIRST THING some bootable device (a USB stick would be perfect, a CD - of course burned on another PC would do as well), AND an external disk (USB) same size (or better if bigger) as the one inside the laptop.

Your FIRST PRIORITY (presuming that you have data that you haven't saved elsewhere and that you need) is to make an image of the disk "as is", BEFORE any other attempt.

To be as clear as possible, even if a repair of the MFT is possible, it is also possible the steps to perform the recovery will corrupt data that currently is still accessible.

Of course, if you have no data on that disk or you don't care about those, it's perfectly OK to attempt directly a repair.

I don't want to scare you in any way :), but consider that it might be a complex procedure, and you will need a lot of time (and patience) to carry it on.

jaclaz

0

Share this post


Link to post
Share on other sites

Model number is SA6 and I am willing to put the time in to fix it as long as someone can help me through the steps to do it.

It is my sons computer so I am not sure about the recovery thing. I can restart it and F8 to see if that is an option if you want me to

Edited by rubby8892
0

Share this post


Link to post
Share on other sites

Model number is SA6 and I am willing to put the time in to fix it as long as someone can help me through the steps to do it.

It is my sons computer so I am not sure about the recovery thing. I can restart it and F8 to see if that is an option if you want me to

Yep, follow the linked tutorial on Gateway support page:

http://support.gateway.com/s/software/microsof/vista/7515418/7515418su531.shtml

until step 8, i.e. until you get to this:

RecoveryPartition03.gif

but UNLIKE in the mentioned tutorial, choose "Command Prompt".

Post if you can get to there.

jaclaz

0

Share this post


Link to post
Share on other sites

Will this erase all that is on the computer now?

0

Share this post


Link to post
Share on other sites

Will this erase all that is on the computer now?

No, until you go forward and proceed (as in the tutorial) with a system restore (steps #9 #10 #11).

That will erase everything by overwriting with what was on the PC in factory.

DO NOT do it, for the moment.

Till #8 you are simply in what is called "WinRE" Windows Recovery Environment, a sort of minimal OS on which you can perform a number of activities, like as an example from command line check the consistency of the filesystem or copy to external media files, etc.

Your laptop, from what you posted and from the mentioned Gateway page should be setup (roughly) like this:

First partition <- no drive letter <- WinRE and "factory image"

Second partition (active) <- drive letter C: boot and system volume containing the Vista :ph34r: OS

Third partition <- drive letter D: a partition to contain Data

Right now the C: partition has issues.

Since it also contains the files actually executed to check the filesystem integrity (CHKDSK, etc.) it is possible that the Drive D: is OK, but that since something in wrong in C:, the checking of the disk cannot be performed successfully.

By checking the disk from the WinRE environment we can see if the D: is OK (very possible) and hopefully even diagnose and fix the C: volume.

You should consider the WinRE environment the same as booting from another media (install CD).

jaclaz

Edited by jaclaz
0

Share this post


Link to post
Share on other sites

Is it possible to move the microsoft office to an external hard drive before I do this. The computer did not come with it and I dont want to lose it.

0

Share this post


Link to post
Share on other sites

Is it possible to move the microsoft office to an external hard drive before I do this. The computer did not come with it and I dont want to lose it.

Yes and no.

Meaning that *anything* (within very loose limits) is possible.

But transferring an installed (Commercial/mindboggingly complex/activated/needing registration) set of programs is something VERY, VERY difficult (even on normally working disks/filesystems)

As long as you are talking about Microsoft Office FILES, then it is "easy".(on normally working disks/filesystems)

BUT you seem like not having appreciated fully the situation in which you are (actually the one in your laptop is).

The symptoms you posted are those of a corrupted filesystem.

This means that any of the files residing inside that filesystem (while being still there) may be:

  1. accessible "normally"
  2. inaccessible
  3. accessible but either incomplete or however damaged

The general procedure in these cases is normally that of:

  1. attempt a more accurate diagnosis (using the command line OS in the Recovery partition or an external tool)
  2. evaluate if the damage is so trifling to allow risking a repair without making an image first (STRONGLY discouraged by me, but still a possibility/decision to take)
  3. image the disk "as is" (i.e. BEFORE attempting to repair the filesystem(s) on it) <- this is the actual "way back"
  4. attempt repairing the flilesystem(s)
  5. if successful, analyze the extents of the success and decide if it is needed to recover more files from the image or the repair was "good" or "good enough"
  6. if failed, use another PC to make another copy of the image and attempt repairing the filesystem
  7. if successful, analyze the extents of the success and decide if it is "good enough" to be redeployed to the original laptop

If you prefer, right now there is no "easy" way to even find (and copy) a given file, the only "items" that we can access and copy "safely" are:

  1. the whole disk (\\.\Physicaldrive)
  2. each whole Partition/Volume in it (\\.\LogicalDrive(s))

As said it is very possible that the filesystem corruption is of so trifling entity that only a handful of files are correupted/unindexed/inaccessible, but in order to try and understand if this is the case, you still need to make a few checks form the WInRE or form an externally booted OS.

Did you manage to get to the mentioned step #8 and from it open a command prompt? :unsure:

From that environment it is possible to do a few checks and copy (if accessible) the files (or the whole disk or the whole volumes) to an external hard disk.

jaclaz

Edited by jaclaz
0

Share this post


Link to post
Share on other sites

Ok gong to follow the process to step 8 now.

I am at the command prompt now. What do I do here?

Edited by rubby8892
0

Share this post


Link to post
Share on other sites

Type:

CHKDSK C:

[ENTER]

Since you are running CHKDSK without parameters it won't actually repair the filesystem (if not for things that bear no relevance).

It will provide some feedback that may be useful.

It may also say that it cannot repair the filesystem because the /F switch was not given.

Then re-do the same for drive D::

CHKDSK D:

[ENTER]

Then try:

MOUNTVOL

You will need to post the feedback you get from executing these commands.

Have you managed to procure the external hard disk ?

jaclaz

0

Share this post


Link to post
Share on other sites

chkdsk c:

The type of the file system is NTFS.

Volume label is OS.

WARNING! F parameter not specified.

Running CHKDSK in read-only mode.

CHKDSK is verifying files <stage 1 of 3>...

237056 file records processed.

File verification complete.

1788 large file records processed.

0 bad file records processed.

0 EA records processed.

60 reparse records processed.

CHKDSK is verifying indexes <stage 2 of 3>...

912639 index entries processed.

Index verification complete.

5 unindexed files processed

CHKDSK is verifying security descriptors <stage 3 of 3>...

237056 security descriptors processed

security descriptor verification complete

38172 data files processed

Usn Journal verification complete

The volume bitmap is incorrect

Windows found problems with the file system

Run CHKDSK with the /F (fix) option to correct these)

116854783 KB total disk space

87734608 KB in 192688 files

123784 KB in 38173 indexes

0 KB in bad sectors

351855 KB in use by the system

65536 KB occupied by the log file

28644536 KB available on disk

4096 bytes in each allocation unit

29213695 total allocation units on disk

7161134 allocation units available on disk

Failed to transfer logged messages to the event log with status 50.

chkdsk d:

The type of the file system is NTFS.

Volume label is DATA.

WARNING! F parameter not specified.

Running CHKDSK in read-only mode.

CHKDSK is verifying files <stage 1 of 3>...

256 file records processed.

File verification complete.

0 large file records processed.

0 bad file records processed.

0 EA records processed.

0 reparse records processed.

CHKDSK is verifying indexes <stage 2 of 3>...

635 index entries processed.

Index verification complete.

5 unindexed files processed

CHKDSK is verifying security descriptors <stage 3 of 3>...

256 security descriptors processed

security descriptor verification complete

18 data files processed

CHKDSk is verifying USN journal

960 USN bytes processed

Usn Journal verification complete

Windows has checked the file system and found no problems

116855807 KB total disk space

4532004 KB in 37 files

36 KB in 19 indexes

0 KB in bad sectors

70295 KB in use by the system

65536 KB occupied by the log file

112253472 KB available on disk

4096 bytes in each allocation unit

29213951 total allocation units on disk

28063368 allocation units available on disk

Failed to transfer logged messages to the event log with status 50.

mountvol

Creates, deletes, or lists a volume mount point

MOUNTVOL [drive:]path VolumeName

MOUNTVOL [drive:]path /D

MOUNTVOL [drive:]path /L

MOUNTVOL [drive:]path /P

MOUNTVOL /R

MOUNTVOL /N

MOUNTVOL /E

path Specifies the existing NTFS directory wher the mount point will reside

VolumeName Specifies the volume name that is the target of the mount point

/D Removes the volume mount point from the specified directory

/L Lists the mounted volume name for the specified directory

/P Removes the volume mount point from the specified directory, dismounts the volume, and makes the volume not mountable. You can make the volume mountable again by creating a mount point.

/R Removes volume mount point directories and registry settings for volumes that are no longer in the system

/N Disables automatic mounting of new volumes

/E Re-enables automatic moutning of new volumes

Possible values for VolumeName along with current mount points are:

\\?\Volume<71c2e141-012d-11e3-9183-806e6f6e6963>\

E:\

\\?\Volume<71c2e145-012d-11e3-9183-806e6f6e6963>\

X:\

\\>\Volume<71c2e146-012d-11e3-9183-806e6f6e6963>\

C:\

\\?\Volume<71c2e147-012d-11e3-9183-806e6f6e6963>\

D:\

Yes I have an external drive and he has saved all his files my only concern is the office. He is a college student and that is important to have.

0

Share this post


Link to post
Share on other sites

Good. :)

The situation seems not too bad.

As seen the D: drive has no issues.

The drive that is mounted a E: is most probably the recovery partition (normally not mounted/not visible in the normal system or possibly - if you have connected it - the external hard disk) whilst the X: should be the virtual "system" volume of the WinRE.

The way chdsk proceeded on disk C: is mostly normal (i.e. it shows not any kind of "catastrophic" issue).

Now I would try directly a

CHKDSK C: /F

[ENTER]

and see if it can fix the (seemingly minor) errors.

jaclaz

0

Share this post


Link to post
Share on other sites

I think what you are looking for now is it says CHKDSK discovered free space marked as allocated in the volume bitmap. Windows has made the corrections to the file system.

0

Share this post


Link to post
Share on other sites

I think what you are looking for now is it says CHKDSK discovered free space marked as allocated in the volume bitmap. Windows has made the corrections to the file system.

Good.

Try running again the "plain":

CHKDSK C:

This run should end (like the previous one on D: ) with:

Windows has checked the file system and found no problems

If this happen, EXIT the command prompt and shutdown the PC, then try rebooting it normally.

jaclaz

0

Share this post


Link to post
Share on other sites

Ok that all worked jus the way you said it would. Now that I have it back is there something I can do to cleanup all this junk on here. He was expecting a restore so as long as I can keep the office I could wipe him down to almost nothing.

0

Share this post


Link to post
Share on other sites

Ok that all worked jus the way you said it would. Now that I have it back is there something I can do to cleanup all this junk on here. He was expecting a restore so as long as I can keep the office I could wipe him down to almost nothing.

No, as said a "complete restore" (i.e. a "factory restore") will set the PC exactly as it was in factory, no user data, no added after programs, nothing.

There is not - AFAIK - a simple way to backup "selectively" the Microsoft Office install (BTW which version?) and later restore it.

That kind of programs need to be (re-) installed, but you (or your son) should have the actual media from which the Office was installed originally.

There are tools that allow to recover/save the install "key" (which is needed at install time (if you have lost it) but you need the install media.

If the MS Office is not one of the latest versions (2007, 2010 or 2013) it can be usually found used for a small amount of money.

On the other hand, if it is a 2007, 2010 or 2013 you can download for free a copy of the install:

http://office.about.com/od/Instructions/ss/Download-And-Order-Office-2010-Backup-Copy.htm

http://www.office.com/backup

http://office.microsoft.com/en-us/products/download-back-up-restore-microsoft-office-products-FX103427465.aspx

You will need the actual product key.

BTW, one should always have (or create) the install media for anything that is actually on the PC, and BTW, you should also create (like *NOW*) the recovery CD/DVD from the recovery partition, so that if something like this (but more serious) happens again, you have a way out:

http://support.gateway.com/s/software/MICROSOF/vista/7515418/7515418su527.shtml

jaclaz

0

Share this post


Link to post
Share on other sites

Not quite OT, but you can also find a legitimate download of Vista that you can use either the "internal" key or the COA key if you want to get really radical and "start from scratch". Google

"vista home" "service pack 2" iso download -torrent

You'll find a link directly to DigitalRiver files much like you can find legitimate Windows7 ones. You MUST have a valid key.

Go jaclaz' route though to keep in line with the Vendor's setup because if you go the "radical" route you can never go back to the OEM way without more hassle than it may be worth to you. -OR- you could follow the "get the keys" and the associated ISO files, "Recover to Factory" the current setup (not even making the CD's/DVD's), get another appropriate HDD, and start from scratch, thus tucking away the "Factorey Restored" HDD for whatever reason. (Side note if you decide this, after Recovery, do NOT reboot, but shut down - that's the way YOU would have received it when purchased, providing New User Name and all).

Warning - You get to "create" the Recovery CD/DVD set JUST ONCE and never again.

Assuming you want to keep the current HDD (and OEM Install/Crapware), ignore this.

/interjection

Edited by submix8c
0

Share this post


Link to post
Share on other sites

Well, NO :no:

Not NO to everything, but almost so ;).

If you google for:

"vista home" "service pack 2" iso download -torrent

you will find tens of downloads for the actual Service Pack 2, tens of "debatable" downloads and maybe 1 (one) link to the "legitimate" Digitalriver files.

In case they are listed here:

http://www.heidoc.net/joomla/technology-science/microsoft/57-windows-vista-direct-download-links

I doubt that such a thing as Vista :ph34r: with integrated SP2 files exist on DigitalRiver. :unsure:

But of course one can always update "normally" to the SP2.

I would never (personally) advice a "common user" to install a "standard" Vista :ph34r: on a large OEM laptop (like the Gateway) as it is very likely that it will become a drivers quest more than anything else.

Cannot say if the Gateway's have the same provision as HP's (one time creation of recovery media only), it is possible that there is not such a limitation. In the case of the HP's the once only can be easily re-armed.

The "restore without making CD/DVD's first can of course be done, but it is IMNSHO "pure nonsense", in some cases, if something goes wrong, the PC may not boot again to the recovered system and not to the WinRE and you would be stuck.

jaclaz

Edited by jaclaz
0

Share this post


Link to post
Share on other sites

I did not go any further with removing anything from this computer.

However last night he was on it and it shut down on him twice. Everything just goes black. It is not a battery issue cause it has a full charge.

Any idea what I can look at now? He leaves for school on Saturday and I am hoping he will have a computer.

0

Share this post


Link to post
Share on other sites

I did not go any further with removing anything from this computer.

However last night he was on it and it shut down on him twice. Everything just goes black. It is not a battery issue cause it has a full charge.

Any idea what I can look at now? He leaves for school on Saturday and I am hoping he will have a computer.

Those kind of "sudden" blanks can be due to several reasons.

First thing it must be checked if the PC actually shuts down or just the screen becomes blank.

On (aging) laptops it is quite common that the cooling duct and/or fan is clogged with dirt/hairs/dust, etc. and this can cause some serious scarce cooling that makes thermal protection shut off the thingy.

Another common cause (much more serious) if the PC is NOT shut off is overheating of just the Video card, which can cause the video go "blank", the solution here is still that of cleaning the cooling ducts and fan, but there may have been "permanent" damages to the video card BGA :ph34r:

A third common cause is the little switch that turns off the LCD when you close the lid (this is easy, it's just a matter of cleaning it with some electrical contacts spray).

And a fourth one is the actual inner video cable, it is not so infrequent that by opening and closing the lid for hundreds or thousands of times the connector on the "keyboard side" gets loose and makes false contacts or one of the wires in the cable itself is "stretched".

Try to reproduce the issue.

Check if the PC is actually shut off or not.

Check how hot it is when this happens (and/or if it happens when you use heavily the motherboard CPU and/or graphic card CPU, like - as an example - playing a "heavy demanding" game).

See if you add some "extra cooling", like one of those stands with fans, the problem disappears or happens more rarely.

Try connecting to it an external monitor screen and verify the behaviour is the same.

Inspect the cooling duct and fan, clean them.

jaclaz

0

Share this post


Link to post
Share on other sites

It is actually shutting down and I checked the fan yesterday but it does not look like it is too bad.

0

Share this post


Link to post
Share on other sites

It is actually shutting down and I checked the fan yesterday but it does not look like it is too bad.

Well, define in this (accurate ;)) scale:

  1. warm
  2. hottish
  3. very hot
  4. d@mn hot
  5. scolding

how you would describe the feeling when you feel the underside of the laptop immediately after the shut down occurs?

Also observe if it shuts down when it is "idle" (say with just the screensaver running) or if it happens only (or quicker) when the CPU or GPU are heavily in use.

Normally any "software" induced (and most of the "hardware" induced) faults would result in a BSOD, and/or a "freeze" and not in a shut down.

Do check anyway the event logs to see if there is anything "strange" in them.

Check also thoroughfully the zillion settings for "hybernation", "sleep", "power saving", etc.

Still along the idea that it is a "thermal shutdown", I have seen more than one laptop where in factory some "low cost" thermal pads are used (as opposed to good thermal paste) on the processor and *somehow* these thermal pads, aging, seem to loose some of their heat conductive capabilities.

jaclaz

Edited by jaclaz
0

Share this post


Link to post
Share on other sites

It is actually shutting down and I checked the fan yesterday but it does not look like it is too bad.

Well, define in this (accurate ;)) scale:

  1. warm
  2. hottish
  3. very hot
  4. d@mn hot
  5. scolding

how you would describe the feeling when you feel the underside of the laptop immediately after the shut down occurs?

Also observe if it shuts down when it is "idle" (say with just the screensaver running) or if it happens only (or quicker) when the CPU or GPU are heavily in use.

Normally any "software" induced (and most of the "hardware" induced) faults would result in a BSOD, and/or a "freeze" and not in a shut down.

Do check anyway the event logs to see if there is anything "strange" in them.

Check also thoroughfully the zillion settings for "hybernation", "sleep", "power saving", etc.

Still along the idea that it is a "thermal shutdown", I have seen more than one laptop where in factory some "low cost" thermal pads are used (as opposed to good thermal paste) on the processor and *somehow* these thermal pads, aging, seem to loose some of their heat conductive capabilities.

jaclaz

I would say hottish.

It is shutting down in the middle of use.

How do I check the event logs?

0

Share this post


Link to post
Share on other sites

I copied a portion that I thought might help

Error 8/16/2013 10:37:41 AM Service Control Manager Eventlog Provider 7022 None
Error 8/16/2013 10:32:17 AM Service Control Manager Eventlog Provider 7026 None
Error 8/16/2013 10:32:09 AM WMI 10 None
Error 8/16/2013 10:31:30 AM Eventlog 1101 Event processing
Error 8/16/2013 10:31:29 AM EventLog 6008 None
Error 8/16/2013 10:29:54 AM Application Popup 1060 None
Warning 8/15/2013 6:59:29 PM Servicing 4376 None
Warning 8/15/2013 6:59:29 PM Servicing 4376 None
Warning 8/15/2013 6:59:29 PM Servicing 4376 None
Error 8/15/2013 6:53:13 PM Application Hang 1002 (101)
Warning 8/15/2013 6:53:11 PM Servicing 4374 None
Warning 8/15/2013 6:53:11 PM Servicing 4374 None
Warning 8/15/2013 6:53:11 PM Servicing 4374 None
Warning 8/15/2013 6:53:11 PM Servicing 4374 None
Warning 8/15/2013 6:53:10 PM Servicing 4374 None
Warning 8/15/2013 6:53:10 PM Servicing 4374 None
Warning 8/15/2013 6:53:10 PM Servicing 4374 None
Warning 8/15/2013 6:53:10 PM Servicing 4374 None
Warning 8/15/2013 6:53:09 PM Servicing 4374 None
Warning 8/15/2013 6:53:09 PM Servicing 4374 None
Warning 8/15/2013 6:53:08 PM Servicing 4374 None
Warning 8/15/2013 6:53:08 PM Servicing 4374 None
Warning 8/15/2013 6:53:08 PM Servicing 4374 None
Warning 8/15/2013 6:53:08 PM Servicing 4374 None
Warning 8/15/2013 6:53:07 PM Servicing 4374 None
Warning 8/15/2013 6:53:07 PM Servicing 4374 None
Warning 8/15/2013 6:53:07 PM Servicing 4374 None
Warning 8/15/2013 6:53:07 PM Servicing 4374 None
Warning 8/15/2013 6:53:06 PM Servicing 4374 None
Warning 8/15/2013 6:53:06 PM Servicing 4374 None
Warning 8/15/2013 6:53:06 PM Servicing 4374 None
Warning 8/15/2013 6:53:05 PM Servicing 4374 None
Warning 8/15/2013 6:53:05 PM Servicing 4374 None
Warning 8/15/2013 6:53:05 PM Servicing 4374 None
Warning 8/15/2013 6:53:04 PM Servicing 4374 None
Error 8/15/2013 6:48:16 PM SharedAccess_NAT 31004 None
Error 8/15/2013 6:47:59 PM Service Control Manager Eventlog Provider 7026 None
Error 8/15/2013 6:47:52 PM WMI 10 None
Error 8/15/2013 6:47:52 PM Service Control Manager Eventlog Provider 7009 None
Error 8/15/2013 6:47:52 PM Service Control Manager Eventlog Provider 7000 None
Warning 8/15/2013 6:47:17 PM Time-Service 134 None
Error 8/15/2013 6:47:11 PM Eventlog 1101 Event processing
Error 8/15/2013 6:47:07 PM EventLog 6008 None
Error 8/15/2013 6:46:16 PM Application Popup 1060 None
Warning 8/14/2013 9:37:27 PM Servicing 4374 None
Warning 8/14/2013 9:37:27 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:26 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:25 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:24 PM Servicing 4374 None
Warning 8/14/2013 9:37:23 PM Servicing 4374 None
Warning 8/14/2013 9:37:23 PM Servicing 4374 None
Warning 8/14/2013 9:37:23 PM Servicing 4374 None
Warning 8/14/2013 9:37:23 PM Servicing 4374 None
Warning 8/14/2013 9:37:22 PM Servicing 4374 None
Error 8/14/2013 9:33:16 PM Service Control Manager Eventlog Provider 7026 None
Error 8/14/2013 9:33:11 PM Service Control Manager Eventlog Provider 7009 None
Error 8/14/2013 9:33:11 PM Service Control Manager Eventlog Provider 7000 None
Error 8/14/2013 9:33:09 PM WMI 10 None
Error 8/14/2013 9:32:03 PM Eventlog 1101 Event processing
Error 8/14/2013 9:31:58 PM EventLog 6008 None
Error 8/14/2013 9:30:51 PM Application Popup 1060 None
Warning 8/14/2013 9:29:19 PM Servicing 4374 None
Warning 8/14/2013 9:29:19 PM Servicing 4374 None
Warning 8/14/2013 9:29:19 PM Servicing 4374 None
Warning 8/14/2013 9:29:19 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:18 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:17 PM Servicing 4374 None
Warning 8/14/2013 9:29:16 PM Servicing 4374 None
Warning 8/14/2013 9:29:16 PM Servicing 4374 None
Warning 8/14/2013 9:29:16 PM Servicing 4374 None
Warning 8/14/2013 9:29:16 PM Servicing 4374 None
Warning 8/14/2013 9:29:16 PM Servicing 4374 None
Warning 8/14/2013 9:28:51 PM Servicing 4374 None
Warning 8/14/2013 9:28:51 PM Servicing 4374 None
Warning 8/14/2013 9:28:39 PM Search 3036 Gatherer
Warning 8/14/2013 9:28:38 PM Servicing 4374 None
Warning 8/14/2013 9:28:37 PM Servicing 4374 None
Warning 8/14/2013 9:28:24 PM Servicing 4374 None
Warning 8/14/2013 9:28:24 PM Servicing 4374 None
Warning 8/14/2013 9:27:10 PM Servicing 4374 None
Warning 8/14/2013 9:27:10 PM Servicing 4374 None
Warning 8/14/2013 9:26:43 PM Servicing 4374 None
Warning 8/14/2013 9:26:43 PM Servicing 4374 None
Warning 8/14/2013 9:26:42 PM Servicing 4374 None
Warning 8/14/2013 9:26:42 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:41 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:40 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:39 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:38 PM Servicing 4374 None
Warning 8/14/2013 9:26:37 PM Servicing 4374 None
Warning 8/14/2013 9:26:37 PM Servicing 4374 None
Warning 8/14/2013 9:26:37 PM Servicing 4374 None
Warning 8/14/2013 9:26:37 PM Servicing 4374 None
Warning 8/14/2013 9:26:37 PM Servicing 4374 None
Warning 8/14/2013 9:26:36 PM Servicing 4374 None
Warning 8/14/2013 9:26:36 PM Servicing 4374 None
Warning 8/14/2013 9:21:07 PM Servicing 4374 None
Warning 8/14/2013 9:21:07 PM Servicing 4374 None
Warning 8/14/2013 9:21:04 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:03 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:02 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:01 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:21:00 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Warning 8/14/2013 9:20:59 PM Servicing 4374 None
Error 8/14/2013 9:09:53 PM Service Control Manager Eventlog Provider 7026 None
Error 8/14/2013 9:08:59 PM Service Control Manager Eventlog Provider 7009 None
Error 8/14/2013 9:08:59 PM Service Control Manager Eventlog Provider 7000 None
Error 8/14/2013 9:08:37 PM WMI 10 None
Error 8/14/2013 9:08:16 PM Eventlog 1101 Event processing
Error 8/14/2013 9:08:10 PM EventLog 6008 None
Error 8/14/2013 9:07:34 PM Application Popup 1060 None
Warning 8/14/2013 3:18:35 PM Search 3036 Gatherer
Error 8/14/2013 2:52:45 PM Microsoft Antimalware 2001 None
Error 8/14/2013 2:42:28 PM SharedAccess_NAT 31004 None
Warning 8/14/2013 2:41:29 PM Time-Service 36 None
Error 8/9/2013 8:38:28 PM Bonjour Service 100 None
Error 8/9/2013 8:38:28 PM Bonjour Service 100 None

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.