[Astalavista]

deleted...

I am sorry... My humble apologies to you.

I hope someone else can help u good luck . no more reply from me

****... my 36MB 7zip office Suite.

[tr4ck]

Hi,

Can someone help me. I installed XP into vmware and copied office 2003 to c:\. Whenever I run office shinker I always get a 290 something folder and it says it finished shriking in like 30 seconds. I've attached my log files.


Thanks.

Attached File(s)

•  office.rar (7.73K)
  Number of downloads: 50

[Cunning1inguist]

tr4ck, on Feb 2 2005, 12:35 AM, said:

Hi,

Can someone help me.  I installed XP into vmware and copied office 2003 to c:\.  Whenever I run office shinker I always get a 290 something folder and it says it finished shriking in like 30 seconds.  I've attached my log files.


Thanks.

same problem here. You mean the folder you get is 293MB, right? we're probably making the same mistake. If you ever figure it out, post it here!

Wheee!!! It works!!! I just needed to do an admin install point
(setup.exe /a)

[Astalavista]

@ tr4ck

check your pm...

that should fix your problem.

good luck.

[MAVERICKS CHOICE]

Cunning1inguist, on Feb 3 2005, 09:16 AM, said:

tr4ck, on Feb 2 2005, 12:35 AM, said:

Hi,

Can someone help me.  I installed XP into vmware and copied office 2003 to c:\.  Whenever I run office shinker I always get a 290 something folder and it says it finished shriking in like 30 seconds.  I've attached my log files.


Thanks.

same problem here. You mean the folder you get is 293MB, right? we're probably making the same mistake. If you ever figure it out, post it here!

Wheee!!! It works!!! I just needed to do an admin install point
(setup.exe /a)

Don't quite get what you mean there? My source was built from an admin installation? Can you please elaborate on this?

[Cunning1inguist]

MAVERICKS CHOICE, on Feb 5 2005, 05:04 AM, said:

Cunning1inguist, on Feb 3 2005, 09:16 AM, said:

tr4ck, on Feb 2 2005, 12:35 AM, said:

Hi,

Can someone help me.  I installed XP into vmware and copied office 2003 to c:\.  Whenever I run office shinker I always get a 290 something folder and it says it finished shriking in like 30 seconds.  I've attached my log files.


Thanks.

same problem here. You mean the folder you get is 293MB, right? we're probably making the same mistake. If you ever figure it out, post it here!

Wheee!!! It works!!! I just needed to do an admin install point
(setup.exe /a)

Don't quite get what you mean there? My source was built from an admin installation? Can you please elaborate on this?

In order for OfficeShrink to work, you have to create what's called an "Administrative Install point" This page is a really good starting point for this process.

Attached File(s)

•  2.gif (6.04K)
  Number of downloads: 5

[MAVERICKS CHOICE]

Thanks for the reply & do understand what you mean re the admin install.
The problem I'm experiencing is when the prog is executed on any other machine besides the one I made it from the extraction takes place & install starts however after a few more moments the install retracts & stops which obviously does not work.

[Astalavista]

maverick are u aware of the netframework issue?

[MAVERICKS CHOICE]

Did touch on this somewhere? I have it installed on all my machines?

[eagle00789]

i've tried to run this shrinker on a clean install of xp (in VPC) without any other programs installed than the VPC-Tools, but it keeps bigging me with the file msaccess.exe that it can not find this file while it is there.

The problem lies in the fact that the button is labeld N&ogmaals and the configfile that is made by Shrinker states &Nogmaals. When this was fixed all worked for me.

(p.s. i use office 2003 professional dutch)

[RoMzi]

Hi guys! After one whole day of trying and reading all the replys 100 times I solve the problem for non English office users.Office shrink should work fine with EVERY language of office not just the ones in setup.

Here it is what to do to make it work.

1. Make slipstream copy of your office via Run=>E:\Setup.exe /a in any folder you want. Example c:\Office2003

2. Use Microsoft Office resource kit, to make the .MST file. (the name must be Unattend.MST)When asked for .msi point to .msi file in the c:\Office2003 and then deselect aplications you won't need.(Acess,OneNote...etc)

3. When asked, make the .MST file in the same folder.(c:\Office2003)

added:
copy your C:\Office folder to your D: drive or burn it on cd

3.1 Now you must format your PC and install only windows without Office resource kit !
Now with fresh windows installed:

4. Here comes the tricky part:

You must know your office language code and ENGLISH name of the language.
Here ar examples:

Arabic (Saudi Arabia) 1025 
Bulgarian 1026 
Chinese (Hong Kong SAR) 3076 
Chinese (PRC) 2052 
Chinese (Taiwan) 1028 
Croatian 1050 
Czech 1029 
Danish 1030 
Dutch (Netherlands) 1043 
English (United States) 1033 
Estonian 1061 
Finnish 1035 
French (France) 1036 
German (Germany) 1031 
Greek 1032 
Hebrew 1037 
Hindi 1081 
Hungarian 1038 
Italian (Italy) 1040 
Japanese 1041 
Korean 1042 
Latvian 1062 
Lithuanian 1063 
Norwegian (Bokmal) 1044 
Polish 1045 
Portuguese (Brazil) 1046 
Portuguese (Portugal) 2070 
Romanian 1048 
Russian 1049 
Serbian (Latin) 2074 
Slovak 1051 
Slovenian 1060 
Spanish (Modern Sort) 3082 
Swedish 1053 
Thai 1054 
Turkish 1055 
Ukrainian 1058

So for my Office language is Slovenian and code is 1060.

5. You have to create folder on C:\ named office( C:\Office)
6. Make shure that you do NOT have office installed on your PC.
7. Navigate on disk C:\ and leave the window open (you should see folders like Program Files,Windows,Office...etc)
8. Now start the office shrink( shrink_lang02.exe)
9. When asked for language leave to English and click on Next
10. At that moment the file shrink.ini will apear in window that we leave open before (C:\)
11. the .ini should look like this:

[Language]
lang=English
dir=1033
retry=&Retry
title=Microsoft Office
error=Error

12. Now set the lang=to your language of Office (must be the english translation of your language-see above what it is for your language)
13. Set dir= to code of your language (see above)
14 Set the retry= to what the windows say in your language(not translated) when they want you to retry something (dont forget to put the"&"in front of the word)
14.set the title=(here are most of the mistakes made)It is not always the "Microsoft office",in fact in my case ther must be Microsoft Office Professional Edition 2003 If not you will get the 1308 Error !!!! so you must try both versions.
15.set the error= to what your windows say when you get Error(in your language not in English)
16. My shrink.ini now look like this:

[Language]
lang=Slovenian
dir=1060
retry=&Ponovi
title=Microsoft Office Professional Edition 2003
error=Napaka

17. Don't forget to save the changes in your shrink.ini !
18. Now you can continue with your Office shrink program and set your office source (the folder you copied to safe place before you formated your disk)
19. In next window set target must be C:\office\ !!!
20. In window select setup.exe
21. In next window select Unattend.MST
22. Check your shrink.ini
23. Your shrink.ini now look similar like this:

[Language]
lang=Slovenian
dir=1060
retry=&Ponovi
title=Microsoft Office Professional Edition 2003
error=Napaka
[Directory]
Office Source=C:\Office2003\
Office Target=C:\office\
[Files]
Office Setup EXE file=SETUP.EXE
Office Setup MST file=Unattend.MST
[Version]
Number=11.0.5614.0

added:

You should check your office version and correct the shrink.ini

When you set your language in officeshrink it writes the default version for the language, but yours my be different.You will find your version number if you drag your mouse over the Unattend.MST file and leave it there for a while.
Check the line under ProductVersion=11.0.5614.0 and retype the version number in your shrink.ini

Save the canges you made.

Start the shrink_lang02.exe again and you will be promped to use the setup found on your computer.Click Yes and the process will start.

24. Now start the shrink_lang02.exe again and when asked to use the setup found on your computer select yes.
25. The process will now start...
23. You will see instalation progress bar and ALOT of flashing error messages.(this is ok)
24. At the end process you will see the mesage Completed and you get your shrinked Office !!!

[Cunning1inguist]

Here's my instructions detailed from start to finish. It even opens in Acrobat 5.0. I can't exactly call it mine, honestly, since I just copied everyone else's work, giving credit where it was due, and compiled it into a single pdf.

Here it is, do with it as you like

Quote

Nice guide any solution to this in your quote:
Most Common Problem
QUOTE
The install begins - goes through the decompression - starts the Office 2003 install (I can even see
the MS Office folder in Program Files) - and then suddenly reverses itself and disappears! I get no
errors and no log files

Doh! I need to find the solution for that and add it as well.

Attached File(s)

•  office_xp.pdf (148.64K)
  Number of downloads: 24717

[MAVERICKS CHOICE]

Cunning1inguist, on Feb 14 2005, 05:21 PM, said:

Here's my instructions detailed from start to finish. It even opens in Acrobat 5.0. I can't exactly call it mine, honestly, since I just copied everyone else's work, giving credit where it was due, and compiled it into a single pdf.

Here it is, do with it as you like
<{POST_SNAPBACK}>

Nice guide any solution to this in your quote:
Most Common Problem
QUOTE
The install begins - goes through the decompression - starts the Office 2003 install (I can even see
the MS Office folder in Program Files) - and then suddenly reverses itself and disappears! I get no
errors and no log files. Any ideas what I managed to screw up in a pretty straightforward process?

Ive experienced the same thing after shrinking many times. Asta pointed me to a Netframework issue but dismissed this as both machines have it installed.
Any ideas?

[Astalavista]

u still hv the same problem? wow

[MAVERICKS CHOICE]

Astalavista, on Feb 14 2005, 07:05 PM, said:

u still hv the same problem? wow
<{POST_SNAPBACK}>

Yeah Asta but not really worried bout it still have the office zipped down enough. But would be nice to have it smaller.

[RoMzi]

This post was deleted because of wrong informations.

RoMzi

[Venator]

I've followed precisely the guide posted by RoMzi but I always receive the message "Shrinking of Office was terminated".
I'm running Office 2003 italian version with no upgrades.
I've also updated the ini file with the correct setup.exe version, as suggested by RoMzi, but with no effect.

I attach my shrink.ini file,my logs and my unattend.mst file for reference.
Thanks for your help.
Venator

Attached File(s)

•  office.zip (8.45K)
  Number of downloads: 56

[Astalavista]

Venator use Cunning guide. He knows best

http://www.msfn.org/board/index.php?act=At...pe=post&id=4874

[Venator]

Astalavista, on Feb 15 2005, 08:45 AM, said:

Venator use Cunning guide. He knows best

http://www.msfn.org/board/index.php?act=At...pe=post&id=4874
<{POST_SNAPBACK}>

This says nothing more than how to integrate updates and to create the 7zip silent installer, so I don't require this guide (yet )
My problem is the impossibility to shrink my office: one step at a time!
Venator

[RoMzi]

The post No: 331 is corrected check the whole process again.(It was my mistake)

Venator this is the shrink.ini you need.

[Language]
lang=Italian
dir=1040
retry=&Riprova
title=Microsoft Office Professional Edition 2003
error=Errore
[Directory]
Office Source=C:\Office2003\
Office Target=C:\office\
[Files]
Office Setup EXE file=SETUP.EXE
Office Setup MST file=Unattend.MST
[Version]
Number=11.0.6361.0

I made a mistake to tell you guys to read the version number from your setup.ini file.It is the number that you get from Unattend.MST file that should work.(you can get all the informations if you leave your mouse cursor on the Unattend file for a while.
And also you must not do the process of shrinking if you have office resource kit installed. It must be clean instalation.Only windows !

The "Office Source=" section is the folder where you have your extracted office and your Unattend.MST

It will not work now if you yust change the shrink.ini file you must start the whole process again because the office shrink process must be on clean PC (without Office resource kit installed)

I wil correct my post above,So the steps will be correct.
Please see my new tutorial here:MSFN FORUM I hope that you will solve your problems.

Please report results.