[scsgoal31]

Alright, so I'm at that point in the building where you need to hook up all the various wires from the case to the mobo. I've done the important ones except for the USB ports. Coming off the 2 front USB's, I have a VCC, D+, D- and a ground. However, on my motherboard, I have the following "openings":

USB +5V w/ - & +
USB +6V w/ - & +
USB +7V w/ - & +
USB +8V w/ - & +



What voltages should I be hooking up the two USB ports to?

[Treeman]

SCSGoal31,

First, check your mobo documentation to see what type of pin-out is on the board.
Pin outs include 2x4, 2x8 and 2x9

Typically this is the wire arrangement by color code:
1 Red 5 Volt
2 White Data -
3 Green Data +
4 Black Ground
Or you can go here for more info: Front USB
Treeman