dk_ Posted October 26, 2004 Share Posted October 26, 2004 Excuse me for my English... This is short guide how to installing MS RIS and deploying WinXP OS w Drivers and additonal software.Hardware:Server 1 - AD + DHCP (w2k3std)Server 2 - RIS (w2k3std)Test workstations w Intel and Sis MB (wXP prof, wXP Home as Guest OS LAN - included AD:Must exist user w/o Admin privilege, but w right to "Join a computer to the domain"This right may added via "Domain security policy" -> Local Policy \ User Right Assignment \ Add workstations to domainOr Active Directory Users and Computers \ "DOMAIN" \ Delegate Control -> Join a computer to the domain.Or together DHCP:1 Scope w Ip range 192.168.0.xx - 192.168.0.xx Scope options like Proxy, dns, wins, ntp - NOTHING ELSEINet may say to you - Add option #60, 66, 67 - its not needed for modern NICs w PXE 2.xx boot rom like Intel PRO 100/1000, Marvell, Realtek, Sis LOM (IMHO RIS:Little storyI have E55 Error... something like "PROXY DHCP do not answer" After reading PXE spec. I'm understand what is PROXY DHCP - its RIS binl service. Good name for TFTPD... In Binlsvc.log found - Sending response to 255.255.255.255 only!!! Of course its nothing to work PXE client show me that it takes IP from DHCP... but RIS is sending reply to all... HM... And I'm stop and disable DHCP service on RIS service (w/o any scope) -- remote boot starts to work.End of Little storyNothing intresting in tuning RIS. Adding RIS from Install/Remove, then risetup -add to next images.2 servers is not necessary, may be one is better, but... OSC:laziness - is the main world engine In RemoteInstall\OSChooser\%LANG%\login.oscMy %LANG is RussianLets find strings  User name: <INPUT NAME="USERNAME" MAXLENGTH=255>  Password: <INPUT NAME="*PASSWORD" TYPE=PASSWORD MAXLENGTH=20><BR>and add VALUE="USER_NAME_IN_AD_W_PRIV_TO_ADD_NEW_PC_TO_AD" VALUE="PASSWORD_OF_THIS_USER" like this:  User name: <INPUT NAME="USERNAME" MAXLENGTH=255 VALUE="USER_NAME">  Password: <INPUT NAME="*PASSWORD" TYPE=PASSWORD MAXLENGTH=20 VALUE="PASSWORD"><BR>it's all my changes in .OSC filesWAR1 - w Intel NICs:Trying to install wIn from RIS and, of course, Error about Win "don't have necessary network drivers" MS.com says to add drivers to i386 folder and $OEM$\$1\Drivers\Nics and edit Ristndrd.sif w follow:OemPreinstall=YesOemPnPDriversPath = "drivers\nic\ipro100"But it's NOT work!!!SPECIAL for MS RIS Intel have SOLUTION! Named (from Intel): "RIS-Specific INF files for use with Intel 10/100 Network Adapters on Windows* XP RIS images."http://downloadfinder.intel.com/scripts-df...ldID=6761&agr=NGreat - it's WORK ....But not all - new Intel LOM (Lan on MotherBoard) on i915 chipset failed w same Error Installing wIn from CD and cheking Hardware ID = pci\ven_8086&Dev_1065. Seeking Dev_1065 in downloaded from Intel INF. None (After dancing around INF file with shaman tambourine... combine SPECIAL INF w ORIGINAL INF for this NIC Hand made INF ))Nics from SIS, Marvell and Realtek working fine 8-)WAR2 - w MassStorageDevices:After 3 days of experiments found 4 points of parsing MassStorageDrivers1) Textmode setup before copying files2) Textmode setup after copying files to c:\bla-bla.~LS3) Before loading GUI setup4) Loading Installed wInSteps1) In $OEM$ folder creating TEXTMODE folder2) Copy txtsetup.oem from original driver to Textmode folder3) Parsing txtsetup.oem (examples from my txtsetup.oem):[Disks] ;Location of sys, cab, dll & inf files. This section needed for section [Files.xxxxxx]d1 = "SiS Raid/IDE Driver Diskette", \disk.tag, \NameOfDisk(any) = "Unused information(any)", PathToTagFile\TagFile(Unused by Setup) , PathToFiles (\ - root of TEXTMODE)In RIS may be only one "Disk" maped to root of Textmode likedisk = "Textmode MSD",\ ,\ (but not tested)About points of parsing MSD... On first point (Setup is loading drivers...) setup parser understend folder structure under Textmode!!!!!May be: + Textmode |--------SisRaid |--------IntelRaidand [Disks]disk1 = "SiS Raid/IDE Driver Diskette", \disk.tag, \SiSRAID\ !!!!!!!!!!!!!!!Setup load correct driver and possible to manage partionsBUT on Second stage (copying files from c:\bla-bla.~LS to c:\windows) setup stops w error somthing like "sysraid.sys not found -> Retry, Skip" After skipping and rebooting GUI setup will load BSOD Point 3So... structure of folders in Textmode is impossible :'(Ok, get back to txtsetup.oem. Next section[Defaults]scsi = VMSCSIThis section Seems not important or not used by setup[scsi]SISRAID964_181 = "WinXP SiS180 Raid Controller"VMSCSI = "VMware SCSI Controller Installation Disk"iaStor = "Intel® 82801ER SATA RAID Controller"InternalNameForThisSIF = "Discription""Discription" MUST BE in ristndrd.sif (i386\Templates) like this[MassStorageDrivers]"WinXP SiS180 Raid Controller" = "OEM""VMware SCSI Controller Installation Disk" = "OEM""Intel® 82801ER SATA RAID Controller" = "OEM""IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"Next sections[Files.scsi.SISRAID964_180] ;[Files.scsi.InternalNameForThisSIF(from [sCSI])] driver = d1,SiSRaid.sys, SISRAID ; SISRAID - name of service must be = name of file!IMPORTANT START!catalog= d1,Property.dll;Original line was DLL= d1,Property.dll, DLL MUST BE RENAMED to "CATALOG" NOT TO INF, as you may read in other web-sites, because setup process rename files w INF predict to "OEMscsXX.inf" and place to \%windir%\OemDir !03.09.2004 14:40 1 779 oemscs01.inf30.03.2001 22:58 135 168 oemscs02.inf ; this is not INF!!!! By size 27.09.2004 12:41 8 264 sisraid.cat03.09.2004 13:43 46 464 SiSRaid.sysFor SiS Raid I'm found error (then dll was renamed) in setupapi.log in \%windir% (not full log)[2004/10/19 17:40:16 288.1111 Driver Install]#-019 Searching for hardware ID(s): pci\ven_1039&dev_0180&subsys_810e1043&rev_01,pci\ven_1039&dev_0180&subsys_810e1043,pci\ven_1039&dev_0180&cc_010485,pci\ven_1039&dev_0180&cc_0104#I022 Found "PCI\VEN_1039&DEV_0180" in C:\WINDOWS\inf\oem0.inf; Device: "SiS 180 RAID Controller"; Driver: "SiS 180 RAID Controller"; Provider: "Silicon Integrated Systems Corp"; Mfg: "Silicon Integrated Systems Corp"; Section name: "SIS180PCI".#I058 Selected best compatible driver.#-124 Doing copy-only install of "PCI\VEN_1039&DEV_0180&SUBSYS_810E1043&REV_01\3&267A616A&0&28".#-167 SPFILENOTIFY_NEEDMEDIA: Tag = "", Description= "SiS 180 Raid Controller Driver Disk", SourcePath = "C:\WINDOWS\OemDir", SourceFile = "property.dll", Flags = 0x00000000.#E169 SPFILENOTIFY_NEEDMEDIA: returned FILEOP_ABORT. Error 1223: The operation was canceled by the user.#W187 Install failed, attempting to restore original files.#I060 Set selected driver.#-166 Device install function: DIF_INSTALLDEVICE.#I125 Installing NULL driver for "PCI\VEN_1039&DEV_0180&SUBSYS_810E1043&REV_01\3&267A616A&0&28". !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Installing NULL driver - is really BSOD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!#I121 Device install of "PCI\VEN_1039&DEV_0180&SUBSYS_810E1043&REV_01\3&267A616A&0&28" finished successfully.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! finished successfully :DDDDDDDDDDD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!This is Point 4 !IMPORTANT STOP!inf = d1,SiSRaid.infcatalog= d1,sisraid.catthis sections from original driver w/o changes[HardwareIds.scsi.SISRAID964_180]id="PCI\VEN_1039&DEV_0180", "SISRAID"[Config.SISRAID]value = parameters\PnpInterface,"5",REG_DWORD,1All about txtsetup.oem, full listing of my config fliles will be at the end of postSteps continue:4) After compiling txtsetup.oem copy all files listed in [Files.xxxxxx] sections to Textmode\5) In ristndrd.sif (i386\Templates) MUST BE Sections from [sCSI]"WinXP SiS964 Raid Controller" = "OEM""VMware SCSI Controller Installation Disk" = "OEM""Intel® 82801ER SATA RAID Controller" = "OEM";AND THIS (below)"IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"Another intresting thing... In ristndrd.sif section [OEMBootFiles] is EMPTY (but exist)! I'm not list files from Textmode to this section and all working fine!!!!!!!!Tip. All errors during setup w MassStorageDrivers like error in bla-bla.c file string XXXX BECAUSE txtsetup.oem is BAD. Write it carefully!!!Deploy process:Client from PXE install OSAt the end of Install run sysprep -factory -quiet - rebootFactory copy from network share needed files; pnp drivers, Mui, other...Factory install pnp driversStarting resealAt the end of reseal installing MUI, reg tweaks, OEM logosDirectory structure:RIS Server\D\+OEM|--Drivers -> Then copy drivers via Factory paths !!automatically!! added to HKLM \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ DevicePath|----- 00_addons|----- 01_chipset|----- 02_Video|----- ......|-- Mui|-- Mui2k3|-- OEM -> My .cmd files; oeminfo.ini, oemlogo.bmp and other |-- Storage -> For 2k3 server raid drivers+RemoteInstall|-- Admin|----- NicI386 - collection of files, to add in I386 folder for new Image|----- TextMode - MSD|--Setup\Russian\Images\XPC.SP2|----- $OEM$|--------$1|----------- Drivers|-------------- Nic -> For Factory work|----------- Sysprep|-------------- factory.exe|-------------- netcfg.exe|-------------- setupcl.exe|-------------- sysprep.exe|-------------- sysprep.inf|-------------- winbom.ini|-------- Textmode|----- i386LISTINGs-------------ristndrd.sif-------------[Data]AutoPartition="0" ;Setup don't auto create partitionsMsDosInitiated="1"UnattendedInstall="Yes"floppyless="1"OriSrc="\\%SERVERNAME%\RemInst\%INSTALLPATH%"OriTyp="4"LocalSourceOnCD=1[setupData]OsLoadOptions="/noguiboot /fastdetect"SetupSourceDevice = "\Device\LanmanRedirector\%SERVERNAME%\RemInst\%INSTALLPATH%"[GuiUnattended]AdminPassword=*AutoLogon=YesAutoLogonCount=99OEMSkipRegional=1OEMSkipWelcome=1TimeZone=201[unattended]AutoActivate=NoCrashDumpSetting=0DriverSigningPolicy=IgnoreUpdateInstalledDrivers=YesFactoryMode=NoFileSystem=LeaveAloneRepartition=No ;Setup don't auto create partitionsOemPreinstall=YesOemPnPDriversPath = "drivers\nic\D-Link\500sx;drivers\nic\D-Link\500T;drivers\nic\D-Link\530;............."OemSkipEula=YesTargetPath=\windowsUnattendMode=FullUnattendedUnattendSwitch=YesWaitForReboot=NoOverwriteOemFilesOnUpgrade=NoInstallFilesPath = "\\%SERVERNAME%\RemInst\%INSTALLPATH%\%MACHINETYPE%"LegacyNIC = 1[Display]BitsPerPel=32Xresolution=1024YResolution=768VRefresh = 60[PCHealth]ER_Display_UI=0ER_Enable_Applications=NoneER_Enable_Kernel_Errors=1ER_Enable_Reporting=0ER_Enable_Windows_Components=1ER_Force_Queue_Mode=0ER_Include_MSApps=0ER_Include_Shutdown_Errs=0RA_AllowFullControl=1RA_AllowToGetHelp=1RA_AllowUnsolicited=1RA_MaxTicketExpiry=28800[RegionalSettings]Language = 0419LanguageGroup=5,1SystemLocale=00000419UserLocale=00000419UserLocale_DefaultUser = 00000419InputLocale=0409:00000409, 0419:00000419InputLocale_DefaultUser=0409:00000409[shell]DefaultStartPanelOff=NoDefaultThemesOff=Yes[TapiLocation]CountryCode=7Dialing=PulseAreaCode=3812LongDistanceAccess="0"[TerminalServices]AllowConnections=1[userData]ProductKey=XXXXX-XXXXX-XXXXX-XXXXX-XXXXXFullName="OEM"OrgName="BTG-OEM"ComputerName=*AutoConfig=1[identification]JoinWorkgroup=VTI[Networking]InstallDefaultComponents=Yes[RemoteInstall]Repartition=No ;Setup don't auto create partitionsUseWholeDisk=No ;Setup don't auto create partitions[branding]BrandIEUsingUnattended=YesHome_Page=http://www.btg.ruHelp_Page=http://www.btg.ruSearch_Page=http://www.ya.ru[WindowsFirewall] Profiles = WindowsFirewall.TurnOffFirewall[WindowsFirewall.TurnOffFirewall] Mode = 0[GuiRunOnce] Command1="c:\sysprep\sysprep -factory -quiet -reboot"[MassStorageDrivers]"WinXP SiS964 Raid Controller" = "OEM""WinXP SiS180 Raid Controller" = "OEM""VMware SCSI Controller Installation Disk" = "OEM""Intel® 82801ER SATA RAID Controller" = "OEM""IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"[OEMBootFiles][OSChooser]Description ="XP Prof Corp SP2" Help ="MSD: VmWare BUSLogic, SiS: 964_180,964_181,965, iNTEL: 82801ER SATA Raid"LaunchFile = "%INSTALLPATH%\%MACHINETYPE%\templates\startrom.com"ImageType =FlatVersion="5.1 (0)"-------------winbom.ini-------------[Version]signature=$CHICAGO$[ComputerSettings]ExtendPartition = 0FontSmoothing = OnHibernation = NoPowerScheme = Desktop [Factory]AutoDetectNetwork = Yes 'If you have error 1231 in winbom.log this line must BEFactoryComputerName = * 'If you have error 1231 in winbom.log this line must BERebootAfterComputerName = Yes 'If you have error 1231 in winbom.log this line must BEWinbomType="Factory"Password="PASSWORD"Username="USER@DOMAIN"Reseal = RebootResealFlags = -activated -nosidgenResealMode = MiniLogging =YesLogfile = c:\windows\factory.log[PnpDrivers]\\RISserver\oem\drivers = PnPDrv\\RISserver\oem\oem = oem\\RisServer\oem\Mui = MuiRu[PnpDriverUpdate]TargetRoot = %WINDIR%WaitForPnP = YesUpdateInstalledDrivers = NoDevicePath = PnPDrv\Ati;[OEMLink]OEMBrandIcon = %WINDIR%\Oem\btgSM.icoOEMBrandLink = "http://www.btg.ru/"OEMBrandLinkInfoTip = "Just Tip "OEMBrandLinkText = "It'll be in Start menu" -------------Sysprep.inf-------------[Display] BitsPerPel=32 Xresolution=1024 YResolution=768 Vrefresh = 60[GuiUnattended] AutoLogon = Yes AdminPassword = * OEMSkipRegional = 1 OEMSkipWelcome = 1 TimeZone= 201[identification] JoinWorkgroup=VTI[Networking] InstallDefaultComponents=Yes[RegionalSettings] Language = 0419 LanguageGroup=5,1 SystemLocale=00000419 UserLocale=00000419 UserLocale_DefaultUser = 00000419 InputLocale=0409:00000409, 0419:00000419 InputLocale_DefaultUser=0409:00000409[unattended] ExtendOemPartition =0 OEMSkipEula = Yes KeepPageFile = 0 UpdateInstalledDrivers = Yes[userData] ComputerName = * FullName = "OEM" OrgName = "BTG-OEM" ProductKey = "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"[GuiRunOnce] Command1="c:\windows\oem\mui.cmd" Command2="c:\windows\oem\factory.cmd" Command3="c:\windows\oem\all.cmd"-------------Txtsetup.oem-------------[Disks]d1 = "SiS Raid/IDE Driver Diskette", \disk.tag, \d2 = "SiS Raid/IDE Driver Diskette", \disk.tag, \d3 = "VMware SCSI Controller Installation Disk", \disk.tag, \d4 = "Intel Application Accelerator driver", \disk.tag, \[Defaults]scsi = SISRAID964_180scsi = SISRAID964_181scsi = VMSCSIscsi = iaStor[scsi]SISRAID964_180 = "WinXP SiS964 Raid Controller"SISRAID964_181 = "WinXP SiS180 Raid Controller"VMSCSI = "VMware SCSI Controller Installation Disk"iaStor = "Intel® 82801ER SATA RAID Controller";;;;;;;;;;;;;;;;;;;;;;;;;;;SiS 181;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;[Files.scsi.SISRAID964_180]driver = d1,SiSRaid.sys, SISRAIDcatalog= d1,Property.dllinf = d1,SiSRaid.infcatalog= d1,sisraid.cat[HardwareIds.scsi.SISRAID964_180]id="PCI\VEN_1039&DEV_0180", "SISRAID"[Config.SISRAID]value = parameters\PnpInterface,"5",REG_DWORD,1;;;;;;;;;;;;;;;;;;;;;;;;;;;SiS 181;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;[Files.scsi.SISRAID964_181]driver = d2,SiSRaid1.sys, SiSRaid1catalog= d2,Property.dllinf = d2,SiSRaid1.infcatalog= d2,sisraid.cat[HardwareIds.scsi.SISRAID964_181]id="PCI\VEN_1039&DEV_0181", "SiSRaid1"[Config.SiSRaid1]value = parameters\PnpInterface,"5",REG_DWORD,1;;;;;;;;;;;;;;;;;;;;;;;;; VMWARE ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;[Files.scsi.VMSCSI]driver = d3, vmscsi.sys, VMSCSIinf = d3, vmscsi.infcatalog = d3, vmscsi.cat[Config.VMSCSI]value = "", Tag, REG_DWORD, 5value = Parameters\PnpInterface, 5 ,REG_DWORD, 1value = Parameters\Device, NumberOfRequests, REG_DWORD, 128[HardwareIds.scsi.VMSCSI]id = "PCI\VEN_104B&DEV_1040", "VMscsi";;;;;;;;;;;;;;;;;;;;;;;;;;; 82801ER ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;[Files.scsi.iaStor]driver = d4, iaStor.sys, iaStorinf = d4, iaStor.infcatalog = d4, iaStor.cat[Config.iaStor]value = "", tag, REG_DWORD, 1bvalue = "", ErrorControl, REG_DWORD, 1value = "", Group, REG_SZ, "SCSI miniport"value = "", Start, REG_DWORD, 0value = "", Type, REG_DWORD, 1[HardwareIds.scsi.iaStor]id = "PCI\VEN_8086&DEV_24DF&CC_0104","iaStor"The END.P.S. Special thanks to Michael Waterman for RebootAfterComputerName = Yes Link to comment Share on other sites More sharing options...
Michael_W Posted November 29, 2004 Share Posted November 29, 2004 Hi,Thanks for the guide and specially for the credits :-)Mike Link to comment Share on other sites More sharing options...
stutch Posted June 16, 2005 Share Posted June 16, 2005 Awesome. I have been trying for almost 2 weeks to get a Dell 4600 to RIS. Thanks for the link to Intel's site, that was exactly what I needed to get things up and running!! You are the man.-CGS Link to comment Share on other sites More sharing options...
Bilou_Gateux Posted October 12, 2005 Share Posted October 12, 2005 (edited) Installing Windows Server 2003 on HP ProLiant Servers with RIS:HP ProLiant Servers uses specific NICs (based on Broadcom chipsets) and MassStorage (Adaptec, LSI and COMPAQ/HP Smart Array controllers)A good start is to download (free) the latest SmartStart CD ISO image containing all drivers for newest HP ProLiant Servers:SmartStartCurrent: HP SmartStart CD version 7.40 (9 Sep 05)WARNING 1:HP NC10xx/67xx/77xx/150x/320x/324x/325x/326x Gigabit Ethernet NIC Driver for Windows Server 2003Drivers located on <HP SmartStart CD>\compaq\drivers\wnet\q57xp32file that are to be placed in the RemoteInstall\Setup\Language\Images\WIN51IA.SP1\$OEM$\$1\drivers\net folder:q57win32.catq57win32.infq57xp32.sysfile that are to be placed in the RemoteInstall\Setup\Language\Images\WIN51IA.SP1\I386 folderq57xp32.sysq57win32.inf <<<editedRemove the [HPQ] section (see the following example):[HPQ]%NC320i% = NC320i.Inst, PCI\VEN_14e4&DEV_1659&SUBSYS_7032103c..%NC5750A1% = NC5750A1.Inst, PCI\VEN_14e4&DEV_1659&SUBSYS_7031103cRemove NTx86.5.1 in two locations (see the following example):[Manufacturer]Original Revised[Manufacturer] [Manufacturer]%HPQ% = HPQ, NTx86.5.1 %HPQ% = HPQ[HPQ.NTx86.5.1] [HPQ]edit RemoteInstall\Setup\Language\Images\WIN51IA.SP1\I386\templates\ristndrd.sif file[Unattended]DriverSigningPolicy = IgnoreNtUpgrade = NoWin9xUpgrade = NoOemPnPDriversPath = drivers\net;drivers\pnpdrvsOemPreinstall = YesOemSkipEula = YesOverwriteOemFilesOnUpgrade = NoDisableVirtualOemDevices = yesLegacyNIC = 1WARNING 2:HP Storage Controllers Driver for Windows Server 2003txtsetup.oem single file located on <HP SmartStart CD>\compaq\install\wnet*.* files for each controller listed in txtsetup.oem located on <HP SmartStart CD>\compaq\drivers\wnet\<controller> excluding txtsetup.oem file located on some <controller> subfolder and excluding NICs subfolders bxvbdx n100 n1000 q57xp32 file that is to be placed in the RemoteInstall\Setup\Language\Images\WIN51IA.SP1\$OEM$\textmode folderedit RemoteInstall\Setup\Language\Images\WIN51IA.SP1\I386\templates\ristndrd.sif file[OEMBootFiles] ADPU160M.SYS CPQARRY2.SYS CPQCISSM.SYS MegaIDE.sys Symmpi.sys LsiCsb6.sys HPCISSs2.sys TXTSETUP.OEM[OEM_Ads] Logo=Compaq.bmp[MassStorageDrivers] "Adaptec Ultra160 Family Manager Set"=OEM "Compaq Smart Array Controllers"=OEM "Smart Array 5x and 6x Controllers"=OEM "Integrated Ultra ATA-100 IDE RAID Controller (Windows 2000)"=OEM "LSI Logic Ultra320 1020/1030 Driver (Windows Server 2003)"=OEM "Carte h“te SCSI LSI Logic C8100 PCI"=RETAIL "Carte h“te SCSI LSI Logic C896 PCI"=RETAIL "Carte h“te SCSI LSI Logic C8xx PCI"=RETAIL "CD-ROM IDE (ATAPI 1.2)/Contr“leur IDE PCI"=RETAIL "CSB-6 Ultra ATA-100 IDE RAID Controller (Windows Server 2003)"=OEM "Smart Array SAS/SATA Controllers"=OEM "Adaptec RAID Controller"=OEMothers OEM Drivers:HP ProLiant iLO Advanced and Enhanced System Management Controller Driver for Windows 2000/Server 2003Drivers located on <HP SmartStart CD>\compaq\csp\nt\cp005397.exe SFX to extractHP ProLiant Integrated Lights-Out Management Interface Driver for Windows 2000/Server 2003Drivers located on <HP SmartStart CD>\compaq\csp\nt\cp005410.exe SFX to extractIntel 6300ESB Chipset Support for Windows 2000/Windows Server 2003Drivers located on <HP SmartStart CD>\compaq\csp\nt\cp004823.exe SFX to extractfile that are to be placed in the RemoteInstall\Setup\Language\Images\WIN51IA.SP1\$OEM$\$1\drivers\pnpdrvs folder Edited October 19, 2005 by Bilou_Gateux Link to comment Share on other sites More sharing options...
Anderz Posted January 23, 2006 Share Posted January 23, 2006 Still have a few problems, but this really got me started ... well done mate! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now