[sixpack]

hp38guser, on Jan 16 2005, 12:11 AM, said:

Update:

- now only skips lines beginning with ";"
- prevent compressing main inf and catalogfile

Thanks SixPack

Over an 100 downloads yet

your welcome
thanks for the update

EDIT: it did work correct now

[Mekrel]

just used the new one on the forceware 71.50 from leadtek and it kept creating loads and loads of subdirectories

Attached File(s)

•  folders.jpg (67.99K)
  Number of downloads: 162

[Ghost82]

Hi,

I downloaded the new version this morning but i keep getting this error on several (NOT ALL) drivers i try to compress...

       ++++++++++++++++++++++++++++++++++++++
                Driver Compressor Tool

                 ®2005 Klaas Nekeman
         ____________________________________
         msfn.org - for your unattended needs
        ++++++++++++++++++++++++++++++++++++++

        Setupfile:      W9X90XBC.INF

        Setup directory:        \Net\W9X90XBC.

        File:   W9X90XBC.INF
        1 bestand(en) gekopieerd.
        File:
.\Net\W9X90XBC.\
De syntaxis van de bestandsnaam, mapnaam of volumenaam is onjuist.
        0 bestand(en) gekopieerd.
sourcefile wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
-1_ wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
FINDSTR: kan :~0 niet openen
FINDSTR: kan -1_ niet openen
        File:
sourcefile wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
-1_ wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.

NOTE:
The above errors are in dutch but i'll try to translate it for you:

Quote

De syntaxis van de bestandsnaam, mapnaam of volumenaam is onjuist. = The Syntaxis of the filename, directory or volumename is incorrect

Quote

sourcefile wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
-1_ wordt niet herkend als een interne
of externe opdracht, programma of batchbestand.
FINDSTR: kan :~0 niet openen
FINDSTR: kan -1_ niet openen ==

sourcefile is not recognized as an internal or external command, program or batchfile.
-1_ is not recognized as an internal or external command, program or batchfile.
FINDSTR: can't open :~0
FINDSTR: can't open : -1_

guess something goes wrong here...

[Acheron]

Ghost82, what do you think this flag under my username means

Fixed this stupid thing now. The error happened when no catalogfile was found.

@Mekrel, what files are inside those new created directories. Please give me a link to those drivers

[sixpack]

hp38guser, on Jan 16 2005, 02:46 PM, said:

Ghost82, what do you think this flag under my username means 

Fixed this stupid thing now. The error happened when no catalogfile was found.

[Ghost82]

sixpack, on Jan 16 2005, 08:24 AM, said:

hp38guser, on Jan 16 2005, 02:46 PM, said:

Ghost82, what do you think this flag under my username means 

Fixed this stupid thing now. The error happened when no catalogfile was found.

I know, but I just wanted to get it clear for the others.

[sixpack]

Ghost82, on Jan 16 2005, 05:39 PM, said:

sixpack, on Jan 16 2005, 08:24 AM, said:

hp38guser, on Jan 16 2005, 02:46 PM, said:

Ghost82, what do you think this flag under my username means 

Fixed this stupid thing now. The error happened when no catalogfile was found.

I know, but I just wanted to get it clear for the others.

was niet lullig bedoelt

[Mekrel]

http://www.clanee.com/gfx/

in the folders are inf files, named the same as the folder they are in, the other files seem to be the same as whats in the other folders.

[Acheron]

Mekrel, no problems with your driver. You just have multiple inf's in your directory. You have to found out manually which driver you need.

[Mekrel]

ok thanks, but i think i got another problem

the 71.50s had some temp reading error so i decided to go back to 66.93,

instead of using the EXE i decided to test out the compressed ones using your tool, install went fine but since then people have recomended 71.20's so I have tried to uninstall the 66.93's but if i try device manager uninstall it says

"Error: failed to uninstall the device, the system may need it to boot"

And if i try via add/remove programes it says

"It appears the nvidea drivers have already been uninstalled, remove from the list?"

but i have nforce drivers which come under that catagory so in no circumstances unless i removed all chipset drivers too should this happen.

Thoughts?

[Acheron]

Mekrel, since you used the compressed nVidia drivers no additional system files are created. Therefore you don't need to go to the Software Configuration Panel to remove the drivers. Go to Device Manager, select your videocard and choose to uninstall the driver.
If you are just changing drivers in Windows you can select to update your driver in Device Manager and point the wizard to the location of the newly compressed driver.
I recommend everyone using my tool to first test the compressed driver this way before appending it to your unattended cd, so you don't get stuck.

[Mekrel]

hp38guser, on Jan 17 2005, 05:08 PM, said:

Mekrel, since you used the compressed nVidia drivers no additional system files are created. Therefore you don't need to go to the Software Configuration Panel to remove the drivers. Go to Device Manager, select your videocard and choose to uninstall the driver.
If you are just changing drivers in Windows you can select to update your driver in Device Manager and point the wizard to the location of the newly compressed driver.
I recommend everyone using my tool to first test the compressed driver this way before appending it to your unattended cd, so you don't get stuck.

Sorry my post states i did things the other way but i did infact try device manager first, then tried add/remove programes. The only reason i dont update is i like to run driver cleaner after uninstalling drivers but this isnt too much of a problem because like you said you can update via device manager without uninstalling the old ones first.

[PsiMoon314]

Hi Bâshrat the Sneaky

[QUOTE}@Bâshrat the Sneaky
I will definetely use cab compression for the winnt.sif method from now![/QUOTE]

Do you have any indication as to how much CD space this method might save?

Do you intend to use this in the next release of your Driver Packs or will you re-release the current ones shortly using this method?

Kind Regards

Simon

[Acheron]

Bashrat, happy birthday to you

Updated the Driver Compressor Tool with a new feature regarding to http://www.msfn.org/...showtopic=36827:

The subdir is now called as the Provider specified in the inf, so for unattended cd's you don't have to specify the full path anymore. I'm testing this now.

I'll see if I can work this out a bit more. If you want the old release you can mail me.

[Bilou_Gateux]

Nice new feature (provider instead of inf filename)

I haven't solved my problem with:
Intel® 865G, 865GV and 855GM chipsets featuring the newly enhanced Intel® Extreme Graphics 2.
FTP download ver #14.9 for 2K and XP

contains one Class Installer INF File

Class=Display

for installation of driver and a lot of class-specific "friendly name" INF File

Class=DisplayCodec

or

Class=IntelUnifiedDisplayDriver

that are required by the Class Installer INF File.

compress.cmd parse Class Installer INF File and class-specific "friendly name" INF File. Only the main Class Installer INF File need to be checked to build the compressed dir.
You can identify class-specific "friendly name" INF File by searching if exist a ClassInstall32 section

All details come from INF File Sections and Directives @MSDN library.

[Ghost82]

hp38guser, on Jan 20 2005, 02:14 PM, said:

Bashrat, happy birthday to you

Updated the Driver Compressor Tool with a new feature regarding to http://www.msfn.org/...showtopic=36827:

The subdir is now called as the Provider specified in the inf, so for unattended cd's you don't have to specify the full path anymore. I'm testing this now.

I'll see if I can work this out a bit more. If you want the old release you can mail me.

This new feature doesn't seem to work with multiple inf files (it states that the directory allready exists) I tested with the Creative Labs SoundBlaster Audigy 2 ZS WDM drivers...

[stevenp]

Hmm, i am trying to get the nForce 5.1 compressed, but wich inf do i need to take? :S There are a lot of them inside each folder...

[larciel]

can't get it to work w/ dell 1350 wireless driver.

[Acheron]

I reverted the changes, setting the Manfucturer as the drivers dir has no effect on the detection of drivers during Windows Setup.

For all you people having difficulties to get the right driver files, you can try to back-up your installed drivers with DriverGuide Toolkit or similar software.

After that you can compress the files for use on your unattended cd.

[Fonceur]

Nice little program! I haven't reinstalled with all my drivers compressed yet, but for the USB-UIRT driver found at:

http://www.usbuirt.com/support.htm

the .inf file also gets compressed...

Regarding the various software to backup existing drivers, your script does not seem to be compatible with the way Double Driver creates the .inf... Or maybe I just got unlucky with mine, all I get in the sub-folders are the .inf files, the actual .sys files or such are not touched at all.