[1to1]

Really

لالات لالالالب

[bl4ckb34r]

Hi guys
I install full Nero 6.6.0.8 on my system then copy folders and files that needed to my unattended XP installation, so on the new install system Nero are simply copy to hardrive. The result is I can burn DVDs, CDs just as normal (I am using this method for about 2 months without problems, I applied Force ASPI 1.7 as well). But the only thing I am wondering is when I use NeroInfoTool to check my ASPI driver, it says Nero ASPI doesnot install, is there any way to get around this? What .dll file is for Nero ASPI? Is it so important, but I did not see any problem with burning without it!!
Thanks.

[Xable]

Quote

we may be at the end of the road so to speak in attempting this method for custom installations.

Felix,
Just curious, what makes you say this?

[`Felix`]

Neanderthal, on Apr 13 2005, 04:21 AM, said:

Felix,
Just curious, what makes you say this?
<{POST_SNAPBACK}>

Hi Neanderthal, Because of some of the issues that had been popping up.

[Xable]

Oh Ok, i thought nero were going to change the installer or somthing. Thanx felix.

[iwod]

Just wondering if this is still getting updated? Features like Choose languages to intergrate into pack.

P.s New nero versoin is out.

[iwod]

i have a little problem which i could not figure out why. The installer doesn't create shortcut for the Nero Toolkits. However they were copied over. And i look at Post Config it seems nothing wrong with it. As it manage to create Nero and Nero Express Shortcut.

[dev2761]

Just my little tupenny worth, but after a very brief visit on a french forum I found out that all you have to is open the Nero install with winrar and modify the following in the archive comment....

;The comment below contains SFX script commands

Setup=setupx.exe /SFX /SILENT /SN=****-****-****-****-****-**** /WRITE_SN /NO_UI /NOCANCEL /NOREBOOT
TempMode
Silent=2
Overwrite=1
Title=Nero 6.6.0.12 - Nero AG

same goes for the language installer as well

;The comment below contains SFX script commands

Setup=Setup.exe /SFX /SILENT /NO_UI /NOCANCEL /NOREBOOT
TempMode
Silent=2
Overwrite=1
Title=Nero 6.6.0.12 French Language Installer

[iwod]

Um......... You do know that one of the ablity of thisprogram is to remove useless component from nero?

[Ctwizzy]

Which is the "better" method for Nero, Felix or Simonsays for a regular installation?

I know Felix's requires WinRAR to be installed, and Simonsays is just a SFX, im just curious?

[iwod]

Ctwizzy, on Apr 18 2005, 02:11 PM, said:

Which is the "better" method for Nero, Felix or Simonsays for a regular installation?

I know Felix's requires WinRAR to be installed, and Simonsays is just a SFX, im just curious?
<{POST_SNAPBACK}>

i can't remember correctly, but as far as i know there is only 2 method so far. 0 byte file to replace the orginal file and Felix method.

0 Byte no longers works with 6.x.x.8 or later.

[`Felix`]

Ctwizzy, on Apr 19 2005, 04:11 AM, said:

I know Felix's requires WinRAR to be installed, and Simonsays is just a SFX, im just curious?
<{POST_SNAPBACK}>

Sorry but that is incorrect - if you read the whole thread you would find that the requirement for winrar was removed at the last update of the scripts. You can use either winrar or 7-zip. - Just thought i would clear that up.

As for the best version... That would depend on your specific requirements and preferences. Try both and test, test, test and then you will know the answer to your valuable question.

[bober]

i get most of the shortcuts but none for the toolkit.

it's a very nice installer.

[eegor]

Hi,

I just got Nero 6 Ultra (full version) on CD because I was tired of problems that Roxio seemed to be causing.

Does anyone know if it's possible to use the custom install builder to do a custom install of this distribution of Nero? I emailed Felix about this, and he was kind enough to suggest that I could copy the files from the CD to my hard drive and follow the directions. Unfortunately, the CD doesn't contain a Nero-6xxx.exe file. There is a Nero.exe file, only 14 MB, compared to the download file's 33 MB. Also, reading the manual, implies that the optional components (Cover Designer, Wave Editor, etc.) must be included in the downloaded Nero-*.exe file, but on the CD, each is in a separate directory, with multiple files and subdirectories. This doesn't look compatible with Nero Custom installer to me, but I hope I'm wrong.

If I can't use the Custom Installer, does anyone have another way to install just the components I want, and avoid a bunch of bloat that I don't need? I've tried searching these forums, but haven't found anything.

If all else fails, can I use the serial number from my CD with the downloaded version.?

Finally, I also want to install InCD 4, but I can't find anything about it in the documentation. or by searching the forums.

I'd really appreciate any help I can get, even if it's just confirmation that I'll have to install the whole, package to get what I want. (Sigh)

Thank you all very much.

[`Felix`]

eegor, on Apr 22 2005, 12:08 PM, said:

Hi,

I just got Nero 6 Ultra (full version) on CD because I was tired of problems that Roxio seemed to be causing.

Does anyone know if it's possible to use the custom install builder to do a custom install of this distribution of Nero? I emailed Felix about this, and he was kind enough to suggest that I could copy the files from the CD to my hard drive and follow the directions. Unfortunately, the CD doesn't contain a Nero-6xxx.exe file. There is a Nero.exe file, only 14 MB, compared to the download file's 33 MB. Also, reading the manual, implies that the optional components (Cover Designer, Wave Editor, etc.) must be included in the downloaded Nero-*.exe file, but on the CD, each is in a separate directory, with multiple files and subdirectories. This doesn't look compatible with Nero Custom installer to me, but I hope I'm wrong.

If I can't use the Custom Installer, does anyone have another way to install just the components I want, and avoid a bunch of bloat that I don't need? I've tried searching these forums, but haven't found anything.

Ok you will need a modified script to do this... i will have a look at it and post one for you soon. Edit I will send you a PM with the updated file.

Quote

If all else fails, can I use the serial number from my CD with the downloaded version.?

yes you should be able to (as long as you have a full version CD and not the OEM version)

Quote

Finally, I also want to install InCD 4, but I can't find anything about it in the documentation. or by searching the forums.

what did you want to know about InCD?

[eegor]

Thanks for the information, Felix. I'll reply to your PM right away.

Please ignore my question about InCD. I had forgotten that it has a separate installer on the CD. No problem.

[teks]

hi around

I thougth you are all cracks in your way and did a great job

So, these are my first stepps.

By creating the Nero Custom Build pops an error from winrar ho says, that the
NERO-rar.sfx file is wrong or wrong format?? So i changed it from my folder C:\Programme, caus i used a german one, but also pops an error?
I edit the the needed and !Makeit.cmd set lang=eng to setlang=deu, then eng,
but also pops an error?
I use new Nero-6.6.0.12.exe, NVE-3.1.0.0.exe.
and use winrar3.42 and 3.5 beta 3! both with errors!
So, what is it? Can anyone help me?

Thanks, teks


I see the great Wood, but not the tree!

[Egon's Dragon]

Hi,

I'm a newbie here, please be patient with me I've found this page about Nero Custom Install Builder because I have 6.6.0.6 Ultra and hate all the extra crap. I just want Burning Rom. I've tried the Custom Install Builder, added the dash to Nero*.exe, and the MakeIt.cmd was working, was building the installer, then stopped and there's no file anymore in my Ahead folder. I don't get it. The file was .751 or something, then disappeared. Any ideas? Please help me.

EDIT: Nevermind!! I'm a dumbass. I checked my WinRAR settings and it saved the archive....oh nevermind. No problems, worked like a charm! Awesome little program, Felix. THANK YOU!!

[Egon's Dragon]

OK, now I DO have a problem. I've done the custom install of Nero only, along with Tool Kit. Now, during the burning process I get "Unknown BurnPhase" when it should be "writing to disc" or something, and when it finishes, it should say "files written" or whatever, but I get the same "Unknown Burnphase". But, the burn IS successful. Strange. This hadn't happened on the full installation. Did I leave out something in the custom install? I can't imagine. Any ideas??

[Xable]

Quote

Now, during the burning process I get "Unknown BurnPhase" when it should be "writing to disc" or something, and when it finishes, it should say "files written" or whatever, but I get the same "Unknown Burnphase". But, the burn IS successful.

I have always got the "Unknown BurnPhase" with Nero Custom Install Builder. Someone said it was nero`s fault because ppl using an unmodified installer get the error aswell, but i have just used vcBlackBox`s NCAB and i don`t get the error!
If i install nero with vcBlackBox`s guide and then install nero with felix`s guide over the top i don`t get the "Unknown BurnPhase".
So i think that there must be some missing reg entries or files.
Egon's Dragon, can you give vcBlackBox`s guide a try and see if you still get the error.

Felix, maybe you could compare your nero stripper with vcBlackBox`s. I`ve had a look and can`t get my head round it.