MSFN Forum: Can't With Winpe2004 - MSFN Forum

Jump to content

New user? Register Now!

Help

Unattended CD/DVD Guide Homepage · MSFN Forum Rules

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

Can't With Winpe2004 On an IBM Netvista 6578-RAF Rate Topic:

#1 johnbreton

Newbie

Group: Members
Posts: 49
Joined: 25-February 05

Posted 18 March 2005 - 07:26 AM

I have a IBM Netvista 6578-RAF and I can't boot woth WinPe.

It is working fine with other newer model of IBM but not the Netvista.
The Netvista are still good machine (PIII, 512 meg RAM)

What is happpening exactly is that I start booting from the CD,
- The process of "setup is inspecting your computer" starts
- Then the "Starting Windows Preinstalation Environnement" start
Then right at the end, it reboots.

Anyone has seen this ??

Thanks for any help

John

#2 ChrisBaksa

Member

Group: Members
Posts: 230
Joined: 05-March 04

Posted 22 March 2005 - 07:44 AM

Sounds like you don't have a mass controller driver.
IBM is notorious for revving the drivers every other week.

Make sure you have firmware and driver in lock step.

Chris