ohad Posted April 7, 2005 Share Posted April 7, 2005 Hi,I'm trying to add to my networked installtion share the drivers that I need for unattneded setup.I have quite a lot of diffrent HW, which makes it impossible to adapt every answer file with the relevant hw.is there a way to implement the drivers into w2k3 directory?i tried to add the drivers to txtsetup.sif according to the data from greenmachines but it didnt copy the drivername.sys file, and prompt in the text mode that its missing.I'm using bartpe based installtion, so I have to use winnt32 /syspart /tempdrive...my txtsetup.sif entries (that i've added are:)[sourceDisksFiles]megaide.sys = 1,,,,,,3_,4,1[HardwareIdsDatabase]PCI\VEN_8086&DEV_25b0&SUBSYS_10341734 = "MEGAIDE"PCI\VEN_8086&DEV_25b0&SUBSYS_10401734 = "MEGAIDE"PCI\VEN_8086&DEV_25b0&SUBSYS_10731734 = "MEGAIDE"PCI\VEN_8086&DEV_2652&CC_0104 = "MEGAIDE"[sCSI.load] megaide = megaide.sys,4[sCSI]megaide = "LSI Logic Embedded SATA RAIDany idea?thanksohad Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted April 7, 2005 Share Posted April 7, 2005 You'll also have to add it to dosnet.inf to get it to work with BartPE or network installations Link to comment Share on other sites More sharing options...
ohad Posted April 7, 2005 Author Share Posted April 7, 2005 ahahhaa.. any special syntex?thanks,Ohad Link to comment Share on other sites More sharing options...
ohad Posted April 7, 2005 Author Share Posted April 7, 2005 Hi,This solves the problem in the first text mode stage (loading drivers)but when setups move to copying drivers it fails again.looks like it require a 3rd place? thanks,ohad Link to comment Share on other sites More sharing options...
Bâshrat the Sneaky Posted April 7, 2005 Share Posted April 7, 2005 Then add them to drvindex.inf as well.Didn't you get any error? Link to comment Share on other sites More sharing options...
ohad Posted April 8, 2005 Author Share Posted April 8, 2005 no besides the the file is missing....Do you know where I can get more information about what is each file rule in the setup process?thanks Link to comment Share on other sites More sharing options...
Bilou_Gateux Posted April 8, 2005 Share Posted April 8, 2005 I have already post the answer to this question here:Copy File With Setup Under WindowsDetails about my specific Z310 server which use an onboard LSI MegaIDE RAID controller Link to comment Share on other sites More sharing options...
ohad Posted April 8, 2005 Author Share Posted April 8, 2005 Ok, finally I've got it to work.it seems that I had to mention the driver twice in the dosnet.inf once for the textmode loading the driver (or to copy the driver to the textmode area)and second the copy the driver between the textmode installtion and the gui startup.I only had to do that because I started winnt32 with /sysprep /tempdrive(I had to do that in order to use my network boot (PXE tftp) bartpe)thanks alot for everyoneOhad Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now