Jump to content

Maximus-Decim Native USB Drivers


Recommended Posts

Maximus Decim Native USB ver.3.2

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.2 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

-----------------------------------------------------------------------------------------------------------------------

English: http://rapidshare.com/files/66648662/nusb32e.exe.html

Russian: http://rapidshare.com/files/66648597/nusb32r.exe.html

What's new?

*Add USB FDD + DISKTSD.VXD 4.90.3001

*Fix USB2.IFX for ATI chipsets

*explorer.exe ver 4.72.3612.1700

Czech build Maxim Decimus NUSB v. 3.2 czech.gif(only for czech version Windows 98 SE)

http://www.winpack.org/download.php?soubor=26 :hello:

thx Maxim Decimus!

Link to comment
Share on other sites


Hmmm .....

Thank you dencorso for your hints but I figured that one out earlier while doing some reading up and digging around for clues ...

I am pleased to report that the native ms usbhub20.sys driver is now working with windows 98 FE .....

I was snooping into via usb2.0 hub driver headers and after comparing with ms usb2.0 hub driver, I concluded that they're were both from the same base reference material (plus minus bug fixes etc etc). My guess was confirmed later on when I verified that all function calls are the same except WMI calls ... so that's where the difference is and its enough to break it ...

I'm planning to update nusb for windows 98 FE soon ..... the planned changes will be :

1. Using UMSS.SYS compiled from MS sample reference driver. I concluded that usbstor.sys will not work on W98FE due to different function calls to ntoskrnl (available only from W98SE upwards). The working replacement was found at http://sweetlow.at.tut.by/download/umss.zip

2. Minor changes to get MS usbhub20.sys loaded correctly on win98 FE ...

3. Updated explorer.exe to match nusb3.2

4. Updated DISKTSD.VXD (4.90.3000) for possible usb fdd support ?

5. Generic W98FE driver support for usb fdd. There's many drivers flying around but I believe there's a generic version that will work on nec and mitsumi drives. This is still unverified as I'm waiting to get my hands on a usb fdd to tryout.

6. Please comment if I should include the ATI usb2 fix (to match nusb3.2) ...

I'll be putting the update on hold until I can verify usb fdd can properly work ...

Rgds

Link to comment
Share on other sites

Maximus Decim Native USB ver.3.2

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.2 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

-----------------------------------------------------------------------------------------------------------------------

English: http://rapidshare.com/files/66648662/nusb32e.exe.html

Russian: http://rapidshare.com/files/66648597/nusb32r.exe.html

What's new?

*Add USB FDD + DISKTSD.VXD 4.90.3001

*Fix USB2.IFX for ATI chipsets

*explorer.exe ver 4.72.3612.1700

French Maxim Decimus NUSB 3.2 :

avaible as usual at : win9x4ever.online.fr

Maximus, you rock man! And lots of thanks to Dencorso too! :yes:

(by the way, nice idea the little flag Philco. I might just do the same some day...)

Link to comment
Share on other sites

[...]I am pleased to report that the native ms usbhub20.sys driver is now working with windows 98 FE ..... [...]

4. Updated DISKTSD.VXD (4.90.3000) for possible usb fdd support ?

5. Generic W98FE driver support for usb fdd. There's many drivers flying around but I believe there's a generic version that will work on nec and mitsumi drives. This is still unverified as I'm waiting to get my hands on a usb fdd to tryout.

6. Please comment if I should include the ATI usb2 fix (to match nusb3.2) ... [...]

Way to go, PassingBy! :thumbup

regarding your questions:

4 and 5. The patched DISKTSD.VXD (4.90.3000) ought to work OK in Win 98FE. I think no other driver will be required, besides the NUSB files and DISKTSD.VXD. If not, consider, as the first step, adding CDVSD.VXD 4.90.0.3003, previously patched by the same method to change version. I know it works OK in Win 98SE. I'm using both right now.

6. I think so, yes.

Keep on the great work! :yes:

Link to comment
Share on other sites

Maximus Decim Native USB ver.3.2

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.2 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

German Maximus Decim NUSB 3.2:

http://www.nandlstadt.com/downloads.htm

Link to comment
Share on other sites

Where do I find these two files? I want to find the Danish version of the files.

advpack.dll 4.72.3612.1700

explorer.exe 4.72.3612.1700

You'll find them in the .CABs inside the Danish version of MSIE401SP2.EXE, possibly also inside older versions of Internet Explorer 4.

advpack.dll 4.72.3612.1700 is inside ACTSETUP.CAB

explorer.exe 4.72.3612.1700 is inside IE4SHL95.CAB or, if you want the NT version, inside IE4SHLNT.CAB

BTW, you'll also find the same version of explorer.exe in all versions of Internet Explorer 5, up to IE55SP2.EXE,

but, then, the version of advpack.dll to be found will be higher than the one you asked.

HTH

Edited by dencorso
Link to comment
Share on other sites

Could someone repost the English package to a decent host that I can actually download from? I've had enough posting and reposting that that stupid RapidShare has something that always tells me I'm already downloading from my IP although I'm NOT.

Thank you.

Nevermind, I had a friend download it for me. Thanks anyway.

(later edit) Thank you for the link below.

Edited by Drugwash
Link to comment
Share on other sites

Could someone repost the English package to a decent host that I can actually download from? I've had enough posting and reposting that that stupid RapidShare has something that always tells me I'm already downloading from my IP although I'm NOT.

Thank you.

Nevermind, I has a friend download it for me. Thanks anyway.

All versions are available at http://www.technical-assistance.co.uk/kb/usbmsd98.php

Link to comment
Share on other sites

I love this patch! :thumbup

My portable 320GB USB2 hard disk was detected without a hitch :D

For those interested, I had to use the freeware SwissKnife 3.22 to format the drive from NTFS (how it arrived) to a single FAT32 partition.

http://www.download.com/CompuApps-SwissKni...8-10070864.html

Not sure if I could have done that under Win98. I did it under WinXP.

Note: WinXp's built in Format facility will not allow FAT32 partitions bigger than 32GB.

Link to comment
Share on other sites

Hi, maximus-decim!

While poring over an .INF provided by Mitsumi for their USB FDD, I believe I found another brand of USB FDD that is not yet included in NUSB: the "EKE USB Floppy", which has VID_049f&PID_0054. The .INF file in question is attached for you to check whether I'm right or not, since you're much more knowledgeable about .INFs than myself. NUSB rules! :yes: Keep on the great work! :thumbup

PUSBSTSM.INF

Edited by dencorso
Link to comment
Share on other sites

NUSB 3.20 for Windows 98 First Edition (stable) have been released !

Please refer to post #350 : http://www.msfn.org/board/?showtopic=43605&st=349 for updates.

French NUSB 3.20 for Windows 98 First Edition france.gif

Avaible as usual at : win9x4ever.online.fr

Thanks a lot PassingBy !!! Now everyone can enjoy NUSB...

(and thanks Philco for the little flag) :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...