maximus-decim

Maximus-Decim Native USB Drivers

803 posts in this topic

Maximus Decim Native USB ver.3.5 and 3.6
------------------------------------------------------------------------

See Post #772

 

 

Maximus Decim Native USB ver.3.3
------------------------------------------------------------------------
*Native (without installation of additional drivers for each type) support USB flash drives, digital photo
and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.
1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.3 and reboot.
5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.
Remember! You install it at own risk!
-----------------------------------------------------------------------------------------------------------------------
English: nusb33e
Russian: nusb33r

What's new?
*Add CDVSD.VXD 4.90.3004
*USBSTOR.INF 1.08 - add EKE USB Floppy (VID_0424&PID_0FDC), add USBCompliance (for usbu2a.sys), small fix for USB FDD

Maximus Decim Native USB ver.3.2
------------------------------------------------------------------------
English: nusb32e
Russian: nusb32r

 

What's new?
*Add USB FDD + DISKTSD.VXD 4.90.3001
*Fix USB2.INF for ATI chipsets
*explorer.exe ver 4.72.3612.1700

Maximus Decim Native USB ver.3.1
------------------------------------------------------------------------
English: nusb31e
Russian: nusb31r

 

What's new?
*Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys
*CnMemore replaced Skymedi

0

Share this post


Link to post
Share on other sites

Thanks for the Great work.

I've been trying to make it work on my Japanese Win98se.

I just want to report that finally, I got it work! Yes!!

The trick is that after installing Maximus Decim's patch, I replaced user.exe and user32.dll in system directory with Japanese WinME (4.90.3000) files.

(with manually updated ie6sp1 and xpsp2 tricks by MDGx. I don't know how these affect above system files, though.)

Interface is still English, but it works perfect. :thumbup

0

Share this post


Link to post
Share on other sites

Hi Maximus,

I tried 2.1 and it worked for my Fuji camera, except I would get an additional prompt asking me to use the taskbar icon to STOP the camera first...

In connecting/disconnecting the camera, there is no harm, so is there a way to get rid of the prompt?

Also (and more important), I have an older Visioneer 7600 USB scanner that 2.1 didn't work with...will 2.2 work with it?

0

Share this post


Link to post
Share on other sites
Also (and more important), I have an older Visioneer 7600 USB scanner that 2.1 didn't work with...will 2.2 work with it?

These drivers are not for all USB devices, jasinwa. They're only for storage based USB devices such as flash disks, cameras.

0

Share this post


Link to post
Share on other sites

thx Gape...got it...it was hard for me to know, as it is noted in maximus-decim's post

....and similar devices.

I figured a USB scanner is a similar device!!

but I understand it is a storage device....so it is Ok to run usb2.2 along with my scanner driver...

thx!

0

Share this post


Link to post
Share on other sites

i can't get this driver.

the address isn't working.

can you give me another ?

thx!!!

0

Share this post


Link to post
Share on other sites

Maximus

My hard drive in IDE to USB-2 external enclosure is working very well with your driver.

When I changing it with DVD burner LG 4163b, Win98SE can't recognize it.

Any suggestion?

0

Share this post


Link to post
Share on other sites

Hi Maximus,

I think it would be good to separate this language independent USB driver from language dependent Q242975 hotfix, what do you think?

This would mean that the USB driver could be used on any langauge version Windows.

Petr

0

Share this post


Link to post
Share on other sites

maybe he should support all usb flash drives and cameras,that would be simple and ppl would install it.

0

Share this post


Link to post
Share on other sites
Maximus

My hard drive in IDE to USB-2 external enclosure is working very well with your driver.

When I changing it with DVD burner LG 4163b, Win98SE can't recognize it.

Any suggestion?

is it works in another WinOS (ME/2K/XP/2K3) without any addon driver?

in order to make it working i need the next info from any other OS where it works:

1. Run regedit.

2. Export into reg-files the next brunches from the registry (XP/2K/2K3):

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USBSTOR

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB

3. Zip regs and send 'em here

0

Share this post


Link to post
Share on other sites

Hello Maximus,

I have problems with this USB package and Mitsumi USB Floppy drive.

The system is freshly installed Windows 98 SE + drivers + SE SP 2.0 RC3 + NUSB2.2, motherboard is i845 chipset with ICH-4 southbridge.

When I insert this floppy into USB connector, at first looks like at least twe drivers are properly recognized, but then BSOD appears with message:

A fatal Exception 00 has occured at 0028:C1C24DD4 in VXD DiskTSD(03) + 00011EB4 - the current application will be terminated.

After reboot there is yellow exclamation mark at USB Floppy Disk in Storage devicess class in Device manager.

If I remove the driver from device manager, an re-insert the USB connector, the blue screen appaered again.

What is installed in registry:

[HKEY_LOCAL_MACHINE\Enum\USB\VID_03EE&PID_6901\INST_0]

"Capabilities"=hex:14,00,00,00

"HardwareID"="USB\\VID_03EE&PID_6901&REV_0100,USB\\VID_03EE&PID_6901"

"CompatibleIDs"="USB\\CLASS_08&SUBCLASS_04&PROT_00,USB\\CLASS_08&SUBCLASS_04,USB\\CLASS_08"

"DeviceDesc"="Mitsumi USB Floppy"

"ClassGUID"="{36FC9E60-C465-11CF-8056-444553540000}"

"Class"="USB"

"Driver"="USB\\0013"

"upperfilters"="USBNTMAP.SYS"

"Mfg"="Microsoft"

"ConfigFlags"=hex:00,00,00,00

"Serial"=hex:0c,00,00,00,00,00,00,00

"SymbolicName"="\\DosDevices\\000000000000000c#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"

[HKEY_LOCAL_MACHINE\Enum\USBSTOR\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\USB&VID_03EE&PID_6901&INST_0]

"Capabilities"=hex:14,00,00,00

"HardwareID"="USBSTOR\\SFLOPPYMITSUMI_USB_FDD_________1050,USBSTOR\\SFLOPPYMITSUMI_USB_FDD_________,USBSTOR\\SFLOPPYMITSUMI_,USBSTOR\\MITSUMI_USB_FDD_________1,MITSUMI_USB_FDD_________1,USBSTOR\\GENSFLOPPY,GENSFLOPPY,USBSTOR\\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050"

"CompatibleIDs"="USBSTOR\\SFLOPPY,USBSTOR\\RAW"

"DeviceDesc"="USB Floppy Disk"

"Class"="Storage"

"Driver"="Storage\\0004"

"Mfg"="Generic"

"ConfigFlags"=hex:00,00,00,00

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\USB\0013]

"DevLoader"="*NTKERN"

"NTMPDriver"="USBSTOR.SYS"

"DriverFlags"=dword:00000002

"InfPath"="USBSTOR.INF"

"InfSection"="USBSTOR_CBI"

"ProviderName"="Microsoft"

"DriverDate"=" 4-11-2005"

"DriverDesc"="Mitsumi USB Floppy"

"MatchingDeviceId"="USB\\VID_03EE&PID_6901"

[HKEY_DYN_DATA\Config Manager\Enum\C29A52C0]

"HardWareKey"="USB\\VID_03EE&PID_6901\\INST_0"

"Problem"=hex:00,00,00,00

"Status"=hex:ce,6a,88,19

"Allocation"=hex:00,04,00,00,00,00,00,00,00,00,00,00

"Child"=hex:e0,68,a1,c2

"Sibling"=hex:00,00,00,00

"Parent"=hex:30,50,a1,c2

[HKEY_DYN_DATA\Config Manager\Enum\C2A168E0]

"HardWareKey"="USBSTOR\\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\\USB&VID_03EE&PID_6901&INST_0"

"Problem"=hex:0b,00,00,00

"Status"=hex:a6,6e,00,18

"Allocation"=hex:00,04,00,00,00,00,00,00,00,00,00,00

"Child"=hex:00,00,00,00

"Sibling"=hex:00,00,00,00

"Parent"=hex:c0,52,9a,c2

With Windows XP and with Mitsumi supplied driver and Windows 98 SE everything works without any problems.

Also several various USB flashdisks works fine with NUSB2.2 on the same computer.

Any idea?

Petr

0

Share this post


Link to post
Share on other sites

The same BSOD on completely different configuration and the same Mitsumi floppy drive - ICH-2 USB, Czech version of Windows 98 SE.

Any idea how to solve the problem? This floppy drive is explicilty written in the original Win ME INF file, so it should be supported. I will also try to install Windows ME to see if it really works.

Petr

0

Share this post


Link to post
Share on other sites

Petr

it's a really strange problem - Mitsumi USB Floppy with id VID_03EE&PID_6901 - it should be supported.

All info from the registry provided here is quite correct.

Have U Disktsd.vxd ver. 4.10.2223 installed? If not - try this one, if so and it does not working, try to replace it with WinME version.

Unfortunately i don't have Mitsumi USB Floppy to check this one by myself...

0

Share this post


Link to post
Share on other sites

Yes, I have version 4.10.2223. With version 4.90.3000 windows won't boot.

0

Share this post


Link to post
Share on other sites

Petr

bad news :}

have U compared registry info from WinSE and WinXP for Mitsumi?

0

Share this post


Link to post
Share on other sites
Petr

bad news :}

have U compared registry info from WinSE and WinXP for Mitsumi?

It is absolutely different. Now I prepare installation of WinME.

Petr

0

Share this post


Link to post
Share on other sites

So the Misumi USB Floppy drive works well on freshly installed Windows ME.

I have compared registers and nothing very special found. Here are some differences but I don't know what they mean - if anything:

Win98 SE + nusb2.2

[HKEY_LOCAL_MACHINE\Enum\USBSTOR\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\USB&VID_03EE&PID_6901&INST_0]

"Capabilities"=hex:14,00,00,00

WinME:

[HKEY_LOCAL_MACHINE\Enum\USBSTOR\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\USB&VID_03EE&PID_6901&INST_0]

"Capabilities"=hex:00,00,00,00

Win98 SE + nusb2.2

[HKEY_DYN_DATA\Config Manager\Enum\C2A168E0]

"HardWareKey"="USBSTOR\\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\\USB&VID_03EE&PID_6901&INST_0"

"Problem"=hex:0b,00,00,00

WinME:

[HKEY_DYN_DATA\Config Manager\Enum\C1C798F0]

"HardWareKey"="USBSTOR\\SFLOPPY&VEN_MITSUMI&PROD_USB_FDD&REV_1050\\USB&VID_03EE&PID_6901&INST_0"

"Problem"=hex:00,00,00,00

What to try next?

Petr

0

Share this post


Link to post
Share on other sites

Hello Hello,

I'm pretty much ignant about USB stuff....

If I were to exe this on an old PC that has USB 1.1 hardwired into the mobo, will that get it to work with all USB 2.0 devices? I just had a hassle with iPod mini 1.3 recently, trying to get it to work with Win 98 and USB 1.1 ....got it to work, but ended up getting a cheap USB 2.0 PCI card (and had to format the iPod on an XP system)

...would this Native USB ver.2.2 have somehow done the trick with the iPod mini, on a system that had 1.1 USB?

Any reading material that would enlighten me further to what this does, how it does it, etc, would be appreciated. Or is that included in the downloadable exe file?

0

Share this post


Link to post
Share on other sites

ah, FLASH devices...so it wouldn't do jack for an iPOD then, since thats a disc device?

0

Share this post


Link to post
Share on other sites

Petr

i think U've tried to correct registry like in WinMe...

some questions:

1. have U tried to install NUSB on fresh install of win98se without any SP?

2. have U installed NUSB in a system with previously installed original Mitsumi usb drivers or any other USB drivers? In any case any other drivers should be removed before install NUSB, and, of course it's very important to clear registry (USBSTOR and USB sections), especially if NUSB1.0-1.3 was installed before.

... and ... i have a dream to touch it with my hands :)

very strange situation :blink:

0

Share this post


Link to post
Share on other sites
ah, FLASH devices...so it wouldn't do jack for an iPOD then, since thats a disc device?

try it - in the most cases it works, of course if U have installed English Win98SE :)

0

Share this post


Link to post
Share on other sites

I have problems with a Sweex 16-in-1 card reader:

It makes use of a USBSys9x.SYS file as 2.0 Card Reader device. System hangs when the device is connected and this driver is not installed:

Here's the inf and sys file attached. It's useful to include.:

[Version]
Signature="$CHICAGO$"
Class=USB
provider=%VENDOR%

[Manufacturer]
%MfgName%=GENERIC

[GENERIC]
%USB\VID_0DDA&PID_0001.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0001
%USB\VID_0DDA&PID_0002.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0002
%USB\VID_0DDA&PID_0003.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0003
%USB\VID_0DDA&PID_0005.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0005
%USB\VID_0DDA&PID_0008.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0008
%USB\VID_0DDA&PID_0009.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0009
%USB\VID_0DDA&PID_000A.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_000A
%USB\VID_0DDA&PID_000B.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_000B
%USB\VID_0DDA&PID_1001.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_1001
%USB\VID_0DDA&PID_0101.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0101
%USB\VID_0DDA&PID_0102.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0102
%USB\VID_0DDA&PID_0301.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0301
%USB\VID_0DDA&PID_0302.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_0302
%USB\VID_0DDA&PID_2001.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2001
%USB\VID_0DDA&PID_2002.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2002
%USB\VID_0DDA&PID_2003.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2003
%USB\VID_0DDA&PID_2005.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2005
%USB\VID_0DDA&PID_2006.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2006
%USB\VID_0DDA&PID_2007.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2007
%USB\VID_0DDA&PID_2008.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2008
%USB\VID_0DDA&PID_2013.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2013
%USB\VID_0DDA&PID_2014.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2014
%USB\VID_0DDA&PID_2023.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2023
%USB\VID_0DDA&PID_2024.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2024
%USB\VID_0DDA&PID_2026.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2026
%USB\VID_0DDA&PID_2027.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2027
%USB\VID_0DDA&PID_2321.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2321
%USB\VID_0DDA&PID_2318.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2318
%USB\VID_0DDA&PID_2315.DeviceDesc%=USBSYS9X.Dev,USB\VID_0DDA&PID_2315

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
USBSYS9X.Files.Ext=10,System32\Drivers
usbdsk9x.Files.Ext=12

[USBSYS9X.Dev]
CopyFiles=USBSYS9X.Files.Ext,usbdsk9x.Files.Ext
AddReg=USBSYS9X.AddReg

[USBSYS9X.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,USBSys9x.SYS

; 0(default) indicate all disks are removable disk.
; 1 indicate this first disk is floppy, the others are removable disk.
; 2 indicate this second disk is floppy, the others are removable disk.
HKLM,"Enum\USBSYS9X\DISK",,0x00000,0  
;HKLM,"Enum\USBSYS9X\DISK",,0x00000,1  
;HKLM,"Enum\USBSYS9X\DISK",,0x00000,2  

HKR,,EnumPropPages,,storpg98.dll
;HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Class\USB\0087

[USBSYS9X.Dev.HW]
AddReg=USBSYS9XHWAddReg

[USBSYS9XHWAddReg]
HKR,,DriverVersion,,"V1.0"
HKR,,FirmwareBCD,,"V1.0"

[USBSYS9X.Files.Ext]
;USBSys9x.sys

[SourceDisksNames]
1000="USB Driver Disk","",,

[SourceDisksFiles]
USBSYS9X.SYS=1000
USBDSK9X.PDR=1000

;---------------------------------------------------------------;

[Strings]
VENDOR="GENERIC"
MfgName="GENERIC"

USB\VID_0DDA&PID_0001.DeviceDesc="Multi-Card Reader 6in1"
USB\VID_0DDA&PID_0002.DeviceDesc="Multi-Card Reader 7in1"
USB\VID_0DDA&PID_0003.DeviceDesc="Flash Disk"
USB\VID_0DDA&PID_0005.DeviceDesc="Internal Multi-Card Reader 6in1"
USB\VID_0DDA&PID_0008.DeviceDesc="SD Single Card Reader"
USB\VID_0DDA&PID_0009.DeviceDesc="MS Single Card Reader"
USB\VID_0DDA&PID_000A.DeviceDesc="MS+SD Dual Card Reader"
USB\VID_0DDA&PID_000B.DeviceDesc="SM Single Card Reader"
USB\VID_0DDA&PID_1001.DeviceDesc="Multi-Flash Disk"
USB\VID_0DDA&PID_0101.DeviceDesc="All-In-One Card Reader"
USB\VID_0DDA&PID_0102.DeviceDesc="All-In-One Card Reader"
USB\VID_0DDA&PID_0301.DeviceDesc="MP3 Player"
USB\VID_0DDA&PID_0302.DeviceDesc="MultiCard MP3 Player"
USB\VID_0DDA&PID_2001.DeviceDesc="Multi-Card Reader"
USB\VID_0DDA&PID_2002.DeviceDesc="Q018 default PID"
USB\VID_0DDA&PID_2003.DeviceDesc="Multi-Card Reader"
USB\VID_0DDA&PID_2005.DeviceDesc="Multi-Card Reader"
USB\VID_0DDA&PID_2006.DeviceDesc="All-In-One Card Reader"
USB\VID_0DDA&PID_2007.DeviceDesc="USB 2.0 to ATAPI bridge"
USB\VID_0DDA&PID_2008.DeviceDesc="All-In-One Card Reader"
USB\VID_0DDA&PID_2013.DeviceDesc="USB 2.0 SD/MS Combo Card Reader"
USB\VID_0DDA&PID_2014.DeviceDesc="USB 2.0 SD/MS Single Card Reader"
USB\VID_0DDA&PID_2023.DeviceDesc="USB 2.0 card reader SD/MS DEMO board with ICSI brand name (MaskROM version)"
USB\VID_0DDA&PID_2024.DeviceDesc="USB 2.0 card reader SD/MS DEMO board with Generic brand name (MaskROM version)"
USB\VID_0DDA&PID_2026.DeviceDesc="USB 2.0 card reader DEMO board with ICSI brand name (MaskROM version)"
USB\VID_0DDA&PID_2027.DeviceDesc="USB 2.0 card reader DEMO board with Generic brand name (MaskROM version)"
USB\VID_0DDA&PID_2321.DeviceDesc="USB 2.0 UFD MP3 player"
USB\VID_0DDA&PID_2318.DeviceDesc="USB 2.0 UFD MP3 player (model 1)"
USB\VID_0DDA&PID_2315.DeviceDesc="USB 2.0 UFD MP3 player (model 2)"

USBSYS9X.zip

0

Share this post


Link to post
Share on other sites
Here's the inf and sys file attached. It's useful to include.:

good idea, but it should be tested before,

from that inf i can't understand what type of devices is described in - BulkOnly, CB or CBI and what protocol is used.

to describe it in inf i need CompatibleIDs values for each device from the inf U've provided, something like that:

DeviceDesc = USB Mass Storage Device

HardwareID = USB\Vid_0ea0&Pid_2118&Rev_0200

CompatibleIDs = USB\Class_08&SubClass_06&Prot_50

It can be found in USB Section of Your Windows registry.

and, perhaps, some addon info

0

Share this post


Link to post
Share on other sites

Woohooooo! Thank you for this driver package!

I can finally use my KB Gear JamP3 MP3 player as two* USB Mass Storage removable disks with 98SE (just like it works on Me, 2000 and XP) without having to use that crappy MusicMatch Jukebox. (AKA MusicMunch Junkbox.)

*16meg built in RAM plus up to 64meg MMC removable.

0

Share this post


Link to post
Share on other sites

Here the registry information for the Sweex 16-in-1 card reader:

[HKEY_LOCAL_MACHINE\Enum\USB\VID_0DDA&PID_2027\0000001]
"Capabilities"=hex:14,00,00,00
"HardwareID"="USB\\VID_0DDA&PID_2027&REV_016>,USB\\VID_0DDA&PID_2027"
"CompatibleIDs"="USB\\CLASS_08&SUBCLASS_06&PROT_50,USB\\CLASS_08&SUBCLASS_06,USB\\CLASS_08"
"DeviceDesc"="USB 2.0 card reader DEMO board with Generic brand name (MaskROM version)"
"Class"="USB"
"Driver"="USB\\0015"
"DriverVersion"="V2.14"
"FirmwareBCD"="V016E"
"Mfg"="GENERIC"
"ClassGUID"="{36FC9E60-C465-11CF-8056-444553540000}"
"ConfigFlags"=hex:00,00,00,00
"Serial"=hex:0e,00,00,00,00,00,00,00
"SymbolicName"="\\DosDevices\\000000000000000e#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"

[HKEY_LOCAL_MACHINE\Enum\USB\VID_11F5&PID_0001\0123456789]
"Capabilities"=hex:94,00,00,00
"HardwareID"="USB\\VID_11F5&PID_0001&REV_0001,USB\\VID_11F5&PID_0001"
"CompatibleIDs"="USB\\DEVCLASS_00&SUBCLASS_00&PROT_00,USB\\DEVCLASS_00&SUBCLASS_00,USB\\DEVCLASS_00,USB\\COMPOSITE"
"DeviceDesc"="Samengesteld USB-apparaat"
"ClassGUID"="{36FC9E60-C465-11CF-8056-444553540000}"
"Class"="USB"
"Driver"="USB\\0010"
"Mfg"="(Standaard USB-host-controller)"
"ConfigFlags"=hex:00,00,00,00
"Serial"=hex:09,00,00,00,00,00,00,00
"SymbolicName"="\\DosDevices\\0000000000000009#{a5dcbf10-6530-11d2-901f-00c04fb951ed}"

[HKEY_LOCAL_MACHINE\Enum\USBSYS9X\DISK\0000USB&VID_0DDA&PID_2027&0000001]
"Capabilities"=hex:00,00,00,00
"HardwareID"="USBSYS9X\\DISK"
"Class"="hdc"
"Driver"="hdc\\0003"
"Mfg"="GENERIC"
"ClassGUID"="{4d36e96a-e325-11ce-bfc1-08002be10318}"
"DeviceDesc"="USB Mass Storage Disk Driver"
"ConfigFlags"=hex:00,00,00,00

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.