Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically. 



maximus-decim

Maximus-Decim Native USB Drivers

Recommended Posts

Max_04    0
Maximus Decim Native USB ver.3.1

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.1 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

------------------------------------------------------------------------

English: http://rapidshare.com/files/19858514/nusb31e.exe.html

Russian: http://rapidshare.com/files/19858375/nusb31r.exe.html

What's new?

*Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys

*CnMemore replaced Skymedi

Please stop with this rapidshare, there are at least one hundred free upload service better!!!!

Share this post


Link to post
Share on other sites

Analada    0
Maximus Decim Native USB ver.3.1

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.1 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

------------------------------------------------------------------------

English: http://rapidshare.com/files/19858514/nusb31e.exe.html

Russian: http://rapidshare.com/files/19858375/nusb31r.exe.html

What's new?

*Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys

*CnMemore replaced Skymedi

Please stop with this rapidshare, there are at least one hundred free upload service better!!!!

Phew! Second the opinion on [not] rapidshare. But, hey, thanks to maximus-decim for the great job he's doing!

BTW what did wdmstub.sys do or otherwise to warrant its removal?

Share this post


Link to post
Share on other sites
wildtollwut    0
the driver works quite good, except for the fact that i receive a bsod after removing my (usb-2.0-) memory stick. however to see it working (i.e. reading and writing) is a huge improvement, since before my system would crash upon inserting :)

is this a known bug or simply incompatible with my hardware (via kt800, socket 754)?

Did you stop the device before removing? I'm asking because XP doesn't complain when removing devices directly but in 98/ME/2k you need to stop them first using the system tray icon, and if you do not do that, in Windows 98, you'll get a BSOD.

yep, crashes no matter i stop the device or not :-/

could 3.1 fix this?

Edited by wildtollwut

Share this post


Link to post
Share on other sites

The Microsoft Xbox cam named Live Vision (A really nice cam for Xbox360 and compters) dont work, I can download the INF file from WU but it crashes.

-- Thank you for the new NUSB :)

Edited by chuckbourdeau

Share this post


Link to post
Share on other sites
ultrashadow    0

Maximus Decim Native USB ver.3.1

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.1 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

Instructions say to uninstall current usb drivers. I have a Jumpdrive Trio that is working just fine under win98 (takes SMS, SD, XD), and one of those frustrating valgear GXT usb keys (GXT-64MB-PD to be exact) that won't work in win98. Does this mean I have to rip out my good trio drivers, or can I just supplement them with the NUSB install?

Thanks

Edited by ultrashadow

Share this post


Link to post
Share on other sites
hwtan    0

I just installed NUSB 3.0e last week. It works great. It is even faster than the original driver for my Kingston DTII. It detects faster and I can unplug the thumb drive without worrying that the computer will hang when shut down. Great job Maximus Decim. Thanks.

Now, what should I expect from NUSB 3.1e?

Share this post


Link to post
Share on other sites
soporific    0
What's new?

Hey there MD, been using NUSB for a while now and its great! Thanks ...

However, it would be excellent to have the installer package behave like other MS hotfixes, ie if you use the /Q:A /R:N switch, the installer shouldn't prompt to reboot. When i first tried 3.0 out it seemed to work as expected. But when i use it inside Auto-Patcher within the batch script, the reboot prompt appears (i'm assuming 3.1 does the same). I've made my own installer to get around this, but just letting you know that this is happening and that at the moment i'm packaging my own version of NUSB31 for inclusion in AP.

Hope that's OK ... sop.

EDIT: actually i'm still having problems, my installer is doing the same thing --- i can't seem to be able to create an unattended installer -- is this by design? I understand that the reboot has to occur at some point, and i am coding the update to install by itself and immediately reboot but it seems its not enough

... is there something in the INF file i can change to stop the reboot prompt?

Edited by soporific

Share this post


Link to post
Share on other sites
MDGx    0
... is there something in the INF file i can change to stop the reboot prompt?
To stop reboot and/or reboot prompt from INF:

[Version]

Signature=$CHICAGO$

AdvancedINF=2.5

[DefaultInstall]

SmartReboot=N

Reboot=0

[DefaultUninstall]

SmartReboot=N

Reboot=0

To stop reboot and/or reboot prompt from SED:

[Options]

RebootMode=N

To force automatic reboot [without prompt most of the time] from INF:

[Version]

Signature=$CHICAGO$

AdvancedINF=2.5

[DefaultInstall]

UpdateInis=WX

SmartReboot=AS

Reboot=1

[DefaultUninstall]

UpdateInis=WX

SmartReboot=AS

Reboot=1

[WX]

WININIT.INI,Rename,,"NUL=%10%\WININIT.LOG"

WININIT.INI,Rename,,"DIRNUL=%31%\_RESTORE\TEMP"

To force automatic reboot [without prompt most of the time] from SED:

[Options]

RebootMode=IS

HTH

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Recently Browsing   0 members

    No registered users viewing this page.

×