• Announcements

    • xper

      MSFN Sponsorship and AdBlockers!   07/10/2016

      Dear members, MSFN is made available via subscriptions, donations and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, become a site sponsor and ads will be disabled automatically and by subscribing you get other sponsor benefits.
maximus-decim

Maximus-Decim Native USB Drivers

804 posts in this topic

I need some help, using NUSB v2.2, when i try to install my Sony USB floppy drive i get a BSOD. It's a fatal exception 00 @ 0028:1837AE4 in VXD DiskTSD (03). My computer is a laptop and the BSOD happens when i insert the floppy drive in the modular bay or when i connect it to a USB port. And, i believe the drive is USB 2.0, is there any way to get USB 2.0 to work in 98SE, by the way?

thanks.

NUSB support of USB floppy drives is broken, it should be removed, I wrote about it in this thread twice already but it was not corrected yet.

Use manufacturer supplied driver instead.

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:

--------[ PCI Devices ]-----------------------------------------------------------------

[ VIA USB 2.0 Enhanced Host Controller ]

Device Properties:
Device Description VIA USB 2.0 Enhanced Host Controller
Bus Type PCI
Bus / Device / Function 2 / 4 / 2
Device ID 1106-3104
Subsystem ID 1106-3104
Device Class 0C03 (USB Controller)
Revision 63
Fast Back-to-Back Transactions Not Supported

Device Features:
66 MHz Operation Not Supported
Bus Mastering Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr

0

Share this post


Link to post
Share on other sites

Petr

why don't you fix the problem above

we can't put all i hope & depends in one person to

keep a updated system.If we do we will never get our system up to date

/bugless free

Its seem that everyone who start a project don't care to finish it

or take too long to make adjustments and updates

0

Share this post


Link to post
Share on other sites

Hu$tle,

nobody has replied to my observations and suggestions so I have no idea what is the real dimension of the problem, it looked like just and only I have the problem. I have reported the problem in this thread on May 2 2005, more than 19 months ago.

There was suggestion to use Microsoft umss driver instead of these partially working files taken from Windows Me, but I never was able to compile it and again nobody was interested in this way.

If everybody is happy with the current state why should I try to change it?

Petr

0

Share this post


Link to post
Share on other sites

Since support of USB floppy drives is broken, does anyone know where i can find a 'manufacturer' driver? I tried Sony's site, but i couldn't find it. My laptop is NOT a Sony, is a Dell, ONLY the floppy drive is a Sony; at least, that's what NUSB detected it as...

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:

--------[ PCI Devices ]-----------------------------------------------------------------

[ VIA USB 2.0 Enhanced Host Controller ]

Device Properties:
Device Description VIA USB 2.0 Enhanced Host Controller
Bus Type PCI
Bus / Device / Function 2 / 4 / 2
Device ID 1106-3104
Subsystem ID 1106-3104
Device Class 0C03 (USB Controller)
Revision 63
Fast Back-to-Back Transactions Not Supported

Device Features:
66 MHz Operation Not Supported
Bus Mastering Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr

Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.

0

Share this post


Link to post
Share on other sites
Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.

Then you can use any of the following Orangeware USB 2.0 drivers:

ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)

http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.org/petr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).

At least post idVendor and idProduct.

Here are some Windows 98 drivers for Sony USB FDD:

http://sony.storagesupport.com/floppydrive/mpf82e.htm

http://www-3.ibm.com/pc/support/site.wss/d...cid=MIGR-4P52BK

http://sony.storagesupport.com/floppydrive...in98drivers.zip

Regards,

Petr

Edited by Petr
0

Share this post


Link to post
Share on other sites
Then you can use any of the following Orangeware USB 2.0 drivers:

ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)

http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.org/petr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).

At least post idVendor and idProduct.

I had to do this on my newer PC, because once i plug in the drive in the laptop, 98 goes straight ahead and detects it, followed by the BSOD. I would need to uninstall NUSB, right? But i can't do that from Add/Remove programs...Anyway, here's what Usb View reported on my new PC:

idVendor: 0x054C (Sony Corp.)

idProduct: 0x002C

I'll try these ASAP. Thanks a lot.

0

Share this post


Link to post
Share on other sites

Then you can use any of the following Orangeware USB 2.0 drivers:

ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)

http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

No both, of course. Both drivers are made by Orangeware, the first one is special Intel edition with support of ICH4 and ICH5 southbridges and Windows 9x only, it is dated 4/01/2003. The second one is newest Orangeware driver for Windows 9x/2000/XP, supports ICH4 only and is dated 3/1/2006.

I don't know which one will be better for you.

idVendor: 0x054C (Sony Corp.)

idProduct: 0x002C

This ID is supported by these drivers:

http://sony.storagesupport.com/floppydrive/mpf82e.htm

http://sony.storagesupport.com/floppydrive...in98drivers.zip

Edited by Petr
0

Share this post


Link to post
Share on other sites
idVendor: 0x054C (Sony Corp.)

idProduct: 0x002C

This ID is supported by these drivers:

http://sony.storagesupport.com/floppydrive/mpf82e.htm

http://sony.storagesupport.com/floppydrive...in98drivers.zip

That's great, but, because i don't have a floppy drive or internet access on the laptop, how can i transfer files from my new PC to it? The laptop has a parallel port, but my new PC does NOT, so that option is out. The only way i know of, is via USB, but i don't have the right USB cord (it's the one with two male ends, right?) Also, I don't know enough about networking to figure how (i.e. type of network cord) i should use to connect the NIC's of both computers.

0

Share this post


Link to post
Share on other sites

It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?

0

Share this post


Link to post
Share on other sites

in nero you can save the session and you can add files later as long as you set the multisession option

0

Share this post


Link to post
Share on other sites
It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?

A CD is what......10 cents if that much?

:lol:

0

Share this post


Link to post
Share on other sites

i think it depends where you live i might have to pay almost $1 maybe for a cd

0

Share this post


Link to post
Share on other sites

1. Ever heard of CD-RW (rewritable CD)?

2. I get TDK DVDs here for less than $1/pc. Jewel case included. CDs are about 5pc. for $1.

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.

0

Share this post


Link to post
Share on other sites
in nero you can save the session and you can add files later as long as you set the multisession option

This almost never works for me with CD-R's. I am using nero 5.5.9.17, the check box for multisession is grayed out. I believe this also happens with me on nero 6.0.0.9.

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.

Do you mean crossover cable? I think your right, but i'd rather not waste my money and buy one. With some effort, can't you change a straight cable to crossover and back again? And yes, i've heard of CD-RW's and those are the expensive discs. Luckily, i found a few, so i'm using one of them now.

0

Share this post


Link to post
Share on other sites

Modifying a cable is not that easy, as you would have to replace the RJ45 outlets each time. You can find documentation on Standard ad Cross-over cables here.

As for Nero's multisession, I don't know what to say, it always worked for me in v5.5, 6.0 and 7.0. Not sure if it could have something to do with your particular burner hardware, I tested with a TEAC CD-W552 CD-burner and a Samsung SH-S182D DVD-burner. Just make sure you don't mix sessions burned with different types of software. I had some multisession CDs destroyed long time ago because first session was burned with Roxio and second one with Nero.

0

Share this post


Link to post
Share on other sites

Didn't want to open a new topic for this, so here it is...

I found an overclocking USB mouse driver for 98SE and it seems it also works with WinME [and all other NTx Win32 OSes].

Found here:

http://www.esreality.com/?a=post&id=1265679

File [386 KB, English + Russian]:

http://sweetlow.at.tut.by/download/hidusbf.zip

Mouse drivers web site [Russian]:

http://www.overclockers.ru/lab/15925.shtml

Make sure you read README.ENG.TXT [English] or README.RUS.TXT [Russian] first.

Have fun.

0

Share this post


Link to post
Share on other sites

I have some problems with this download. I installed the NUSB and restarted the computer. Afterwards, I connected my USB Flash Drive into the USB port. Nothing happened. So I went to control panel and went to Add Hardware and started the search. I find the USB drive in the list and said it had problem. So I try to push the update driver button and directed to the WINDOWS folder, it detected a driver and asked me to restart it. So I did. When I came back on I replugged the USB and it doesn't do anything. And when I went back to Add Hardware it still said there were problem with the driver. Help? Btw, I reinstalled like 3 times.

Edit: Turns out that my USB driver malfunctioned.

Edited by USBUser
0

Share this post


Link to post
Share on other sites

Maximus Decim Native USB ver.2.4

------------------------------------------------------------------------

Only for Windows 98SE !!!

Native (without installation of additional drivers

for each type) support USB flash drives, digital

photo and videocameras and other similar devices.

Remember! You install it at own risk!

Before installation remove ALL of driver

USB flash drivs, available in system.

------------------------------------------------------------------------

English: http://rapidshare.com/files/8871959/nusb24e.exe.html

Russian: http://rapidshare.com/files/8871320/nusb24r.exe.html

What's new?

1.Add Apple iPod support

0

Share this post


Link to post
Share on other sites
What's new?

1.Add Apple iPod support

Have you removed USB FDD support finally?

Petr

0

Share this post


Link to post
Share on other sites
Have you removed USB FDD support finally?

Well, according to this:

%USB\VID_03EE&PID_6901.DeviceDesc%=USBSTOR_CBI,USB\VID_03EE&PID_6901
USB\VID_03EE&PID_6901.DeviceDesc = "Mitsumi USB Floppy"

seems no. Are you stating that all USB FDDs will fail?

0

Share this post


Link to post
Share on other sites
Have you removed USB FDD support finally?

Well, according to this:

%USB\VID_03EE&PID_6901.DeviceDesc%=USBSTOR_CBI,USB\VID_03EE&PID_6901
USB\VID_03EE&PID_6901.DeviceDesc = "Mitsumi USB Floppy"

seems no. Are you stating that all USB FDDs will fail?

I'm discussing this topic here for more than 1.5 year and nobody reported any success.

The problem seems to be in Win98 DISKTSD.VXD that is incompatible with Windows Me files contained in NUSB - and Windows Me DISKTSD.VXD is incompatible with Windows 98 SE.

Petr

0

Share this post


Link to post
Share on other sites

It should be tested if any of USB FDD driver is so generic that it can be used with any USB FDD.

Petr

Edited by Petr
0

Share this post


Link to post
Share on other sites

I see where u coming from Petr most of these people don't try to fix the problem @ hand

they just update them and adding more support doesn't fix the problem.

sometimes u gotta fix things yourself.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.