Jump to content

Welcome to MSFN Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account



Photo

Maximus-Decim Native USB Drivers

* * * * * 1 votes

  • Please log in to reply
786 replies to this topic

#201
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag

I need some help, using NUSB v2.2, when i try to install my Sony USB floppy drive i get a BSOD. It's a fatal exception 00 @ 0028:1837AE4 in VXD DiskTSD (03). My computer is a laptop and the BSOD happens when i insert the floppy drive in the modular bay or when i connect it to a USB port. And, i believe the drive is USB 2.0, is there any way to get USB 2.0 to work in 98SE, by the way?

thanks.


NUSB support of USB floppy drives is broken, it should be removed, I wrote about it in this thread twice already but it was not corrected yet.

Use manufacturer supplied driver instead.

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:
--------[ PCI Devices ]-----------------------------------------------------------------

  [ VIA USB 2.0 Enhanced Host Controller ]

	Device Properties:
	  Device Description								VIA USB 2.0 Enhanced Host Controller
	  Bus Type										  PCI
	  Bus / Device / Function						   2 / 4 / 2
	  Device ID										 1106-3104
	  Subsystem ID									  1106-3104
	  Device Class									  0C03 (USB Controller)
	  Revision										  63
	  Fast Back-to-Back Transactions					Not Supported

	Device Features:
	  66 MHz Operation								  Not Supported
	  Bus Mastering									 Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr


How to remove advertisement from MSFN

#202
Hu$tle

Hu$tle

    Junior

  • Banned
  • Pip
  • 86 posts
  • Joined 29-June 06
Petr
why don't you fix the problem above
we can't put all i hope & depends in one person to
keep a updated system.If we do we will never get our system up to date
/bugless free
Its seem that everyone who start a project don't care to finish it
or take too long to make adjustments and updates

#203
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag
Hu$tle,

nobody has replied to my observations and suggestions so I have no idea what is the real dimension of the problem, it looked like just and only I have the problem. I have reported the problem in this thread on May 2 2005, more than 19 months ago.

There was suggestion to use Microsoft umss driver instead of these partially working files taken from Windows Me, but I never was able to compile it and again nobody was interested in this way.

If everybody is happy with the current state why should I try to change it?

Petr

#204
seskanda

seskanda

    Member

  • Member
  • Pip
  • 53 posts
  • Joined 30-December 05
Since support of USB floppy drives is broken, does anyone know where i can find a 'manufacturer' driver? I tried Sony's site, but i couldn't find it. My laptop is NOT a Sony, is a Dell, ONLY the floppy drive is a Sony; at least, that's what NUSB detected it as...

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:

--------[ PCI Devices ]-----------------------------------------------------------------

  [ VIA USB 2.0 Enhanced Host Controller ]

	Device Properties:
	  Device Description								VIA USB 2.0 Enhanced Host Controller
	  Bus Type										  PCI
	  Bus / Device / Function						   2 / 4 / 2
	  Device ID										 1106-3104
	  Subsystem ID									  1106-3104
	  Device Class									  0C03 (USB Controller)
	  Revision										  63
	  Fast Back-to-Back Transactions					Not Supported

	Device Features:
	  66 MHz Operation								  Not Supported
	  Bus Mastering									 Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr


Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.

#205
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag

Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.


Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.o...etr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).
At least post idVendor and idProduct.

Here are some Windows 98 drivers for Sony USB FDD:
http://sony.storages...rive/mpf82e.htm
http://www-3.ibm.com...cid=MIGR-4P52BK
http://sony.storages...in98drivers.zip

Regards,

Petr

Edited by Petr, 03 December 2006 - 05:14 PM.


#206
seskanda

seskanda

    Member

  • Member
  • Pip
  • 53 posts
  • Joined 30-December 05

Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)


But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.o...etr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).
At least post idVendor and idProduct.


I had to do this on my newer PC, because once i plug in the drive in the laptop, 98 goes straight ahead and detects it, followed by the BSOD. I would need to uninstall NUSB, right? But i can't do that from Add/Remove programs...Anyway, here's what Usb View reported on my new PC:

idVendor: 0x054C (Sony Corp.)

idProduct: 0x002C

Here are some Windows 98 drivers for Sony USB FDD:
http://sony.storages...rive/mpf82e.htm
http://www-3.ibm.com...cid=MIGR-4P52BK
http://sony.storages...in98drivers.zip .


I'll try these ASAP. Thanks a lot.

#207
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag



Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.com/pub/driver2/intel_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)


But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

No both, of course. Both drivers are made by Orangeware, the first one is special Intel edition with support of ICH4 and ICH5 southbridges and Windows 9x only, it is dated 4/01/2003. The second one is newest Orangeware driver for Windows 9x/2000/XP, supports ICH4 only and is dated 3/1/2006.

I don't know which one will be better for you.

idVendor: 0x054C (Sony Corp.)
idProduct: 0x002C


This ID is supported by these drivers:
http://sony.storages...rive/mpf82e.htm
http://sony.storages...in98drivers.zip

Edited by Petr, 04 December 2006 - 01:16 AM.


#208
seskanda

seskanda

    Member

  • Member
  • Pip
  • 53 posts
  • Joined 30-December 05

idVendor: 0x054C (Sony Corp.)
idProduct: 0x002C

This ID is supported by these drivers:
http://sony.storages...rive/mpf82e.htm
http://sony.storages...in98drivers.zip


That's great, but, because i don't have a floppy drive or internet access on the laptop, how can i transfer files from my new PC to it? The laptop has a parallel port, but my new PC does NOT, so that option is out. The only way i know of, is via USB, but i don't have the right USB cord (it's the one with two male ends, right?) Also, I don't know enough about networking to figure how (i.e. type of network cord) i should use to connect the NIC's of both computers.

#209
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag
Maybe your laptop has CD-ROM?

#210
seskanda

seskanda

    Member

  • Member
  • Pip
  • 53 posts
  • Joined 30-December 05
It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?

#211
awergh

awergh

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,059 posts
  • Joined 02-October 05
  • OS:none specified
  • Country: Country Flag
in nero you can save the session and you can add files later as long as you set the multisession option

#212
jasinwa

jasinwa

    Member

  • Member
  • PipPip
  • 126 posts
  • Joined 10-February 05

It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?


A CD is what......10 cents if that much?

:lol:

#213
awergh

awergh

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,059 posts
  • Joined 02-October 05
  • OS:none specified
  • Country: Country Flag
i think it depends where you live i might have to pay almost $1 maybe for a cd

#214
Drugwash

Drugwash

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,262 posts
  • Joined 21-June 06
  • OS:98SE
  • Country: Country Flag
1. Ever heard of CD-RW (rewritable CD)?

2. I get TDK DVDs here for less than $1/pc. Jewel case included. CDs are about 5pc. for $1.

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.

#215
seskanda

seskanda

    Member

  • Member
  • Pip
  • 53 posts
  • Joined 30-December 05

in nero you can save the session and you can add files later as long as you set the multisession option


This almost never works for me with CD-R's. I am using nero 5.5.9.17, the check box for multisession is grayed out. I believe this also happens with me on nero 6.0.0.9.

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.


Do you mean crossover cable? I think your right, but i'd rather not waste my money and buy one. With some effort, can't you change a straight cable to crossover and back again? And yes, i've heard of CD-RW's and those are the expensive discs. Luckily, i found a few, so i'm using one of them now.

#216
Drugwash

Drugwash

    MSFN Expert

  • Member
  • PipPipPipPipPipPip
  • 1,262 posts
  • Joined 21-June 06
  • OS:98SE
  • Country: Country Flag
Modifying a cable is not that easy, as you would have to replace the RJ45 outlets each time. You can find documentation on Standard ad Cross-over cables here.

As for Nero's multisession, I don't know what to say, it always worked for me in v5.5, 6.0 and 7.0. Not sure if it could have something to do with your particular burner hardware, I tested with a TEAC CD-W552 CD-burner and a Samsung SH-S182D DVD-burner. Just make sure you don't mix sessions burned with different types of software. I had some multisession CDs destroyed long time ago because first session was burned with Roxio and second one with Nero.

#217
MDGx

MDGx

    98SE2ME + 98MP10

  • Super Moderator
  • 2,678 posts
  • Joined 22-November 04
  • OS:none specified
  • Country: Country Flag
Didn't want to open a new topic for this, so here it is...

I found an overclocking USB mouse driver for 98SE and it seems it also works with WinME [and all other NTx Win32 OSes].

Found here:
http://www.esreality...post&id=1265679
File [386 KB, English + Russian]:
http://sweetlow.at.t...oad/hidusbf.zip
Mouse drivers web site [Russian]:
http://www.overclock...lab/15925.shtml

Make sure you read README.ENG.TXT [English] or README.RUS.TXT [Russian] first.

Have fun.

#218
USBUser

USBUser
  • Member
  • 1 posts
  • Joined 24-December 06
I have some problems with this download. I installed the NUSB and restarted the computer. Afterwards, I connected my USB Flash Drive into the USB port. Nothing happened. So I went to control panel and went to Add Hardware and started the search. I find the USB drive in the list and said it had problem. So I try to push the update driver button and directed to the WINDOWS folder, it detected a driver and asked me to restart it. So I did. When I came back on I replugged the USB and it doesn't do anything. And when I went back to Add Hardware it still said there were problem with the driver. Help? Btw, I reinstalled like 3 times.

Edit: Turns out that my USB driver malfunctioned.

Edited by USBUser, 24 December 2006 - 09:42 PM.


#219
maximus-decim

maximus-decim

    Junior

  • Member
  • Pip
  • 90 posts
  • Joined 08-February 05
  • OS:98SE
  • Country: Country Flag
Maximus Decim Native USB ver.2.4
------------------------------------------------------------------------
Only for Windows 98SE !!!
Native (without installation of additional drivers
for each type) support USB flash drives, digital
photo and videocameras and other similar devices.
Remember! You install it at own risk!
Before installation remove ALL of driver
USB flash drivs, available in system.
------------------------------------------------------------------------
English: http://rapidshare.co...usb24e.exe.html
Russian: http://rapidshare.co...usb24r.exe.html

What's new?
1.Add Apple iPod support

#220
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag

What's new?
1.Add Apple iPod support


Have you removed USB FDD support finally?

Petr

#221
Tihiy

Tihiy

    the creator

  • Member
  • PipPipPipPipPipPipPip
  • 1,941 posts
  • Joined 19-November 04
  • OS:Windows 7 x64
  • Country: Country Flag

Donator

Have you removed USB FDD support finally?

Well, according to this:
%USB\VID_03EE&PID_6901.DeviceDesc%=USBSTOR_CBI,USB\VID_03EE&PID_6901
USB\VID_03EE&PID_6901.DeviceDesc = "Mitsumi USB Floppy"
seems no. Are you stating that all USB FDDs will fail?

#222
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag

Have you removed USB FDD support finally?

Well, according to this:
%USB\VID_03EE&PID_6901.DeviceDesc%=USBSTOR_CBI,USB\VID_03EE&PID_6901
USB\VID_03EE&PID_6901.DeviceDesc = "Mitsumi USB Floppy"
seems no. Are you stating that all USB FDDs will fail?


I'm discussing this topic here for more than 1.5 year and nobody reported any success.

The problem seems to be in Win98 DISKTSD.VXD that is incompatible with Windows Me files contained in NUSB - and Windows Me DISKTSD.VXD is incompatible with Windows 98 SE.

Petr

#223
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • Joined 15-April 05
  • OS:98SE
  • Country: Country Flag
It should be tested if any of USB FDD driver is so generic that it can be used with any USB FDD.

Petr

Edited by Petr, 25 December 2006 - 08:11 AM.


#224
PROBLEMCHYLD

PROBLEMCHYLD

    The Resurrector for old Windows OS

  • Member
  • PipPipPipPipPipPipPipPip
  • 2,531 posts
  • Joined 07-October 05
  • OS:98SE
  • Country: Country Flag
I see where u coming from Petr most of these people don't try to fix the problem @ hand
they just update them and adding more support doesn't fix the problem.
sometimes u gotta fix things yourself.

Believe God is the Alpha and Omega.
Believe Jesus Christ died for our sins.
Repent for your sins now or there will be
BLOOD

The Path to God


U98SESP3 03-11-2013


#225
MDGx

MDGx

    98SE2ME + 98MP10

  • Super Moderator
  • 2,678 posts
  • Joined 22-November 04
  • OS:none specified
  • Country: Country Flag
NUSB here:
http://www.mdgx.com/web.htm#NUS

* Unofficial Windows 98 SE Native USB Drivers (NUSB) 2.4:
http://www.msfn.org/...showtopic=43605
NUSB [649 KB, English, free]:
http://www.mdgx.com/spx/NUSB24.EXE




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users