[Petr]

seskanda, on Dec 3 2006, 11:31 AM, said:

I need some help, using NUSB v2.2, when i try to install my Sony USB floppy drive i get a BSOD. It's a fatal exception 00 @ 0028:1837AE4 in VXD DiskTSD (03). My computer is a laptop and the BSOD happens when i insert the floppy drive in the modular bay or when i connect it to a USB port. And, i believe the drive is USB 2.0, is there any way to get USB 2.0 to work in 98SE, by the way?

thanks.

NUSB support of USB floppy drives is broken, it should be removed, I wrote about it in this thread twice already but it was not corrected yet.

Use manufacturer supplied driver instead.

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:

--------[ PCI Devices ]-----------------------------------------------------------------

  [ VIA USB 2.0 Enhanced Host Controller ]

	Device Properties:
	  Device Description								VIA USB 2.0 Enhanced Host Controller
	  Bus Type										  PCI
	  Bus / Device / Function						   2 / 4 / 2
	  Device ID										 1106-3104
	  Subsystem ID									  1106-3104
	  Device Class									  0C03 (USB Controller)
	  Revision										  63
	  Fast Back-to-Back Transactions					Not Supported

	Device Features:
	  66 MHz Operation								  Not Supported
	  Bus Mastering									 Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr

[Hu$tle]

Petr
why don't you fix the problem above
we can't put all i hope & depends in one person to
keep a updated system.If we do we will never get our system up to date
/bugless free
Its seem that everyone who start a project don't care to finish it
or take too long to make adjustments and updates

[Petr]

Hu$tle,

nobody has replied to my observations and suggestions so I have no idea what is the real dimension of the problem, it looked like just and only I have the problem. I have reported the problem in this thread on May 2 2005, more than 19 months ago.

There was suggestion to use Microsoft umss driver instead of these partially working files taken from Windows Me, but I never was able to compile it and again nobody was interested in this way.

If everybody is happy with the current state why should I try to change it?

Petr

[seskanda]

Since support of USB floppy drives is broken, does anyone know where i can find a 'manufacturer' driver? I tried Sony's site, but i couldn't find it. My laptop is NOT a Sony, is a Dell, ONLY the floppy drive is a Sony; at least, that's what NUSB detected it as...

Petr, on Dec 3 2006, 08:49 AM, said:

You need manufacturer supplied driver to support USB 2.0 in Windows 98, you can use Everest to identify the USB 2.0 controller, this is the example:

--------[ PCI Devices ]-----------------------------------------------------------------

  [ VIA USB 2.0 Enhanced Host Controller ]

	Device Properties:
	  Device Description								VIA USB 2.0 Enhanced Host Controller
	  Bus Type										  PCI
	  Bus / Device / Function						   2 / 4 / 2
	  Device ID										 1106-3104
	  Subsystem ID									  1106-3104
	  Device Class									  0C03 (USB Controller)
	  Revision										  63
	  Fast Back-to-Back Transactions					Not Supported

	Device Features:
	  66 MHz Operation								  Not Supported
	  Bus Mastering									 Enabled

The important information is Device ID, Subsystem ID and Revision.

Then I can point you to the right driver in case it exists.

Petr

Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.

[Petr]

seskanda, on Dec 3 2006, 10:35 PM, said:

Everest reports my mobo as 'Dell Inspiron 600m' and the chipset as 'Intel Odem i855'. Everest reports the USB 2.0 controller as 'Intel 82801DB(M) ICH4(-M) - Enhanced USB2 controller' Device ID: 8086-24CD. Subsystem ID: 1028-011E. Revision 01. I already installed the 'Intel Mobile Chipset' driver from the Dell ResourceCD, but it did NOT install a USB 2.0 controller.

Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.c...el_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.o...etr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).
At least post idVendor and idProduct.

Here are some Windows 98 drivers for Sony USB FDD:
http://sony.storages...rive/mpf82e.htm
http://www-3.ibm.com/pc/support/site.wss/d...cid=MIGR-4P52BK
http://sony.storagesupport.com/floppydrive...in98drivers.zip

Regards,

Petr

This post has been edited by Petr: 03 December 2006 - 05:14 PM

[seskanda]

Petr, on Dec 3 2006, 05:56 PM, said:

Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.c...el_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

Petr, on Dec 3 2006, 05:56 PM, said:

Regarding the Sony USB floppy drive, what model do you have? You can read it by http://old.winpack.o...etr/usbview.exe utility, just check "Config Descriptors" and "Refresh" (F5).
At least post idVendor and idProduct.

I had to do this on my newer PC, because once i plug in the drive in the laptop, 98 goes straight ahead and detects it, followed by the BSOD. I would need to uninstall NUSB, right? But i can't do that from Add/Remove programs...Anyway, here's what Usb View reported on my new PC:

idVendor: 0x054C (Sony Corp.)

idProduct: 0x002C

Petr, on Dec 3 2006, 05:56 PM, said:

Here are some Windows 98 drivers for Sony USB FDD:
http://sony.storages...rive/mpf82e.htm
http://www-3.ibm.com/pc/support/site.wss/d...cid=MIGR-4P52BK
http://sony.storagesupport.com/floppydrive...in98drivers.zip .

I'll try these ASAP. Thanks a lot.

[Petr]

seskanda, on Dec 4 2006, 02:15 AM, said:

Petr, on Dec 3 2006, 05:56 PM, said:

Then you can use any of the following Orangeware USB 2.0 drivers:
ftp://ftp.abitshop.c...el_usb/1102.exe (version 1.01.0000.2)
http://old.winpack.org/petr/U2v242.exe (version 2.04.0002.0)

But NOT both, right? I think i'll try the first since it says 'Intel.' Thanks.

No both, of course. Both drivers are made by Orangeware, the first one is special Intel edition with support of ICH4 and ICH5 southbridges and Windows 9x only, it is dated 4/01/2003. The second one is newest Orangeware driver for Windows 9x/2000/XP, supports ICH4 only and is dated 3/1/2006.

I don't know which one will be better for you.

Quote

idVendor: 0x054C (Sony Corp.)
idProduct: 0x002C

This ID is supported by these drivers:
http://sony.storages...rive/mpf82e.htm
http://sony.storagesupport.com/floppydrive...in98drivers.zip

This post has been edited by Petr: 04 December 2006 - 01:16 AM

[seskanda]

Petr, on Dec 4 2006, 02:16 AM, said:

idVendor: 0x054C (Sony Corp.)
idProduct: 0x002C

This ID is supported by these drivers:
http://sony.storages...rive/mpf82e.htm
http://sony.storagesupport.com/floppydrive...in98drivers.zip

That's great, but, because i don't have a floppy drive or internet access on the laptop, how can i transfer files from my new PC to it? The laptop has a parallel port, but my new PC does NOT, so that option is out. The only way i know of, is via USB, but i don't have the right USB cord (it's the one with two male ends, right?) Also, I don't know enough about networking to figure how (i.e. type of network cord) i should use to connect the NIC's of both computers.

[Petr]

Maybe your laptop has CD-ROM?

[seskanda]

It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?

[awergh]

in nero you can save the session and you can add files later as long as you set the multisession option

[jasinwa]

seskanda, on Dec 4 2006, 05:14 PM, said:

It sure does, and my new PC has a DVD burner. But, I don't want to waste another Blank CD for a max. of 100 megs of drivers and such. Because i already have plenty of CD-R's with lots of free space on them. Is there a way to re-use/add data to these CD-R's if their capacity is NOT full?

A CD is what......10 cents if that much?

[awergh]

i think it depends where you live i might have to pay almost $1 maybe for a cd

[Drugwash]

1. Ever heard of CD-RW (rewritable CD)?

2. I get TDK DVDs here for less than $1/pc. Jewel case included. CDs are about 5pc. for $1.

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.

[seskanda]

awergh, on Dec 5 2006, 01:33 AM, said:

in nero you can save the session and you can add files later as long as you set the multisession option

This almost never works for me with CD-R's. I am using nero 5.5.9.17, the check box for multisession is grayed out. I believe this also happens with me on nero 6.0.0.9.

Drugwash, on Dec 7 2006, 12:29 PM, said:

3. Crosslink cable is what you need for connecting both machines' NICs. Make sure you set IPs in the same class (i.e 192.168.0.1 and 192.168.0.2) and workgroup is identical on both.

Do you mean crossover cable? I think your right, but i'd rather not waste my money and buy one. With some effort, can't you change a straight cable to crossover and back again? And yes, i've heard of CD-RW's and those are the expensive discs. Luckily, i found a few, so i'm using one of them now.

[Drugwash]

Modifying a cable is not that easy, as you would have to replace the RJ45 outlets each time. You can find documentation on Standard ad Cross-over cables here.

As for Nero's multisession, I don't know what to say, it always worked for me in v5.5, 6.0 and 7.0. Not sure if it could have something to do with your particular burner hardware, I tested with a TEAC CD-W552 CD-burner and a Samsung SH-S182D DVD-burner. Just make sure you don't mix sessions burned with different types of software. I had some multisession CDs destroyed long time ago because first session was burned with Roxio and second one with Nero.

[MDGx]

Didn't want to open a new topic for this, so here it is...

I found an overclocking USB mouse driver for 98SE and it seems it also works with WinME [and all other NTx Win32 OSes].

Found here:
http://www.esreality...post&id=1265679
File [386 KB, English + Russian]:
http://sweetlow.at.t...oad/hidusbf.zip
Mouse drivers web site [Russian]:
http://www.overclock...lab/15925.shtml

Make sure you read README.ENG.TXT [English] or README.RUS.TXT [Russian] first.

Have fun.

[USBUser]

I have some problems with this download. I installed the NUSB and restarted the computer. Afterwards, I connected my USB Flash Drive into the USB port. Nothing happened. So I went to control panel and went to Add Hardware and started the search. I find the USB drive in the list and said it had problem. So I try to push the update driver button and directed to the WINDOWS folder, it detected a driver and asked me to restart it. So I did. When I came back on I replugged the USB and it doesn't do anything. And when I went back to Add Hardware it still said there were problem with the driver. Help? Btw, I reinstalled like 3 times.

Edit: Turns out that my USB driver malfunctioned.

This post has been edited by USBUser: 24 December 2006 - 09:42 PM

[maximus-decim]

Maximus Decim Native USB ver.2.4
------------------------------------------------------------------------
Only for Windows 98SE !!!
Native (without installation of additional drivers
for each type) support USB flash drives, digital
photo and videocameras and other similar devices.
Remember! You install it at own risk!
Before installation remove ALL of driver
USB flash drivs, available in system.
------------------------------------------------------------------------
English: http://rapidshare.co...usb24e.exe.html
Russian: http://rapidshare.co...usb24r.exe.html

What's new?
1.Add Apple iPod support

[Petr]

maximus-decim, on Dec 25 2006, 11:32 AM, said:

What's new?
1.Add Apple iPod support

Have you removed USB FDD support finally?

Petr